can you recommend a paint for an outside concrete patio

Assuming there is a Damp Proof Membrane under the concrete patio, it is clean, dry, sound and prepared as detailed in the technical data sheet, this could be used for external application to provide a UV resistant semi-gloss finish in your choice of 8 Ready Mixed Colours.

Can this be used on a concrete patio? Or outside for any use i.e. is it UV resistant?

Assuming there is a DPM under the concrete patio, it is clean, dry, sound and prepared as detailed in the technical data sheet this can be used for an external application, it is UV resistant.

Hi what paint do you recommend for decking it has to withstand wheelchair use and two small.dogs thanks

We have Teamac Deck Paint Smooth and T eamac Suregrip Deck Paint which would both be suited to this application. Details on preparation and application can be found in the product data sheets available to download from the 'Attachments' tab.

what paint do you recommend on concrete floor of toilet and shower room

We would recommend Smartkote Safekote which is a ready-to-use polyurethane coating that provides an attractive, abrasion resistant anti-slip surface. The fine texture is provided by small silica particles which will not hurt bare feet, making it ideal for showers, change rooms, ablution blocks and other surfaces in environments such as hospitals, hotels or children’s playgrounds. Non-porous cement should be acid etched prior to application and if the surface is weak, damp or oil contaminated then you should prime the concrete with Duram Duraprime .

Can you tell me what the slip rating of the 301 Ind Floor Paint is please? Thanks.

301 Industrial Floor Paint isn't sold as an anti-slip floor coating and as such has had no testing carried out. If you require a slip resistant floor paint we would instead recommend our 501 Anti Slip Floor Paint .

Hi, Can I use this product on moisture resistant chipboard flooring in my workshop? Rod

Yes that will be OK, apply 2 full coats.

Hi there, I have matt ceramic tiles in my kitchen and wondered if it could be painted over with your floor paint? Thanks!

No, we recommend Smartkote Protectakote Clear Primer Treatment followed by Smartkote Safekote for glazed tiles.

Hi, I have an exterior concrete play area (10m x 4.5) I would like to paint with a non slip finish. Which of your paints would you recommend? Many thanks

We would recommend Smartkote Protectakote UVR as this contains a rubber granulate to form the anti-slip finish in the product so will provide a less abrasive/coarse surface if children should fall. Please refer to the product information and data sheets for details of application including preparation/priming of concrete. Based on 45m² of surface area you would require 45 litres of Smartkote Protectakote UVR to apply the required 2 coats plus any primer, accelerator, etc. required.

The floor I intend to paint has been previously painted with a liquid dpm presumably bitumen based, would your paint take to the surface without extra screed

Our 301 Industrial Floor Paint can't be used over a bituminous based product but our 313 Acrylic Floor Paint should be fine. Test a small area before use to ensure adhesion, compatibility, etc.

Hi, I have a large area 150 square meter, mostly sheltered, but has a part where the sun shines on to it. can you tell me how much I require? The concrete is a bit rough may need need a screed! Would this product be suitable. Thanks Mr Harrison

To apply 2 coats to 150m² you would require 25 litres of 301 Industrial Floor Paint. If you require a screed to level any areas prior to painting we would recommend Rust-Oleum Speed Screed .

301 Industrial Floor Paint

Reference RAW301

Brand Rawlins Paints

Search ID RAW1094

A single pack, easy to use floor paint in 8 colours which dries to a semi-gloss finish.

For use on masonry, wood, cement, concrete and many other surfaces.
Easy to use, versatile and economical.
Touch dry in just 2 hours @ 20 °C.
No primer required for concrete (just dilute 1st coat with 10% white spirit).

Colour

Pick a Colour

Current colour: Light Grey

White
White
Black
Black
Blue
Blue
Light Grey
Light Grey
Flint Grey
Flint Grey
Forest Green
Forest Green
Tile Red
Tile Red
Yellow
Yellow

Size

Finish

£51.54(incl. VAT)

£42.95(ex. VAT)

Quantity

Please choose your colour

In Stock and Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

10 questions about the product

Description

301 Industrial Floor Paint is a single pack, easy to use floor paint which dries to a semi-gloss finish and is available in 8 colours. It is easy to use, versatile and economical. No primer is required for concrete (just dilute 1st coat with 10% white spirit). Other substrates require a suitable primer before application.

301 Industrial Floor Paint is ideal for use on masonry, wood, cement, concrete and many other surfaces.

Features & Benefits

Ready mixed
Semi-gloss finish
Available in 8 colours
For use on masonry, wood, cement, concrete and many other surfaces
Touch dry in just 2 hours @ 20 °C
No primer required for concrete (just dilute 1st coat with 10% white spirit)
Application by brush or roller

Typical Properties

Technical Data
	301 Industrial Floor Paint
Specific Gravity:	1.08 to 1.36 @ 20 °C
Volume Solids:	51-60%
Wet Film Thickness:	75 microns
Dry Film Thickness:	40 - 45 microns
Typical Viscosity:	3.5 Poise @ 25 °C
Flash Point:	Above 32°C (closed cup)
V.O.C.	391g/litre

Coverage

Expected spreading rate of 13-15m²/litre at 40 microns dry film thickness.
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants
Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint
This can be done mechanically by abrading or blasting, or chemically using Acid Etch
These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance
New concrete must be allowed to cure thoroughly which can take up to 3 months
Other surfaces must be prepared and primed with the suitable primer for that substrate
Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced
Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly

Mixing:

Mix well before use

Priming:

10% thinned 301 Industrial Floor paint on concrete
Suitable metal or wood primer

Application

As dictated by normal good painting practice
In confined spaces, provide adequate ventilation during application and drying

Cleaning

White Spirit

Curing

Drying Times
	301 Industrial Floor Paint
Touch Dry:	2 hours @ 20 °C
Hard Dry:	12 hours @ 20 °C
Full Hardness:	5-7 Days @ 20 °C
Minimum Overcoating Time:	16 hours/Overnight Dry

Low temperature and high humidity will adversely affect application, drying and performance of any coating.

Storage & Shelf Life

Store only in the original container
Keep container tightly closed and upright, in a cool, well ventilated place
See section 7.2 of the Safety Data Sheet for further information

Health & Safety

Please refer to Material Safety Data Sheet for information
301 Industrial Floor Paint shall be applied strictly in accordance with the manufacturer’s instructions

For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]

Product Details

Reference 1094-915419

Data sheet

For Use By: Consumer Use
Water / Solvent Based: Solvent
For Use On: Masonry, Wood, Concrete, Cement
Application Method: Brush, Roller
Sheen: Semi-Gloss
Colour: Standard / Ready Mixed
Single, Two or Three Pack: Single
Pack Size: 5L
Minimum Applied Thickness: 40 microns
Maximum Applied Thickness: 45 microns
Dry to Recoat (at 20°C): 16 hours/Overnight Dry
Fully Cured (at 20°C): 5-7 Days @ 20 °C
Coverage: 13-15m² per litre
Solids by Volume: 51-60%
VOC: 391g/litre
Touch Dry: 2 Hours
Recommended Dry Film Thickness: 40 - 45 microns
Recommended Wet Film Thickness: 75 microns
UN Number: UN1263
Specific Gravity: 1.08 to 1.36 @ 20 °C
Viscosity: 3.5 Poise @ 25 °C
Hard Dry: 12 hours @ 20 °C
Base Type: Solvent-Based
Suitable For Use On: Masonry
Suitable For Use On: Timber
Suitable For Use On: Concrete
Suitable For Use On: Wood
Suitable For Use On: Cement
Finish: Semi-Gloss
Application Method: Brush
Application Method: Roller
Components: 1K
Product Usage Type: Topcoat
Fastest Delivery: Next Working Day
Product Category: Paints
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Colour Family: Red
Colour Family: Yellow
Colour Family: Black
Colour Family: White
Product Type: Alkyd

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

mcdougall on 2024-08-11 08:48:16	Question: can you recommend a paint for an outside concrete patio
	Answer from Rawlins’ Technical Team: Assuming there is a Damp Proof Membrane under the concrete patio, it is clean, dry, sound and prepared as detailed in the technical data sheet, this could be used for external application to provide a UV resistant semi-gloss finish in your choice of 8 Ready Mixed Colours.

Devin Carter on 2021-06-28 22:56:15	Question: Can this be used on a concrete patio? Or outside for any use i.e. is it UV resistant?
	Answer from Rawlins’ Technical Team: Assuming there is a DPM under the concrete patio, it is clean, dry, sound and prepared as detailed in the technical data sheet this can be used for an external application, it is UV resistant.

Corina on 2019-08-06 04:11:48	Question: Hi what paint do you recommend for decking it has to withstand wheelchair use and two small.dogs thanks
	Answer from Rawlins’ Technical Team: We have Teamac Deck Paint Smooth and Teamac Suregrip Deck Paint which would both be suited to this application. Details on preparation and application can be found in the product data sheets available to download from the 'Attachments' tab.

nick Lane on 2019-04-10 12:59:24	Question: what paint do you recommend on concrete floor of toilet and shower room
	Answer from Rawlins’ Technical Team: We would recommend Smartkote Safekote which is a ready-to-use polyurethane coating that provides an attractive, abrasion resistant anti-slip surface. The fine texture is provided by small silica particles which will not hurt bare feet, making it ideal for showers, change rooms, ablution blocks and other surfaces in environments such as hospitals, hotels or children’s playgrounds. Non-porous cement should be acid etched prior to application and if the surface is weak, damp or oil contaminated then you should prime the concrete with Duram Duraprime.

Terri on 2019-03-12 11:31:44	Question: Can you tell me what the slip rating of the 301 Ind Floor Paint is please? Thanks.
	Answer from Rawlins’ Technical Team: 301 Industrial Floor Paint isn't sold as an anti-slip floor coating and as such has had no testing carried out. If you require a slip resistant floor paint we would instead recommend our 501 Anti Slip Floor Paint.

Rod on 2019-02-07 20:37:43	Question: Hi, Can I use this product on moisture resistant chipboard flooring in my workshop? Rod
	Answer from Rawlins’ Technical Team: Yes that will be OK, apply 2 full coats.

Diana on 2018-10-19 19:23:05	Question: Hi there, I have matt ceramic tiles in my kitchen and wondered if it could be painted over with your floor paint? Thanks!
	Answer from Rawlins’ Technical Team: No, we recommend Smartkote Protectakote Clear Primer Treatment followed by Smartkote Safekote for glazed tiles.

Matt on 2018-04-02 17:49:26	Question: Hi, I have an exterior concrete play area (10m x 4.5) I would like to paint with a non slip finish. Which of your paints would you recommend? Many thanks
	Answer from Rawlins’ Technical Team: We would recommend Smartkote Protectakote UVR as this contains a rubber granulate to form the anti-slip finish in the product so will provide a less abrasive/coarse surface if children should fall. Please refer to the product information and data sheets for details of application including preparation/priming of concrete. Based on 45m² of surface area you would require 45 litres of Smartkote Protectakote UVR to apply the required 2 coats plus any primer, accelerator, etc. required.

Herb Greener on 2017-02-01 11:50:30	Question: The floor I intend to paint has been previously painted with a liquid dpm presumably bitumen based, would your paint take to the surface without extra screed
	Answer from Rawlins’ Technical Team: Our 301 Industrial Floor Paint can't be used over a bituminous based product but our 313 Acrylic Floor Paint should be fine. Test a small area before use to ensure adhesion, compatibility, etc.

Jim Harrison on 2016-10-31 20:21:50	Question: Hi, I have a large area 150 square meter, mostly sheltered, but has a part where the sun shines on to it. can you tell me how much I require? The concrete is a bit rough may need need a screed! Would this product be suitable. Thanks Mr Harrison
	Answer from Rawlins’ Technical Team: To apply 2 coats to 150m² you would require 25 litres of 301 Industrial Floor Paint. If you require a screed to level any areas prior to painting we would recommend Rust-Oleum Speed Screed.

IMPORTANT SHIPPING & DELIVERY INFORMATION

301 Industrial Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Coo-Var Acid Etch

Acid etching solution designed to remove laitance and salts from concrete. For new concrete, power floated concrete floors, and exceptionally smooth surfaces. Non-flammable and water-soluble. Essential for ensuring proper adhesion of subsequent paint layers.

£24.73 (incl. VAT)

Shop now

In Stock and Available for Delivery

COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

Follow us on:

301 Industrial Floor Paint

301 Industrial Floor Paint

Quick Links - Click To Jump To Section:

Features & Benefits

Typical Properties

Coverage

Surface Preparation

Application

Cleaning

Curing

Storage & Shelf Life

Health & Safety

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Coo-Var Acid Etch