- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Light grey and steel grey satin matt colour options.
- Water-based and suitable for concrete and garage floors, and light to medium duty (normal foot traffic/limited vehicular traffic).
- Good resistance to diesel, motor oil, coolant fluid, various household chemicals and most types of tyre.
- Quick-drying.
- Easy to apply and touch dry after just 2 hours.
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Data sheet
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete Floors
- Application Method
- Brush
Roller - Sheen
- Satin
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Dry to Handle (at 20°C)
- 6 Hours
- Dry to Recoat (at 20°C)
- 6 Hours
- Fully Cured (at 20°C)
- 1 Week
- Coverage
- 9m² per litre
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 10°C
- Solids by Volume
- 38% - 42%
- VOC
- 72g/L
- Shelf Life (from date of manufacture)
- 5 years
- Touch Dry
- 2 Hours
- Recommended Dry Film Thickness
- 40 µm
- Recommended Wet Film Thickness
- 100 µm
- Base Type
- Epoxy-Modified Acrylic
- Base Type
- Water-Based
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Garage Floors
- Finish
- Matt
- Finish
- Satin
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Abrasion Resistant
- Usages
- Chemical Resistance
- Usages
- Oil Resistant
- Product Usage Type
- Topcoat
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Grey Satin Matt Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum Epoxyshield Cleaner / Degreaser
Clear, colourless cleaning liquid. For coated, mineral, and steel substrates. Removes grease, oil, and other contaminants. Virtually odour-free and non-flammable. Can be used with sponges, brushes, or high-pressure cleaners.
Rust-Oleum Epoxyshield Decorative Flakes
Suitable for use on floors coated with Epoxyshield. Mix and match chip blends to customise your colour scheme. Helps to hide dirt and surface imperfections. Durable and long-lasting finish. Easy to apply.
Rust-Oleum 5200 Epoxyshield Ultra
Quick-drying water-based floor coating available in various greys. For concrete floors and old coatings. Satin matt finish. Good resistance to car tyres, diesel, motor oil, coolant fluid, and various household chemicals. Touch dry in just 2 hours.
Rust-Oleum 5300 Epoxyshield Maxx
A water-based industrial floor coating available in greys. For use on trafficked concrete floors. Highly resistant to solvents, chemicals, and car tyres. Easy to apply with no primer required. Long-lasting, glossy finish.
Rust-Oleum Epoxyshield Fine Crack Repair
Available in Grey. Ideal for repairing fine cracks up to 3 mm wide on concrete floors. Non-shrink, solvent-free epoxy for durable repairs. Quick drying time: 3-4 hours.
Rust-Oleum Epoxyshield Garage Floor Coating Kit
Available in grey. For clean and dry concrete floors, including old adhering coatings. Resistant to gasoline, antifreeze, motor oil, salt, and hot tire pick-up. Comes with a complete kit and detailed instructions for easy application.
Rust-Oleum Epoxyshield Concrete Repair Mortar
Available in grey. Powdered repair mortar for levelling and repairing concrete. Also for cement renderings and unpainted brickwork. Internal or external use. Recoatable after 48 hours, traffic allowed after 24 hours. Professional use only.
Rust-Oleum 5220 Epoxyshield Sealer
Clear gloss finish. Water-based sealer for concrete. Reduces dust, simplifying cleaning. For bare and clean concrete floors. No thinning required. Touch dry in 1 hour, walkable after 8-12 hours.
Floor Application Kit
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...