- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 10+ Colours.
- Aerosol paint for rust protection and metal surfaces.
- For rust, bare metal, or primed steel for small maintenance jobs or touch-ups.
- High gloss finish.
- Lead- and chromate-free with rust-inhibitive pigments for added corrosion protection.
- Dry to handle in 6 hours; fully cured in 7 days.
Rust-Oleum CombiColor Original Aerosols - Rust Prevention Spray Topcoat
CombiColor Original Aerosols offer a convenient, high-performance solution for metal protection and rust prevention. This single pack aerosol paint is designed for easy application directly onto rust, bare metal, or primed surfaces. Its unique formula combines primer and topcoat in one, providing excellent coverage and a high gloss finish without the need for additional coats.
Applications and Uses
Ideal for small maintenance tasks and touch-ups, CombiColor Original Aerosols are perfect for use in light industrial settings, normal humidity, and interior applications. It can be applied on a variety of surfaces including:
- Bare metal
- Manually derusted metal
- Primed steel with CombiPrimer Anti-Corrosion
Application Instructions
For optimal results, ensure the surface is clean and free from contaminants such as dirt, grease, and oil. Sand intact coatings to provide a proper key for adhesion. During application, shake the can vigorously for at least one minute after the mixing ball is heard. Hold the can approximately 25 cm from the surface and apply several thin layers, allowing a few minutes between coats. Avoid applying too thick layers to prevent drying and sagging issues.
Safety and Handling
CombiColor Original Aerosols are designed with user safety in mind. Always use in a well-ventilated area and avoid inhaling vapors. Store in a cool, dry place away from direct sunlight and heat sources. Follow all safety instructions on the can and consult the Safety Data Sheet (SDS) for more detailed information.
Health and Safety
- UN Number: UN1950
- Hazard Statements: H222, H229 - Extremely flammable aerosol. Pressurised container: may burst if heated.
- Safety Information: Contains rust-inhibitive pigments. May produce an allergic reaction. Consult Safety Data Sheet for detailed health and safety information.
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Rusted Metal
Blasted Metal
Bare Metal - Application Method
- Aerosol
- Sheen
- Gloss
Satin - Pack Size
- 400ml Aerosol
- Dry to Handle (at 20°C)
- 6 hours
- Dry to Recoat (at 20°C)
- 2 hours
- Fully Cured (at 20°C)
- 7 days
- Recommended Thinner/Cleaner
- Rust-Oleum 7301 CombiColor Thinner
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 5°C
- Heat Resistance (up-to)
- 90°C (dry heat)
- VOC
- 535 - 540 g/L
- Shelf Life (from date of manufacture)
- 5 years
- Touch Dry
- 6 hours
- UN Number
- UN 1950
- Consumption
- 2 - 3 m² per spray can (400 ml)
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Blasted Metal
- Suitable For Use On
- Bare Metal
- Suitable For Use On
- Rusted Metal
- Finish
- Satin
- Finish
- Gloss
- Application Method
- Aerosol
- Usages
- Anti-Corrosion
- Product Usage Type
- Primer & Topcoat
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
Questions
Question about the product
David Livesey on 2023-01-24 12:25:16 | Question:
I need to find a paint or spray that can withstand up to 250 degrees C . The paint needs to be available in 6 specific colours . They are RED , YELLOW, ORANGE , BLUE , WHITE , GREEN . Can you help |
Answer from Rawlins’ Technical Team:
Assuming the substrate is compatible, it is clean, dry, sound and prepared as detailed in the technical data sheet you could consider Jotun Solvalitt. This is a heat resistant coating suitable for insulated and non insulated surfaces, Solvalitt is recommended as a finish coat for insulated surfaces, in systems with suitable primers. This is heat resistant upto 600°C and can be mixed to many RAL, NCs or BS colours in a matt finish. | |
Carl Perry on 2018-09-07 08:23:44 | Question:
Is there any chance you could make up light ivory RAL1015 in aerosol cans, thanks Carl. |
Answer from Rawlins’ Technical Team:
Rust-Oleum Hard Hat Topcoat is available in RAL 1015 Light Ivory. | |
Clare Jones on 2018-08-21 15:47:08 | Question:
Wanting to spray paint a bird cage are your paints safe to use on the cage for my cocktaoo? Thank you |
Answer from Rawlins’ Technical Team:
Whilst the CombiColor aerosols are not inherently toxic, these are intended for industrial applications. Consequently no tests have been conducted on them to determine suitability or otherwise with any animals. | |
frank johns on 2016-01-15 22:29:13 | Question:
Any reason why you only have 10 colours available in Rust-Oleum CombiColor Aerosols when you have lots of colours available in Rust-Oleum CombiColor? I need RAL 9010 and RAL 2004 in spray form. |
Answer from Rawlins’ Technical Team:
Rust-Oleum CombiColor Aerosols are only available in a range of ready produced colours. If you require a colour outside of what is available then you can purchase Rust-Oleum Custom Filled Aerosols which allow us to mix Rust-Oleum CombiColor in any colour (Satin or Gloss finish) and then fill it into aerosols. These aerosols have to be bought in packs of 8 x 400ml aerosols per colour. Alternatively there may be suitable colours available individually in the Rust-Oleum Hard Hat Topcoat which is a similar product. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum CombiColor Original Aerosols is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum 7301 CombiColor Thinner
A clear liquid thinner, ideal for use on the Rust-Oleum CombiColor product range. Provides good thinning properties for various applications. Specially formulated for air-atomised spraying CombiColor topcoats.
Rust-Oleum Thinner 160
High dilution capacity thinner. Can be used on various Rust-Oleum coatings and as a strong glue remover. Long shelf life of up to 5 years when stored correctly. For professional use.
Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion
Available in grey and red, can or aerosol. Two-pack anti-rust primer for new or slightly rusted surfaces. For steel surfaces, provides and enhance protection against corrosion. Recoatable after 2 hours; fast drying and lead- and chromate-free. 5-year shelf life if stored properly.
Rust-Oleum 3302 CombiPrimer Adhesion Primer
Available in a transparent blue finish. Highly effective adhesion primer for ensuring smooth surfaces are coatable. For galvanised steel, stainless steel, aluminium, copper, glass, and porcelain. High coverage of 50 m²/L. Recoatable after just 30 minutes.
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...