Sherwin-Williams Pyroplast Wood P

Brand Sherwin-Williams

Search ID SHE11161

Single component, water-based fire protective coating system for use on most interior soft and hardwoods, including plywood, chipboard, fibre insulation board, hardboard and veneering. Can be overcoated with Pyroplast Top WB to colour.

Formerly known as Sika Pyroplast Wood P
For Professional Use Only
Independently fire tested and approved to European classification: EN 13501-1 (ref: K-3067/776/14-2)
Simple to apply, halogen-free. Pyroplast Wood P reduces the ignitability of soft and hardwood ≥ 10 mm thickness, as well as other timber derivatives e.g. plywood, chipboard, fibre insulation board, hardboard, and also on veneering ≥ 13 mm thickness.
Delays the inflammation of natural wood and wood derivates

Colour

White

Size

Finish

£596.36(incl. VAT)

£496.97(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

No queries yet, leave the first!

Description

Sherwin-Williams Pyroplast Wood P is an ecological water-based fire protection coating for interior use which forms a carbon char under the effect of heat.

The product is tested to provide spread-of-flame protection and delays the inflammation of natural wood and wood derivates. Pyroplast Wood P emphasizes the interior design of timber structures and provides an attractive option to architects, builders and end-users.

Quick Links - Click To Jump To Section:

Features & Benefits
Product Information
System Information
Application Information
Ecology, Health & Safety
Application Instructions

Features & Benefits

Ecological water-based coating system
VOC Pyroplast Wood P: < 1 g/l
VOC Pyroplast Top WB: < 48 g/l
Free of halogens and aromatic solvents
Low material consumption
Simple application
No additional statical load of coating
Individual coloration possible with a topcoat of Pyroplast Top WB
Insulates against heat, checks fire, prevents propagation of fire and spread of flame and diminishes fluegas temperatures.

Product Information

Packaging	Pyroplast Wood P Primer: 5 kg net. Pyroplast Wood P: 25 kg and 5 kg net. Pyroplast Top WB: 11 kg and 3L net.
Appearance & colour	White
Shelf life	18 months
Storage conditions	Store in originally sealed containers in a cool and dry environment. Protect against frost!
Density	Pyroplast Wood P Primer: ~1.29 g/cm³ Pyroplast Wood P: ~1.29 g/cm³ Pyroplast Top WB: ~1.26 g/cm³
Flash point	N/A
Solid content	Pyroplast Wood P Primer: ~52 % by weight Pyroplast Wood P: ~65 % by weight Pyroplast Top WB: ~52 % by weight

System Information

Tie coat (depending on wood surface): Pyroplast Wood P Primer
Intumescent coating: Pyroplast Wood P
Topcoat (optional): Pyroplast Top WB

Application Information

Consumption	1 × 120 g/m² Pyroplast Wood P Primer (depending on wood surface) 1 × ≥ 350 g/m² Pyroplast Wood P 1 x 120 g/m² Sika Pyroplast Top WB (optional) Consumption rates are based on fire performance according EN 13501-1 B EN 13823 FIGRA ≤ 120 W/s und LFS < edge of specimen and THR600s ≤ 7,5 MJ and EN ISO 11925-2 Exposure = 30 s Fs < 150 mm within 60 s s1 SMOGRA ≤ 30 m2 / s2 and TSP600s ≤ 50 m2 d0 No flaming droplets/ particles in EN 13823 within 600 s (As entire coating system. If no Topcoat is applied, classification Bs2d0 is met!) If consumption rates for alternative standards are requested, please consult the Technical Department at 0113 2455450.
Relative air humidity	Max. 80 %, application temperature shall be at least ≥ 3 K above dew point. During application and drying of the total Pyroplast Wood coating system including Pyroplast Top WB, as well as transportation, special protection measures must be taken against weathering.
Substrate temperature	Object temperature not below + 10°C, to max. + 40°C* * If higher temperatures occur, please consult the Technical department for further assistance.
Substrate moisture content	At high moisture content of the timber (> 15%), the coating is unlikely to dry satisfactorily and blooming may result. Therefore the moisture content of the timber should be, as near as possible to the level it will stabilise at in use.
Waiting time to overcoating	Pyroplast Wood P requires a minimum of 24 h drying prior to application with itself. Overcoatable with topcoat Pyroplast Top WB after approx. 48 hours. A complete drying of the fire protection coating prior topcoat application is highly recommended. Through-drying of Pyroplast Wood P can be checked by a ‘finger-nail test’. Prior to further applications possible contaminations must be removed.
Drying time	At approx. + 20°C temperature and 60 % relative humidity: Touch dry after ~6 h Overcoating after ~24 h with itself Overcoating after ~48 h with Pyroplast Top WB Different temperatures, different relative humidity and different fire protection coating thickness have an influence on drying time

Ecology, Health & Safety

User must read the most recent corresponding Safety Data Sheets (SDS) before using any products. The SDS provides information and advice on the safe handling, storage and disposal of chemical products and contains physical, ecological, toxicological and other safety-related data.

Application Instructions

Pre-Treatment:

Substrate must be dry, free from dust, oil, wax, grease, dirt, resin, etc.; Existing coatings with poor adhesion have to be completely removed, e.g. with solvent-based paint stripper or to be sanded down. Surfaces that have been treated with non-acid resistant coatings or release agents such as emulsion paints containing lime, chalk or lithopone should be sanded down completely.

Timber substrates with wetting difficulties should be roughened thoroughly with abrasive paper. The moisture content of the timber should be below 15 %.

If resistance to wet rot, fungi or insect attack is requested, the manufacturer recommends using commercial preservative agents based on oil-alkyd resins provided they are compatible with the Pyroplast fire protection system.

Apply Pyroplast fire protection coating system only after the preservative treatment is completely dry. The moisture content of the timber should be below 15 %. Sika Pyroplast Wood P Primer may be used to allow sufficient adhesion or avoid diffusion of wood ingredients on resinous wood.

Mixing:

Stir thoroughly prior to application, ensuring the product is free of lumps.

Application:

The method of application has a major effect on achieving uniform thickness and appearance. Spray application will give the best results. The indicated dry film thickness is easily achieved by airless spray. In case of application by roller or brush, additional layers may become necessary to achieve the required coating thickness, depending on type of construction, site conditions, colour shade etc. Prior to application a trial on site may be useful to ensure that the selected ap- plication method will provide the requested results.

Brushing & Rolling:

Material shall be applied in supply viscosity
Load natural fine bristle brushes or short pile lambswool rollers are recommended
Application of two coats of Pyroplast Wood P to a load of 175g/m² each coat is recommended

Airless Spraying:

Material shall be applied undiluted
Airless spray equipment with pressure ratio ≥ 30 : 1
Filters should be removed
Hose diameter not below ⅜ "
Whip line 1.5 - 2 m, NW 6, may be used
Recommended nozzle sizes:
- Pyroplast Wood P Primer: 0.27 - 0.34 mm (0.011 - 0.017 inch)
- Pyroplast Wood P: 0.34 - 0.64 mm (0.017 - 0.025 inch)
- Pyroplast Top WB: 0.27 - 0.56 mm (0.011 - 0.023 inch)
Hoses must be used for water-based products only

Above data shall be used as a guideline with variations being made to suit local conditions. Immediately clean equipment after use with water.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Product Details

Reference 11161-1016709

Data sheet

Manufacturer: Sherwin-Williams
For Use By: Professional Use
Interior / Exterior Use: Interior Use
For Use On: Wood
Plywood
Chipboard
Hardwood
Fibre Insulation Board
Veneer
Application Method: Brush
Roller
Airless Spray
Single, Two or Three Pack: Single
Touch Dry (at 20°C): ~6 hours
Dry to Recoat (at 20°C): ~24 hours
Max. Application Temperature: +40°C
Min. Application Temperature: +10°C
Density: ~1.29 g/cm³
Dry for Topcoat (at +20°C): ~48 hours
Consumption: ≥ 350 g/m²
Base Type: Water-Based
Suitable For Use On: Veneer
Suitable For Use On: Fibre Insulation Board
Suitable For Use On: Wood
Suitable For Use On: Plywood
Suitable For Use On: Hardwood
Suitable For Use On: Chipboard
Finish: Matt
Application Method: Brush
Application Method: Roller
Application Method: Airless Spray
Manufacturer: Sherwin-Williams
Components: 1K
Usages: Fire Resistance
Product Usage Type: Midcoat
Product Range: Pyroplast
Colour Family: White

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Sherwin-Williams Pyroplast Wood P is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Sherwin-Williams Pyroplast Top WB

A single component water-based topcoat in 345+ colours for fire protection coatings on wood, specially designed for Pyroplast intumescent fire protection systems against humidity and mechanical strain. Pyroplast Top WB has no impact on the foaming reaction of intumescent coatings. Formerly known as Sika Pyroplast Top W May only be used by...

£360.46 (incl. VAT)

Shop now

In Stock and Available for Delivery