Use PermaStripe Die-Cut Shapes with PermaStripe Rolls to create a complete line marking solution for warehouse and factory floors. Helping to achieve 5S Visual Management optimisation, PermaStripe improves workflow, safety and productivity with clearly marked bays and walkways, and is quick to install.

The system has been used to great effect in warehouses with continuous production that cannot afford the time to mark off and exclude areas for drying, or that work with products that could be tainted or contaiminated by solvents and smells from paints and resins. PermaStripe allows much quicker installation, working around the business rather than interupting, and allows areas to be used immediately after application.

The strength and durability of PermaStripe has seen it being used in aircraft hangars with heavy machinery, and logistics centres with lots of foot and vehicle traffic, without the need for replacement. Removal is possible and due to the thickness and extreme strength of PermaStripe, it will not snap when removed. This allows for easy 5S Visual Management changes in the workplace, unlike resin or painted lines.

A versatile system, PermaStripe Boot Shapes have been seen used in Airport Security Trays by flight security agencies, providing a clear indication and guidance for where passengers place their footwear, speeding up queues. The polyp­ro­pylene (PP) trays are normally difficult to stick to, but PermaStripe adheres perfectly. The boot markers are durable, lasting longer than painted shapes and stencils, and are quick to apply.

Permastripe is available in many different shapes, including the full alphabet and digits, resulting in neat joins for a more aesthetically-pleasing line marking system. The shapes work in conjunction with:

• PermaStripe Rolls
• Warehouse Marker Signs
• Warehouse Pallet Marker
• Heskins Permastripe Die-Cut Shapes (solid colours)
  

See the Heskins range of accessories for additional help during application, pro-longing the life of anti-slip tapes and line markings. The range consists of primers, edge fixing, mallets, rollers etc.

PermaStripe & PermaRoute; What’s the Difference?

Both products are designed to withstand testing warehouse and industrial environments, with subtle differences between them.

PermaStripe

A solid, homogenous piece of virgin plastic, PermaStripe is 1mm thick and extremely tough. The edges are feathered (sloped/curved) so that the material isn't a trip hazard, and the surface can be finished completely smooth for easier cleaning, or with a mild, non-slip emboss.

The solid homogenous construction ensures colours will not fade or be scratched off, or removed by harsh solvents such as MEK, toluene, etc. The thick plastic is hard to remove due to its strong adhesion, but removal is possible should line marking need to be altered.

PermaRoute

Perfectly flat, PermaRoute can be produced in much wider widths to create fully coloured walkways if needed, and the flat structure helps durability should vehciles need to turn on the material.

Made in 3 parts, the printed design is fully protected by a laminate with a mild non-slip emboss, with strong adhesive underneath. This construction allows printed logos and designs to be used.

Ordering References

More shapes, sizes, cuts and colours, etc, can be made to order - contact our sales team on 0113 2455450 or by email to discuss your requirements.

Shapes

• L - TL528 - 200mm x 200mm
• T - TL589 - 300mm x 200mm
• X - TL529 - 300mm x 300mm
• Dot - TL6 - 50mm diameter
• Dot - TL593 - 90mm diameter

Joins

• 90° Corner
• TL759 - 90mm x 90mm (To join 50mm wide rolls)
• TL1246 - 135mm x 135mm (To join 75mm wide rolls)
• TL469 - 180mm x 180mm​ (To join 100mm wide rolls)
• 45° Corner
• TL707 - 85mm x 70mm (For 50mm rolls)
• TL708 - 125mm x 115mm (For 75mm rolls)
• TL709 - 170mm x 140mm (For 100mm rolls)
• T Junction
• TL617 - 146mm x 100mm (For 50mm rolls)
• TL618 - 220mm x 150mm (For 75mm rolls)
• TL619 - 290mm x 200mm (For 100mm rolls)
• Bridge
• TL620 - 140mm x 70mm (For 50mm rolls)
• TL621 - 210mm x 105mm (For 75mm rolls)
• TL622 - 280mm x 140mm (For 100mm rolls)
• End Cap
• TL614 - 70mm x 35mm (For 50mm rolls)
• TL615 - 105mm x 52mm (For 75mm rolls)
• TL616 - 140mm x 70mm (For 100mm rolls)

Floor Markers

• L-Shape - TL1132 - 100mm x 100mm​
• T-Shape - TL1133 - 100mm x 150mm
• X-Shape - TL1131 - 150mm x 150mm
• Disc - TL131 - 100mm
• Arrow - TL1138 - 100mm x 200mm
• Line Block - TL1134 - 100mm x 200mm

Arrows

• Arrow - 90mm - TL527
• Arrow - Small - TL141 - 100mm x 65mm
• Arrow - Large - TL211 - 300mm x 230mm

Feet

Please note, price is per foot-shape. For a pair, add 2 items to your basket.

• Feet - TL99 - 57mm x 104mm
• Feet - TL100 - 120mm x 210mm
• Feet - TL37 - 280mm x 105mm
• Boot - TL29 - 240mm x 90mm
• Boot - TL242 - 300mm x 120mm

Product Data

The independent test laboratory at Adhesive Technical Services Ltd performed the temperature test, England.

Coefficient of Friction

The above tests were conducted in accordance with Pendulum, the tests were conducted at a recognised independent friction testing laboratory, and copy certificates are available on request.