- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Matt white.
- For wood and timber, chipboard, plywood, tongue and groove, fibre insulation board, veneering (≥ 12mm thickness), MDF.
- Commercial and domestic environments, including: airports, restaurants, railways stations, housing, flats, shopping centres, community housing, ceilings, etc.
- Achieves Euroclass B s2 d0 (replaces UK Classes ‘0’ and ‘1’ BS 476 Part 6/7*).
- Reduces ignitability for interior surfaces.
- Single-pack waterborne coating.
- Can be overcoated with waterborne, non-flammable paints.
- Simple certificate application following purchase and application.
- Check the full product listing here for full information.
Please always refer to the downloadable PDF's from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Interior / Exterior Use
- Interior Use
- Single, Two or Three Pack
- Single
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- Approx. 6 hours
- Coverage
- 3.7m² per litre
- Recommended Dry Film Thickness
- 170 microns
- Recommended Wet Film Thickness
- 270 microns
- Base Type
- Water-Based
- Suitable For Use On
- Wood
- Suitable For Use On
- Plywood
- Suitable For Use On
- Chipboard
- Suitable For Use On
- Fibre Insulation Board
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Basecoat
- Best Seller
- Best Seller
- Fastest Delivery
- Next Working Day
- Colour Family
- White
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Matt Fire Retardant Paint For Wood is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Zeroflame Fire Retardant Treatment
For use on bare, solid wood with a minimum thickness greater than 12mm. Soaks virtually ‘invisibly’ into the wood. Achieves Euroclass B s2 d0 (replaces UK Classes ‘0’ and ‘1’ BS 476 Part 6/7*). Can be overcoated for decorative purposes with waterborne, non-flammable stains, varnishes and paints. For internal and external use. Simple...
Zeroflame Aquasteel WB+
White thin-film waterbourne intumescent coating with new and improved formula to provide 30 and 60 minutes fire resistance on standard structural steel members in internal environments. It provides an easier and more efficient alternative to cladding steel members in plasterboard. New improved formula Achieves both 1/2 hour and 1 hour fire...
Zeroflame Aquasteel WB+ Finish
A hard-wearing flame-retardant topcoat with 4,400+ colours for application over Zeroflame Aquasteel WB+ Intumescent Coating: Class 0 fire rated finish on bare or previously painted non-combustible surfaces Hard wearing, water-based acrylic eggshell, matt or solvent-based gloss finish High coverage rates Important! Should be used in...
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...