- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Mapei Prosfas is a solvent-free, silicate-based consolidator for cementitious substrates, with a high penetration capacity.
- For professional use
- Deep consolidation of cementitious substrates with an unstable surface or with poor mechanical characteristics
- Consolidation of cementitious screeds which tend to have a crumbly surface due to hydration defects or a lack of binders
- Impregnation and anti-dust primer on cementitious surfaces
- Shelf life: 24 months
Quick Links - Click To Jump To Section:
Features & Benefits
- Prosfas is a blend of silicates in water solution with low viscosity and therefore high penetration properties
- It can penetrate to a depth of several centimetres and when dried, it improves the cohesion of cementitious surfaces
- Ready-to-use and need not be diluted
- Customs class: 3823 90 95
Recommendations
- Do not use Prosfas on non-absorbent or wet surfaces
- Do not use on Mapecem or Mapecem Pronto screeds
- Do not use on anhydrite surfaces
- Do not dilute with water or solvents
- Immediately clean up any drops of Prosfas from ceramic tile, glass, marble, and metal surfaces
How to Use
Substrate preparation:
- The substrate must be dry, clean, free of oils, varnish, levelling compounds and other materials which might prevent the Prosfas from penetrating
Application:
- Pour the Prosfas on the surface with a sprinkler or pump and distribute it evenly with a broom, brush, or roller until it is completely absorbed
- Very friable or porous substrates may need more than one coat, in which case wait until the previous coat is dry
- Do not allow pools of excess Prosfas to accumulate because they form a shiny anti-adhesive film
- To prevent the film from forming, sprinkle sand over the last coat of Prosfas and remove the excess sand when dry
- Proceed with levelling or installation of flooring after making sure the surface is dry
- Drying time varies with the amount of product used, and ambient temperature and humidity
- The recommended application temperature is from +5°C to +35°C
Cleaning:
- Hands, tools and surfaces in contact with Prosfas must be cleaned immediately with abundant water
- Once it hardens, removal is difficult and can only be done mechanically
Consumption:
- Surfaces of screeds can be repaired using 0.5 to 0.7kg/m² of Prosfas but very porous surfaces may require four to six times as much
- Test a small area, especially on very damaged surfaces
- Apply several coats to evaluate how much Prosfas is needed to consolidate the substrates
Storage and Safety Instructions
Storage:
- Prosfas is stable for at least 24 months when stored in a dry place in its original packaging
- Protect from frost
Safety Instructions:
- Prosfas may irritate the skin and breathing system
- Serious damage may be caused if it comes into contact with the eyes
- We recommend the use of suitable protective gloves and protection for the eyes and face
- If the product comes into contact with the eyes, rinse off well with plenty of clean water and seek specialist medical advice
- Hazard classification according to EC 1999/45: Irritant
- Refer to Safety Data Sheet (see 'Data Sheets' section above) before use
Data sheet
- Manufacturer
- Mapei
- For Use By
- Professional Use
- For Use On
- Cementitious Screeds
- Application Method
- Watering Can (sprinkler)
Pump
Broom
Brush
Roller - Single, Two or Three Pack
- Single
- Pack Size
- 25kg Drum
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 5°C
- Density
- 1.19g/cm³
- Solids by Volume
- 24%
- Shelf Life (from date of manufacture)
- 12 months
- Consumption
- See 'How to use' section above
- Drying time
- 24 hours
- pH
- 12
- Base Type
- Solvent-Free
- Suitable For Use On
- Cementitious Screeds
- Application Method
- Broom
- Application Method
- Pump
- Application Method
- Watering Can
- Application Method
- Brush
- Application Method
- Roller
- Manufacturer
- Mapei
- Product Usage Type
- Hardener
- Viscosity Brookfield (cP)
- 10 (mPa•s)
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Mapei Prosfas is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT