- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
100% silicone, extremely reflective roof coating for flat and low slope roofs or areas where ponding water may occur.
- One coat application.
- 20yr warranty.
- Extreme reflectivity - lowers cooling costs.
- Rain safe in 15 minutes.
- High solids, low odour.
- Many more advantages listed further below.
The high-performance, durable line of APOC silicone products extends the life of the roof and is ideal over BUR, mod-bit, concrete and metal roofing.
APOC Flat Roof Restoration Coating is formulated to deliver superior waterproofing protection across many types of roof surfaces, including EPDM rubber roofs. By forming a chemical bond to the roof surface, APOC 576 delivers exceptional adhesion and a permanent waterproof seal to almost any type of roof.
Quick Links - Click To Jump To Section:
Features & Benefits
- Ultra strong, high resilience against harsh weather conditions
- No seams, joints, or fastenders, eliminating penetrations and creaing a continuous membrane
- Reduces both energy and utility costs
- Extends roof life & saves on roof maintenance costs
- Fast, quiet and low odour - No shutdowns or business interruptions
- Pond-Proof Technology for standing water protection
- One coat application
- 20yr warranty
- Extreme reflectivity - lowers cooling costs
- Rain safe in 15 minutes
- Resists ponding water
- 100% silicone - permanent leak proof seal
- Single component
- High elongation – 315%
- Lower C02 and reduces energy costs
- Reduce urban heat island effect and reflect heat back to the atmosphere
- High solids – 97%
Suitable Substrates
- Aged/weathered felt
- Asphalt
- Aged/weathered EPDM
- Aged/weathered Thermoplastic Polyolefin (TPO)
- Most single ply membranes
- Steel
- Concrete
- Sprayed polyurethane foam
- Modified bitumen
- Built-up systems (BUR)
- Cap sheet
- Torch down
- Most existing roof coatings
- Plywood/OSB
- Hypalon (rubber)
- Aged PVC
Surface Preparation
All surfaces must be clean, dry, have proper drainage and free of surface rust, dust and any other foreign matter or debris. Rusty surfaces must be properly cleaned then primed. Mould or mildew stains must be cleaned with a compatible cleaner prior to application. Rinse thoroughly.
Pressure washing entire surface is recommended (use only a wide fan tip - do not allow stream to tear into roof surface). Be certain all surfaces are thoroughly rinsed and dry prior to applying coating.
For applications over asphalt roof surfaces, APOC 583 Primer or comparable product can be used as a base coat for stain blocking protection.
Repair all leaks and cracks before applying any coating. Make repairs with polyester reinforcing fabric or APOC Incredible Fleece-Top Tape and APOC 581 Silicone Roof Patch. Allow repair to cure according to product directions before application of roof coating.
Application
Mix well before applying. A power drill mixing tool is ideal.
Confirm all dew or moisture has completely dried from the roof before applying. Best applied on a clear, dry day with warming temps between 1°C and 48°C.
Use a quality, heavy duty 20mm nap paint roller or professional airless sprayer. APOC 576 can be applied in one coat to surfaces in good condition. Recoat rough or damaged areas as needed. Can also be applied with a brush for smaller-scale projects.
Rain safe in 15 minutes at 21°C & 50% relative humidity. Clean-up with VM&P naphtha, xylene or mineral spirits.
Precautions
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P307+P311/P304+P312 IF exposed or inhaled: Call a POISON CENTER or doctor/physician.
P363: Wash contaminated clothing before reuse.
Please refer to the safety data sheet for further safety information prior to use.
Data sheet
- Manufacturer
- APOC
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Aged/weathered felt
Asphalt
Aged/weathered EPDM
Aged/weathered Thermoplastic Polyolefin (TPO)
Most single ply membranes
Steel
Concrete
Sprayed polyurethane foam
Modified bitumen
Built-up systems (BUR) - For Use On
- Cap sheet
Torch down
Most existing roof coatings
Plywood/OSB
Hypalon (rubber)
Aged PVC - Single, Two or Three Pack
- Single
- Max. Application Temperature
- +48°C
- Min. Application Temperature
- +1°C
- Solids by Volume
- 97%
- Colour(s)
- Standard Colours
- Base Type
- Solvent Free
- Suitable For Use On
- Aged/weathered felt
- Suitable For Use On
- Thermoplastic
- Suitable For Use On
- Aged/weathered EPDM
- Suitable For Use On
- OSB
- Suitable For Use On
- Aged/Weathered Thermoplastic Polyolefin (TPO)
- Suitable For Use On
- Concrete Roofs
- Suitable For Use On
- Most Single Ply Membranes
- Suitable For Use On
- Asphalt Roofs
- Suitable For Use On
- Sprayed Polyurethane Foam
- Suitable For Use On
- WPC Decking
- Suitable For Use On
- Built-Up Systems (BUR)
- Suitable For Use On
- Single-Ply Membranes
- Suitable For Use On
- Most Existing Roof Coatings
- Suitable For Use On
- Cabinets
- Suitable For Use On
- Aged PVC
- Suitable For Use On
- Modified Bitumen
- Suitable For Use On
- BUR Built-up Roofs
- Suitable For Use On
- Hypalon
- Suitable For Use On
- Polyurethane Foam
- Suitable For Use On
- Steel Roof
- Suitable For Use On
- Concrete
- Suitable For Use On
- EPDM Rubber Roofs
- Suitable For Use On
- Steel
- Suitable For Use On
- Cap Sheet
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Torch Down
- Suitable For Use On
- Metal Roofs
- Suitable For Use On
- WPB Plywood
- Suitable For Use On
- Plywood
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- APOC
- Usages
- Solar Reflective
- Product Usage Type
- Topcoat
- Colour Family
- Grey
- Colour Family
- White
- Categorised As
- Roof Paints > Low Temperature Roof Paints
- Seasonal
- Cold Weather
- Roof Type
- Flat & Pitched
Questions
Question about the product
Stokes joinery on 2024-03-24 10:05:54 | Question:
Hi, what is the coverage M2/L of the Apoc 576 silicone coating? I couldn't find any reference to it. Thanks Rob |
Answer from Rawlins’ Technical Team:
The coverage rate is 1.7m² per litre. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
APOC 576 Premium Silicone Roof Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
APOC 583 Armor Base Silicone Primer
APOC 583 is a high performance water-based primer formulated to create a smooth, fully adhered substrate prior to the application of APOC silicone coatings. Helps prevent bleedtrough over asphalt substrates Promotes adhesion Seals cracks Improves long-term performance and durability More Information Delivery Info
APOC 581 Silicone Roof Patch
APOC 581 Silicone Roof patch is a premium, highly flexible and durable repair product for use with silicone coatings. Can be applied in a wide temperature range Not recommended for use with acrylic, aluminium or asphalt coatings Exceeds performance requirements of ASTM C920 More Information Delivery Info
APOC Heavy Duty All-Purpose Incredible Tape
APOC Fleece-Top Heavy Duty All-Purpose Incredible Tape is a versatile, heavy-duty, easy-to-use leak repair, reinforcement and construction tape for residential, commercial and industrial applications that forms a tough and durable repair with a lifetime of dependability. Immediately seals materials, stopping air, moisture and water...