- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Resin bonded system - gives a `stone carpet` finish which gives the appearance of loose aggregate, but avoids maintenance problems. Primarily used on outdoor walkways and concourse areas but can also be used internally to reflect the natural beauty of the outdoors.
- Tough and hard wearing, flexible.
- Excellent abrasion and impact resistance.
- Good chemical resistance.
- Seamless and easy to clean.
- Permeable (breathable), slip resistant.
Important!
- Images are for illustrative purposes only and may differ from the actual product.
- This product is for Professional Use Only.
Description
506 Anti Slip Dressing is a seamless bonded aggregate system with high wear and slip resistance. Each pack comprises a flexible binder suitable for bonding the loose Quartz or Stone decorative aggregates to concrete, tarmac and asphalt and sufficient aggregate. The system can be finished with a clear sealer if required to enhance the decorative effect, and to obviate staining – this is an optional extra and must be purchased separately.
506 Anti Slip Dressing gives a 'stone carpet' finish which gives the appearance of loose aggregate but avoids maintenance problems. 506 Anti Slip Dressing is primarily used on outdoor walkways and concourse areas but can also be used internally to reflect the natural beauty of the outdoors.
506 Anti Slip Dressing is suited to areas subject to heavy footfall and vehicular traffic such as leisure complexes, theme parks, holiday resorts, national trust sites, car parks and much more.
This product is for Professional Use Only.
Recommended Uses:
- As a decorative anti-slip floor covering for internal and external walkways and concourse areas
- Suitable for use on concrete, tarmac and asphalt
- Used at parks, shops, restaurants, sports venues, leisure complexes, theme parks, holiday resorts, national trust sites, car parks and much more
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Coverage
- Surface Preparation
- Application
- Cleaning
- Curing
- Limitations
- Storage & Shelf Life
- Health & Safety
Features & Benefits
- Coverage 10m² per pack
- High wear and slip resistance
- Gives the appearance of loose aggregate, but avoids maintenance problems
- Three-pack
- Internal and external use
- Tough and hard wearing
- Flexible
- Excellent abrasion and impact resistance
- Good chemical resistance
- Low odour during application
- Seamless
- Easy to clean
- Permeable (breathable)
- Other Stone or Quartz colours available – minimum quantities and lead times apply - contact us for more information on 0113 2455450 (option 2) or send a message to [email protected]
Typical Properties
| Technical Data | |
|---|---|
| 506 Anti Slip Dressing | |
| Viscosity: | 1,600-2,000 cps @ 20°C |
| Pot life @ 20°C: | 20-30 Minutes |
| Adhesion to concrete: | 4.0MPa (concrete failure) |
| Hard dry time: | 4 hours @ 20°C |
| Chemical Resistance | |
|---|---|
| Chemical | Resistance |
| Dilute Acids and Alkalis | Excellent |
| Engine Oil | Excellent |
| Petrol | Excellent |
| Diesel | Excellent |
| Water | Excellent |
| Anti-Freeze | Excellent |
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Coverage
- A 10m² pack has sufficient Binder and Aggregate to treat up to 10m² of correctly prepared surface providing an approximate system thickness of 3 – 4mm
Surface Preparation
Concrete:
- Concrete surfaces shall be sound, clean, and free from standing water, laitance oil, grease and other contaminants
- Grinding or grit blasting are suitable mechanical means of removing laitance and contaminants and providing a profiled substrate
Tarmac:
- New tarmac must be allowed to weather until all residual oils have been oxidised or been removed.
- Thoroughly wash to remove contaminants and allow to dry
Asphalt:
- Wash thoroughly to remove all contaminants and allow to dry
Priming:
- Priming is not usually required
Mixing (Binder):
- Mix equal volumes of base and curing agent
- Thoroughly mix by slow speed mechanical stirrer (drill plus paddle attachment) until a uniform consistency has been achieved
Mixing Ratio:
- By Volume - 1 Base : 1 Curing Agent
- By Weight - 100 Base : 100 Curing Agent
Application
- Apply the mixed binder resin by roller, serrated trowel, or squeegee at a nominal rate of 0.5-3mm (the application rate will depend on the size of aggregate to be broadcast)
- Whilst the binder resin remains wet, broadcast the selected aggregate to achieve a full 'blinding' i.e. leave no resin visible
- The following day thoroughly sweep off any excess aggregate using a stiff bristled broom
Cleaning
- Clean equipment with 109 Tool Cleaner prior to curing of the coating
Curing
- Allow the finished system to cure for a minimum of 24 hours @ 20°C prior to foot traffic, and 48 hours @ 20°C prior to vehicular traffic
Limitations
- Do not apply to wet or uncured concrete surfaces
- Do not apply at temperatures of 3°C or less
- Do not apply to new, un-weathered tarmac or asphalt surfaces
Storage & Shelf Life
- Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C
- Do not expose to freezing conditions
- 506 Anti Slip Dressing has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions
Health & Safety
- Avoid contact of the material with skin and eyes
- Wear gloves and goggles
- Wash off splashes immediately with soap and water
- Any eye contamination must be rapidly irrigated with copious amounts of clean water, and immediate medical attention sought
- Please refer to Material Safety Data Sheet for additional information
- 506 Anti Slip Dressing shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Product Details
1106-61619
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Concrete, Tarmac, Asphalt
- Application Method
- Roller, Squeegee, Trowel
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Three-Pack
- Pack Size
- 10m²
- Pot Life (at 20°C)
- 20-30mins
- Coverage
- 10m² per pack
- Touch Dry
- 24 Hours
- UN Number
- UN3082
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete Walkways
- Suitable For Use On
- Holiday Resorts
- Suitable For Use On
- Outdoor Walkways
- Suitable For Use On
- Naiontal Trust Sites
- Suitable For Use On
- Outdoor Concourses
- Suitable For Use On
- Car Parks
- Suitable For Use On
- Tarmac Walkways
- Suitable For Use On
- Asphalt Walkways
- Suitable For Use On
- Concrete Paths
- Suitable For Use On
- Tarmac Paths
- Suitable For Use On
- Asphalt Paths
- Suitable For Use On
- Concourses
- Suitable For Use On
- Tarmac Concourses
- Suitable For Use On
- Concrete Concourses
- Suitable For Use On
- Asphalt Concourses
- Suitable For Use On
- Concrete
- Suitable For Use On
- Tarmac
- Suitable For Use On
- Heavy Footfall
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Heavy Traffic Areas
- Suitable For Use On
- Paths
- Suitable For Use On
- Leisure Complexes
- Suitable For Use On
- Walkways
- Suitable For Use On
- Theme Parks
- Application Method
- Roller
- Application Method
- Trowel
- Application Method
- Squeegee
- Components
- 3K
- Usages
- Anti-Slip
- Product Usage Type
- Aggregate
- Product Usage Type
- Resin Bonded
- Product Category
- Paints
- Colour Family
- Orange
Questions
Question about the product
Tony
on
2023-01-22 12:02:30
| Question:
Can this be used on a concrete ramp/slope for a driveway entrance |
Answer from Rawlins’ Technical Team:
Assuming the concrete driveway is clean, dry, sound and prepared as detailed in the technical data sheet this product could be used. Please note this product is for professional use only. | |
|
Eleanor Gilbert
on
2021-08-11 13:34:17
| Question:
We have a concrete yard which for drainage purposes has some very gently sloping areas. Our dogs use the yard. Is the coating very rough and scratchy? Does the product give off harmful emissions in hot weather, for example? In order to clean where our dogs use the yard for business we use hot water and sometimes bleach on tough dirty spots. Does the product withstand hot water and bleach? If not, what other cleaning methods could be used? |
Answer from Rawlins’ Technical Team:
This product provides an anti-slip surface but is not very rough, it has the appearance of a loose aggregate. This is a low odour product during application and will not produxce odours once cured. It also has good chemical resistance. | |
|
Jill
on
2019-11-25 13:08:27
| Question:
Will this product level out minor rippling on a concrete surface and cover construction joints in the site cast concrete ground? |
Answer from Rawlins’ Technical Team:
506 Anti Slip Dressing is a thick system so it should mask minor finishing marks in concrete. Covering construction joints shouldn’t be a problem either as the material has a good amount of flexibility. That being said, if there is considerable movement along the joints this may cause cracks to appear in the surface. | |
|
Ian
on
2019-09-06 11:48:39
| Question:
What thickness is recommended ? |
Answer from Rawlins’ Technical Team:
10m² packs include 15kg of binder resin with hardener which must not be spread further than 10m² and 50kg of 1-3mm Chinese Bauxite Aggregate to broadcast over the wet resin. | |
|
claire yakoob
on
2019-06-01 10:00:01
| Question:
Can this product be used to cover vertical and horizontal steps? |
Answer from Rawlins’ Technical Team:
This product is not suitable for vertical surfaces, only level, horizontal ones. | |
|
John Ridley
on
2019-05-08 10:05:03
| Question:
506 Anti Slip Dressing What's it made of? How do you stick it onto the tarmac? Can it be cut easily? How long do you expect to last? Many thanks John |
Answer from Rawlins’ Technical Team:
506 Anti-Slip Dressing is a seamless bonded aggregate system with high wear and slip resistance. Each pack comprises a flexible binder suitable for bonding the loose Quartz or Stone decorative aggregates to concrete, tarmac/asphalt and sufficient aggregate. New tarmac must be allowed to weather until all residual oils have been oxidized or been removed. Thoroughly wash to remove contaminants and allow to dry. Apply the mixed Binder Resin by roller, serrated trowel, or squeegee at the required spreading rate. Whilst the Binder Resin remains wet, broadcast the selected aggregate to achieve a full 'blinding' i.e. leave no resin visible. The following day thoroughly sweep off any excess aggregate using a stiff bristled broom. | |
|
Bryn Davies
on
2017-11-23 12:34:14
| Question:
Please can you provide me with the 'R' Rating value for this product
Thanks
Bryn |
Answer from Rawlins’ Technical Team:
The product hasn't been tested to determine its R value as we do not offer the product for any thermal conductivity or insulating properties. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
506 Anti Slip Dressing is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
