- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Used to bond Visqueen IGW5 Waterstop, Visqueen IGW10 Waterstop and Visqueen VX25 Waterstop to horizontal and vertical construction joints and day-joints in poured in-situ above or below ground concrete structures of at least 250mm width e.g. retaining walls.
- Cartridge format - convenient and easy to apply
- High performance - provides excellent initial grab to substrate
- Superior grade polymer - swellable watertight formulation
- No primer required - speeds up installation
- Installer friendly - allows for initial minor adjustment in waterstop positioning
- Versatile - suitable for both horizontal and vertical waterstop applications
Visqueen Waterstop Adhesive is a swellable high performance, one component, off-white polyurethane adhesive supplied in 310ml cartridges. When applied as a 10mm bead, the contents of one cartridge is sufficient to bond between 8 - 10 linear metres of Visqueen waterstop.
Quick Links - Click To Jump To Section:
Approvals and Standards
- Quality Management System ISO 9001:2015
Storage and Handling
Store Visqueen Waterstop Adhesive between 5°C and 25°C in a clean, dry environment in its original packaging.
In its original unopened cartridge, the adhesive has a 12 months shelf life from production date.
Care should be taken when handling the product in line with current manual handling regulations.
Preparation
Ensure the substrate is stable, free from contamination e.g. oil and fat, and free from loose material e.g. dust or sand. Ensure the substrate is not water logged, however a damp substrate can be tolerated.
Application to particularly rough surfaces should be avoided. Freshly placed concrete can be smoothed with a wooden batten to form a shallow rebate along which Visqueen Waterstop Adhesive can be applied.
Use in a well ventilated space away from any sources of ignition.
Visqueen Waterstop Adhesive is applied using a standard mastic skeleton gun.
Installation
Bed the Visqueen waterstop on an approximate 10mm continuous bead of Visqueen Waterstop Adhesive and press firmly into position. When applying the adhesive, adjust the size of the bead to compensate for the substrate surface finish. The bead should be sufficient to level out any minor roughness in the substrate and should extrude slightly from either side of the waterstop when the waterstop is pressed into position.
Application of the waterstop must be completed within 90 minutes of applying the adhesive.
Usable Temperature Range
It is recommended that Visqueen Waterstop Adhesive should not be installed below 5°C.
Data sheet
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Horizontal Construction Joints
Vertical Construction Joints
Day Joints
Retaining Walls - Application Method
- Poured
- Single, Two or Three Pack
- Single
- Coverage
- 8 - 10 linear metres (when applied as 10mm bead)
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 12 months
- Size
- 310ml
- Base Type
- Polyurethane
- Working Time
- 90 minutes
- Suitable For Use On
- Retaining Walls
- Suitable For Use On
- Vertical Construction Joints
- Suitable For Use On
- Horizontal Construction Joints
- Application Method
- Gun
- Usages
- Waterproofing
- Product Usage Type
- Adhesive
- Cure Rate
- Approximately 1.8mm per day
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Visqueen Waterstop Adhesive is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT