- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Visqueen Axiom Guard PRO Topcoat is a UV resistant coating for Visqueen Axiom Guard PRO liquid-applied membrane, suitable for pedestrian traffic and when finished with kiln dried silica sand, it provides an anti-slip surface.
- When used in conjunction with Visqueen Axiom Guard PRO Topcoat, Visqueen Axiom Guard PRO is suitable for use on surfaces that are subject to total permanent immersion in water
- BBA certified (23/6868) - third party accreditation
- UV resistant - suitable for exposed locations
- Hard wearing - suitable for pedestrian traffic
- Wet coating suitable to receive silica sand finish - provides anti-slip surface
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Description
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Visqueen Axiom Guard Pro Topcoat is a high performance, two-component polyurethane coating with a gloss finish. The two-component coating is supplied in separate tins which are mixed together; Part A (4.3kg) and Part B (0.7kg).
Visqueen Axiom Guard Pro Topcoat is available in dark grey or clear as standard. Other colours are available on request. Contact our sales team on 0113 2455450 or send a message to [email protected] with your requirements.
Quick Links - Click To Jump To Section:
Storage and Handling
Visqueen Axiom Guard Pro Topcoat should be stored upright, in a dry well-ventilated area, under cover and in its original packaging. Store away from any sources of ignition at temperatures between 5ºC and 30ºC.
To avoid the risk of spillage, always store and transport in a secure upright position. The unopened product has a minimum shelf life of 12 months.
Use in a well ventilated space away from any sources of ignition. Keep the container closed when not in use.
Once the tins have been opened, they should be used immediately. The coating is not suitable for storing once the two components have been mixed together.
Care should be taken when handling the product in line with current manual handling regulations.
Preparation
The previously applied Visqueen Axion Guard Pro membrane should be cured, clean, dry and free from frost, dust, loose material or contamination.
In specifications where multiple coats of Visqueen Axiom Guard Pro Topcoat are applied, the previous layer should be cured, clean, dry and free from frost, dust, loose material or contamination.
Visqueen Axiom Guard Pro Topcoat should be applied in dry conditions only. The substrate should be dry and there should not be any risk of rainfall prior to curing.
Visqueen Axiom Guard Pro Topcoat typical coverage is 20m² per 5kg (250g/m² per coat).
The product is installed using 100mm solvent resistant short nap rollers for detailing areas and a 225mm solvent resistant short nap rollers with an extension handle for the main area. Rollers are not reusable and must be disposed appropriately after use.
The coating is obtained by mixing 100% of the two components, Part A and Part B.
Installation
Open the Visqueen Axiom Guard Pro Topcoat tins and pour Part B into Part A. Mechanically stir the contents at a slow speed for minimum two minutes to ensure that the two components are fully mixed.
Roller apply the Axiom Guard Pro Topcoat coating as a thin layer at a coverage rate of 250g/m².
Where a non-slip finish is required, after minimum 48 hours apply a further coat of Visqueen Axiom Guard Pro Topcoat and whilst the coating is still wet, broadcast kiln dried silica sand or other approved aggregate into the surface.
Usable Temperature Range
Visqueen Axiom Guard Pro system should be installed within the following temperature range; ambient temperature and substrate temperature should be minimum 5°C and not exceeding 30°C.
Product Details
11506-1015604
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete Floors
Flush Pointed Masonry Walls
Wet Rooms
Wet Room Tile Backing Boards
Balconies
Terraces
Walkways
Bund Walls
Permanent Immersion
Flat Roofing - For Use On
- Below Ground Substructures
Podium Decks
Retaining Walls
Lift Pit Walls
Cast Concrete
Precast Concrete
Flush Pointed Blockwork
Flush Pointed Brickwork
Steelwork
Vertical Applications
Horizontal Applications - Application Method
- Roller
- Single, Two or Three Pack
- Two-Pack
- Coverage
- 20m² per 5kg (250g/m² per coat)
- Max. Application Temperature
- 30ºC
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 12 months
- Size
- 5KG
- UN Number
- UN1139
- Dry to Recoat (at 23°C)
- 48 hours
- Pot Life
- at 23ºC: 1 hour
- Walk-on Time
- at 23ºC: 24 hours
- Suitable For Use On
- Blockwork (Flush Pointed)
- Suitable For Use On
- Vertical Surfaces
- Suitable For Use On
- Cast Concrete
- Suitable For Use On
- Precast Concrete
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Masonry Walls (Flush Pointed)
- Suitable For Use On
- Podium Decks
- Suitable For Use On
- Walkways
- Suitable For Use On
- Terraces
- Suitable For Use On
- Lift Pits
- Suitable For Use On
- Horizontal Surfaces
- Suitable For Use On
- Brickwork (Flush Pointed)
- Suitable For Use On
- Steelwork
- Suitable For Use On
- Flat Roofs
- Suitable For Use On
- Below Ground Substructures
- Suitable For Use On
- Wet Rooms
- Suitable For Use On
- Balconies
- Suitable For Use On
- Wet Room Tile Backing Boards
- Suitable For Use On
- Retaining Walls
- Suitable For Use On
- Immersed Surfaces
- Suitable For Use On
- Bund Walls
- Finish
- Gloss
- Application Method
- Roller
- Usages
- Pedestrian Traffic
- Usages
- UV Resistant
- Product Usage Type
- Topcoat
- Product Range
- Axiom
- Tack-Free Time
- at 23ºC: 2 hours
- Colour Family
- Clear
- Colour Family
- Grey
- Industry Approved System
- BBA
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Visqueen Axiom Guard PRO Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT