- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 5 silk-gloss grey colours.
- Flooring sealer topcoat for Remmers Water Vapour Diffusion systems.
- 10kg of BS3000 with 15kg SBL filler.
- Selected RAL colours available on request.
Please Note: Light Grey and Silver Grey are ready mixed colours, all other colours are subject to a lead time of 14-21 Working Days
Product customisation
Don't forget to save your customization to be able to add to cartWater-based, pigmented, silk-gloss sealant, for use as:
- Sealant in Remmers Water Vapour Diffusion-Open systems
- Topcoat on Remmers Water Vapour Diffusion-Open blinded coatings
- System component in TÜV PROFICERT-product Interior certified systems (707106482-4, -5)
- Topcoat in the system Remmers Deck OS 8 WD
- Water vapour diffusion capable
- Contains no plasticisers, nonylphenols or alkylphenols
- Physiologically harmless once fully cured
Notes:
- Unless otherwise specified, all of the values and application rates given above have been determined under laboratory conditions (20 °C) using standard colours. Slight deviations from these values may arise if the product is worked with on site.
- When coating continuous surfaces, only use materials with the same batch number as slight differences in colour, gloss and texture may occur.
- When repairing surfaces or working up to existing surfaces, there will be a visible transition in appearance, texture and degree of gloss.
- Shades of colour with low hiding power (e.g. yellow, red or orange) tend to have a translucent effect on the subsequently applied sealant. In such cases, a colour-coordinated construction, e.g. light grey, is necessary.
- The sealant has a slightly textured surface typical for this type of system.
- In order to achieve even surfaces, appropriate allowances for roughness depth must be taken into consideration.
- Abrasive mechanical loads leave traces of wear.
- Suitable for vehicle traffic with rubber tyres; not suitable for vehicle loads with metal or polyamide tyres nor for dynamic point loads.
- Epoxy resins are generally not colourfast when exposed to UV light or weather.
- The colour stability of the sealant can be improved by using a UV-absorbent polyurethane sealant.
- Observe the corresponding test certificate for OS 8 systems.
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Floors
- Application Method
- Trowel
Roller
Brush - Single, Two or Three Pack
- Three-Pack
- Coverage
- Base layer for blinded coatings: min. 0.30 kg/m² binder
Sealant: approx. 0.15-0.25 kg/m² binder per coat
Top sealant: approx. 0.60-0.80 kg/m² binder per coat - Min. Application Temperature
- 8°C
- Waiting time
- min. 16 hours and max. 48 hours
- Drying time
- Foot traffic after 1 day
Mechanical loads after 3 days
Full loading capacity after 7 days - Base Type
- Water-Based
- Working Time
- 30 minutes
- Suitable For Use On
- Floors
- Finish
- Silk-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Trowel
- Product Usage Type
- Sealer
- Colour Family
- Grey
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Remmers Epoxy BS 3000 Kit is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT