- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
PU adhesive paste for wood which cures rapidly to form an exceptionally strong water resistant bond. It is ideal for use in all types of joinery, construction and repair applications where a permanent bond is required.
- Waterproof adhesive suitable for external use - meets the requirements of EN 204 (D4)
- Forms an exceptionally high bond strength to most building materials, even damp substrates
- Rapid curing formulation bonds in as little as 5 minutes
- Gap filling action achieves a high strength bond with irregular or uneven substrates
- Rapid curing and outstanding bond strength without the need for priming or surface treatment
Illbruck PU230 Rapid Adhesive is a thixotropic polyurethane paste adhesive. Applications include: fixing and bonding of windows, doors, staircases architrave’s, boat building, fixing of carpet grippers to concrete and wooden floors, etc. The adhesive is highly water-resistant and can be used in applications where regular wetting and/or high humidity is anticipated.
Illbruck PU230 Rapid Adhesive cures rapidly to form an exceptionally strong water resistant bond. It is ideal for use in all types of joinery, construction and repair applications where a permanent bond is required.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Coverage
- Surface Preparation
- Application
- Cleaning
- Curing
- Storage & Shelf Life
- Health & Safety
Features & Benefits
- Highly water-resistant
- Suitable for external use - meets the requirements of EN 204 (D4)
- Forms an exceptionally high bond strength to most building materials, even damp substrates
- Rapid curing formulation bonds in as little as 5 minutes
- Gap filling action achieves a high strength bond with irregular or uneven substrates
- Rapid curing and outstanding bond strength without the need for priming or surface treatment
Typical Properties
Technical Data | |
---|---|
Illbruck PU230 Rapid Adhesive | |
Composition: | Thixotropic Polyurethane Paste |
Conformance: | EN204:D4 |
Specific Gravity: | 1.08 |
Viscosity @ 20°C: | 100,000 cps |
Open Time: | 6-7 minutes |
Application Temperature: | 5°C to 40°C |
Service Temperature: | -50°C to 120°C |
Coverage
- 250-400ml per m² depending on the substrate
Surface Preparation
- Always carry out a test to confirm compatibility prior to use
- All surfaces to be bonded must be close fitting, degreased, clean and free from dust and any other contamination
- Dampening the surfaces to be bonded with a moist cloth or spray can increase the rate of cure
- Roughen the non-porous surfaces
Application
- Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling and use of this product.
- For full recommendation please refer to the Safety Data Sheet
- Cut off the end of the thread with a sharp knife, avoiding damage to the thread
- Trim the nozzle to the required diameter
- Ensure good contact between the joint surfaces before applying adhesive
- Apply the adhesive to one or both surfaces and spread quickly using a notched spreader
- Bring the two components together within 2 minutes and clamp securely together for at least 30 minutes until sufficient bond strength has developed
- Sufficient working strength will normally develop after 30 minutes
Cleaning
- Remove excess adhesive immediately
- Cured adhesive can only be removed mechanically
Curing
Drying Times | |
---|---|
Illbruck PU230 Rapid Adhesive | |
Touch Dry: | 5 Mins @ 20 °C |
Hard Dry: | 30-40 mins @ 20 °C |
Storage & Shelf Life
- Store in dry shaded conditions between 5°C and 25°C
- Shelf life of 9 months when stored as recommended in original unopened packaging
Health & Safety
- Please refer to Material Safety Data Sheet for information
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Wood, Concrete
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Product Certifications
- EN204:D4
- Pack Size
- 310ml
- Coverage
- 250-400ml per m² depending on the substrate
- Max. Application Temperature
- 40°C
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 9 months
- Touch Dry
- From 5 mins @ 20 °C
- UN Number
- N/A
- Specific Gravity
- 1.08
- Viscosity
- 100,000 cps
- Hard Dry
- 30-40 mins @ 20 °C
- Suitable For Use On
- Doors
- Suitable For Use On
- Windows
- Suitable For Use On
- Timber Floors
- Suitable For Use On
- Wooden Floors
- Suitable For Use On
- Concrete Floors
- Application Method
- Application Gun
- Components
- 1K
- Usages
- Anti-Slip
- Product Usage Type
- Adhesive
- Product Category
- Anti-Slip GRP
- Colour Family
- Clear
- Categorised As
- Anti-Slip > Fixings
- Seasonal
- Cold Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Illbruck PU230 Rapid Adhesive is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT