- Reduced price
- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Coach Enamel is traditional, ultra high quality, high build, long oil synthetic enamel for brush application. It gives an extra long wet edge time allowing it to be brushed without brush drag.
- High gloss
- Excellent water resistance
- Flexible with good exterior durability and toughness
- Available in 3,500 colours from RAL, NCS, and British Standard
- Also available as an aerosol, please see HMG Coach Enamel Aerosol
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Description
HMG Coach Enamel is a traditional, ultra high quality, high build, long oil synthetic enamel for brush application. It gives an extra long wet edge time allowing it to be brushed without brush drag.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- High gloss
- Excellent water resistance
- Flexible with good exterior durability and toughness
- Available in 3,500 colours from RAL, NCS, and British Standard
Product Specification
| Technical Data | |
|---|---|
| Volume Solids: | 58.8% |
| VOC Content: | 0.380kgs/ltr |
| SG: | - |
| Viscosity: | 250 mPas |
| Density: | 1.055 g/cm³ |
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life: | 12 months from delivery date in original sealed containers. |
| Flash Point: | - 42°C |
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Brush: | 50 µm | 100 µm | |
Coverage: 10 square metres per litre @ 50 microns dft.
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 3 hours |
| Dry To Handle: | 12 hours |
| Dry To Recoat: | After 24 hours |
| Fully Cured: | 24 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| Brush | |||||
| Mixing Ratio: | Thinner: Up to 10% | ||||
| - | |||||
| Thinner Options: | Thinner 2611 | ||||
| Thinner 2612 | |||||
| Viscosity: | 250 mPas | ||||
| Number Of Coats (Guide Only): | 1 - 2 coats | ||||
| Flash Off: | - | ||||
For futher information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or
Product Notes
| Information on basic physical and chemical properties | |
|---|---|
| Form: | Liquid |
| Colour: | According to product specification. |
| Odour: | Characteristic |
| Odour Threshold: | Not determined |
| pH-value: | Not determined |
| Change in Condition | |
| Melting point/freezing point: | Undetermined |
| Initial boiling point and boiling range: | 135°C |
| Flash Point: | 30°C |
| Flammability (solid, gas): | Not applicable |
| Ignition temperature: | 200°C |
| Decomposition temperature: | Not determined. |
| Auto-ignition temperature: | Product is not selfigniting |
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
| Explosion limits: Lower: | 0.6 Vol % |
| Explosion limits: Upper: | 7 Vol % |
| Vapour pressure at 20°C: | 2 hPa |
| Density at 20°C: | 1.062 g/cm³ |
| Relative density: | Not determind |
| Vapour density: | Not determind |
| Evaporation rate: | Not determind |
| Solubility in / Miscibility with water: | NOT MISCIBLE |
| Partition coefficient: n-octanol/water: | Not determined |
| Viscosity: Dynamic at 20°C: | 250 mPas |
| Viscosity: Kinematic: | Not determined |
| Solvent content: Organic solvents: | 40.9% |
| Solids content: | 58.8% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
- Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked with water and disposed of in a noncombustible container with a tight fitting lid.
Product Details
RP-003-128
Data sheet
- Manufacturer
- HMG Paints Limited
- Water / Solvent Based
- Solvent
- For Use On
- Metal
- Application Method
- Brush
- Sheen
- Matt
Satin
Gloss - Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
2.5L
5L - Key Features
- High gloss. Excellent water resistance. Flexible with good exterior durability and toughness.
- Touch Dry (at 20°C)
- 3 Hours
- Dry to Handle (at 20°C)
- 12 Hours
- Dry to Recoat (at 20°C)
- After 24 Hours
- Fully Cured (at 20°C)
- 24 Hours
- Coverage
- 10 square metres per litre @ 50 microns dft (Theoretical)
- Recommended Thinner/Cleaner
- Thinner 2611/2612
- Density
- 1.055 g/cm³
- Solids by Volume
- 58.8 %
- Heat Resistance (up-to)
- 90°C
- VOC
- 0.380kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers
- Recommended Dry Film Thickness
- 50 µm
- Recommended Wet Film Thickness
- 100 µm
- UN Number
- UN1263
- Base Type
- Enamel
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Application Method
- Brush
- Product Usage Type
- Topcoat
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- Clear
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
CLEARANCE - HMG Coach Enamel - RAL 7046 Telegrey Gloss 1L is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
HMG Thinner 2611
HMG Thinner 2611 is a medium thinner. For use with compatible HMG systems.
Price
£13.45
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2612
HMG Thinner 2612 is a slow thinner. For use with compatible HMG systems.
Price
£14.09
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery