Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Recommendations
• Application
• Cleaning
• Storage & Safety Instructions

Features & Benefits

   
• Mapecoat 4 LVT resists attack from the main strains of bacteria (Escherichia Coli, Staphylococcus Aureus, MRSA, Pseudomonas Aeruginosa), as it is tested according to the method described in the standard ISO 22196 “Measurement of antibacterial activity on plastics and other non-porous surfaces"
• Anti-slip polyurethane finish for internal areas, specifically designed to provide long-term protection and to be resistant to cleaning cycles and to the spread of mould - such characteristics are proven by passing the most stringent tests in accordance with the UNI 11021 standard
• Able to resist different washing agents (active chlorine products, alkaline degreasers, acid-based descalers) and disinfection agents in compliance with EN ISO 2812-1 standard
• When used in combination with Ultrabond Eco MS 4 LVT, silylated polymer-based reactive adhesive (or the thixotropic version Ultrabond Eco MS 4 LVT/Wall), along with the most suitable substrate preparation products and sealants for these types of application, it forms a complete, safe system for installing LVT in damp environments, including walls and floors in shower cabins
• Slip resistance in compliance with DIN 51130 and AS 4586: R11
• Slip resistance (barefoot) in compliance with DIN 51097 and AS 4586: A+B
• Slip resistance in compliance with EN 13036-4 (pendulum test): dry: 90; wet: 55 (class P5 according to AS 4586)
• Slip resistance (method B.C.R.): leather, dry surface (μ): 0.56; rubber, dry surface (μ): 0.74; rubber, wet surface (μ): 0.81
• EMICODE: EC1 - very low emission

Recommendations

• Do not use on external surfaces
• Use at temperatures between +10°C and +35°C
• Use only clean containers and tools
• Completely remove all traces of previous treatments in order to obtain an even finish
• Protect treated surfaces from direct sunlight and currents of air for the first 3 hours after application

Application

Preparation of the floor:

• The surface must be clean and dry and have no traces of oil, wax or any other contaminant
• Remove any remains or traces of adhesive that could affect adhesion from the surface with a red or green Ultracoat Pad

Preparation and application of the product:

• Shake component A before use and pour the product into a suitable clean tray
• Add component B at a ratio of comp. A : comp. B = 5 : 1 (by weight) and mix thoroughly until completely blended
• Apply the mix within 2 hours from blending
• Leave the product to stand for 5-10 minutes before applying one coat by mean of a short-pile roller or the airless spray system

Cleaning

• Tools and residuals of Mapecoat 4 LVT may be cleaned with water while the product is still fresh
• Once hardened, the product may only be removed mechanically

Storage & Safety Instructions

• 12 months in its original, sealed packaging in a dry place
• Protect from freezing weather
• For transport at low temperatures, use vehicles with temperature-controlled units
• Instructions for the safe use of our products can be found on the latest version of the Safety Data Sheet (see 'Data Sheets' section above)