- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Used to protect construction membranes such as DPMs, gas membranes or substructure tanking membranes from damage from backfill, positioning of reinforced concrete, following trades, etc. The board can be used in both horizontal and vertical applications. In vertical applications, the board must be adequately held in position until fully supported e.g. with backfill.
- High impact strength - protects construction membranes from damage in heavy duty applications
- Embossed - anti-slip surface
- Heavy duty - protection against rebars, wind uplift and following trades
Visqueen Treadguard 1500 is a heavy duty HDPE semi-ridged protection board with an embossed upper surface.
The board is 1m x 2m, nominally 1.5mm thick and has Visqueen Treadguard 1500 printed on the upper (embossed) surface for ease of identification.
Quick Links - Click To Jump To Section:
Approvals and Standards
- Third party accreditation - BBA certified as a system component
- Quality Management System ISO 9001:2015
- Occupational Health and Safety System ISO 45001:2018
- Environmental Management System ISO 14001:2015
Storage and Handling
Visqueen Treadguard 1500 should be stored horizontally, under cover in its original packaging. The boards should not be exposed to long periods of ultraviolet light.
Care should be taken when handling the product in line with current manual handling regulations.
Preparation
Ensure the substrate is free from contamination, aggregate or sharp protrusions prior to positioning the board.
Installation
Apply Visqueen Treadguard 1500 boards above the laid construction membrane and butt joint together. Joints can be taped with Visqueen Pro Single Sided Jointing Tape applied equidistant over the junction. Apply pressure to the tape to ensure adhesion.
Usable Temperature Range
The system is recommended to be used above 5°C.
Data sheet
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Damp Proof Membranes
Gas Membranes
Substructure Tanking Membranes - Pack Size
- 1m x 2m, nominally 1.5mm thick
- Min. Application Temperature
- 5°C
- Suitable For Use On
- Substructure Tanking Membranes
- Suitable For Use On
- Damp Proof Membranes
- Suitable For Use On
- Gas Membranes
- Usages
- Anti-Slip
- Product Usage Type
- Protection Board
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Visqueen Treadguard 1500 Protection Board is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT