- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Used to prepare a variety of substrates including concrete, metal and masonry. It significantly improves the bond of the applied membrane.
- Designed to prepare surfaces prior to the applications of Visqueen self adhesive membranes and Visqueen TorchOn Tanking Membrane
- No mixing required - use straight from the tin
- Rapid cure - quick and easy to install in one coat application
Visqueen HP (High Performance) Tanking Primer is a black elastomeric bituminous priming solution. The product is supplied in a 5 litre tin.
Quick Links - Click To Jump To Section:
Approvals and Standards
- BBA Certified with Visqueen Self Adhesive Membrane, Visqueen Gas Resistant Self Adhesive Membrane and Visqueen TorchOn Tanking Membrane
- Quality Management System ISO 9001:2015
Storage and Handling
Store in an upright position, under cover and away from frost. Keep only in original container, in a cool, well ventilated space, away from heat sources. Keep the container closed when not in use.
Preparation
Inspect concrete surfaces for honeycombed areas and holes, if required bag-rub any irregularities or fill the surface with a suitable filler such as 3:1 mortar mix. All surfaces should be frost free, dry, smooth, clean, and free from oils, grease, condensation and other contamination. Remove areas of laitance.
Concrete substrates must be cured for a minimum 7 days prior to primer application.
Installation
Visqueen HP Tanking Primer can be applied directly from the tin using a brush, or transferred to another suitable container and then applied by roller. Do not pour directly onto the surface.
Apply 1 coat of Visqueen HP Tanking Primer at a coverage of 6/8m² per litre depending on the porosity of the surface. The primer will dry in 2-8 hours depending upon temperature and the primer should be covered by the membrane within 24 hours.
Usable Temperature Range
It is recommended that Visqueen HP Tanking Primer is used above 5ºC.
Data sheet
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete
Metal
Masonry - Single, Two or Three Pack
- Single
- Pack Size
- 12.5L
- Min. Application Temperature
- 5°C
- UN Number
- UN1263
- Base Type
- Bituminous based
- Suitable For Use On
- Masonry
- Suitable For Use On
- Metal
- Suitable For Use On
- Concrete
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Damp Proofing System
- Product Usage Type
- Tanking Primer
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Visqueen High Performance Tanking Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT