Assuming application is externally, this product would be regarded as damp-resistant, assuming it has been applied in accordance with the technical data sheet to a clean, dry, sound prepared substrate.

If you could advise what the full exposure will be, we can advise if this is a suitable product, please e-mail [email protected].

Assuming the horse trailer is bare, clean, dry and sound and prepared in accordance with the technical data sheet, this product would be suitable for this application.

However, please bear in mind it's not been tested to determine the suitability in close proximity with animals, as it's not an intended use.

This product can be applied to prepared gelcoat, if the area to be painted is on a boat, it would not be suitable for use in the splash zone or below the waterline.

Unfortunately no, this is not suitable for application to a roof.

Assuming the terracotta pots are clean, dry, sound and prepared as detailed in the technical data sheet this can be used.

Rust-Oleum CombiColor Multi-Surface can be applied on many different substrates like wood, metal*, uPVC, mdf, masonry, tiles, most plastics, old concrete and more. We advise to do a small adhesion test prior to the application of the full surface. CombiColor Multi-Surface is intended for brush and roller application.  *For metal structures in a more aggressive industrial environment, Rust-Oleum advise CombiColor Original in combination with Rust-Oleum CombiPrimer Anti-Corrosion 3369/3380.

Assuming the paint has now dried we would recommend seeking the advice of an automotive bodyshop regarding removal.

Although it is not what Rust-Oleum CombiColor was primarily designed for it is used for this type of application regularly.

Rust-Oleum CombiColor Original has been used for this application as it has more corrosion protection.

You will find numerous videos on YouTube of people doing similar projects by brush and roller.

On bare ferrous metals Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion is always recommended to be used before application of the CombiColor.

This is not designed to be overpainted with another product after application.

Unfortunately no this is not suitable for this application.

Smartkote Protectakote UVR Smooth can be applied to many rubber substrates assuming they are clean, dry, sound and prepared as detailed in the technicasl data sheet.

The rubber must be cleaned with Xylene, we would recommend testing for compatibility and adhesion prior to full application.

Thank you for the enquiry, unfortunately we do not have a paint we can recommend for this application to wooden worktops.

The manufacturer does not state a life expectancy.

No, but assuming the plastic canoe is clean, dry, sound, thoroughly abraded and prepared as detailed in the technical data sheet we can recommend Teamac High Performance Polyurethane Topcoat.

Unfortunately not, we wouldn't have anything we could recommend for this application.

Thank you for the enquiry, we have contacted you directly for more information.

Unfortunately we do not have a product to recommend without preparation, assuming the wooden doors are internal, clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Zinsser B-I-N followed by Zinsser Perma-White Interior.

Assuming the sealant used states it is over paintable, it is clean, dry, sound and prepared as detailed in the Technical Data sheet it will adhere to the sealant.

If the colour is mixed on a D Base then they no longer manufacture this in a 1lt.

No, assuming the tiles are clean, dry and sound we can recommend Rust-Oleum 7201 Universal Floor Primer followed by Rust-Oleum 7200 Floorcoat PU.

If an antislip finish is required Rust-Oleum Non-Skid Additive NS 100 can be added.

This product is suitable for application to most plastics assuming the substrate is clean, dry and free from anything that can effect adhesion. We would recommend testing for adhesion on a small area prior to full application.

Assuming the substrates are clean, dry and sound, the aluminium trim is primed with Rust-Oleum 3302 CombiPrimer Adhesion we can recommend Rust-Oleum CombiColor Multi-Surface

for this application. For added corrosion protection we advise to prime the steel areas with Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion.

We can recommend Rust-Oleum Thinner 160.

This product is suitable for application to most metals and plastics assuming they are clean, dry and free from anything that can effect adhesion.

We would recommend completing an adhesion test on a small area prior to application.

If the metal is bare stainless steel or aluminium we would recommend the use of Rust-Oleum 3302 CombiPrimer Adhesion first.

Assuming the door is sound, dry and abraded, previously painted timber or aged UPVC this product can be used to paint a door.

Lighter shades can be painted on top of darker paint but may require more coats to cover.

This product will adhere to concrete but we would not advise this for use on steps.

For this application we can recommend Rust-Oleum 7100NS Anti-Slip Floor Coating assuming the concrete is aged, clean, dry and sound.

The temperature limit for this paint is 80°c. As we don’t know what actual surface temperature the heater will get up to we can’t say for sure if the paint will be OK on any particular heater, it could depend on the model, type etc. You will need to check with the manufacturer to find out what the surface temperature of their particular heater will get to during use. 

If it exceeds 80°c you could consider Blackfriar Quick Drying Radiator Paint this will take temperatures up to 150°C and is available in a white semi-gloss finish.

Rust-Oleum CombiColor Multi-Surface would be ideal for this application. Download the product data sheet from the 'Attachments' tab on the product page for details on preparation, application, etc.

Galvanised steel would need priming initially with Rust-Oleum 3302 CombiPrimer Adhesion

Yes, first remove oil, grease and all other surface contaminations by cleaning in combination with appropriate detergents (e.g. Rust-Oleum Pre-Paint Cleaner). Remove all loose coatings by scraping, wire brushing or sanding. Sand intact coatings to roughen the surface slightly. Test before application the compatibility with the old coating. The surface must be clean and dry during application.

Yes, Rust-Oleum CombiColor Multi-Surface can be used internally and externally and is suitable for application to uPVC.

No, we would instead recommend Smartkote Protectakote UVR.

Rust-Oleum CombiColor Multi-Surface is suitable to be applied to glass but wouldn't be suitable for a table top, it may work better to coat the underneath of the table top so the colour shows through but the glass top can still take the wear and tear.

Rust-Oleum CombiColor Multi-Surface is available in the following colours in a Satin finish - RAL 9005, 9010, 7001, 9001 and 9016. It is also available in a Matt finish in Black and White. We wouldn't recommend adding any matting agents into this product, however if none of the above colours meet your requirements then our Techincal Team may be able to recommend an alternative product in a satin finish for your use - 0113 2455450 (option 2) or email you project details to [email protected] 

The data sheet for Rust-Oleum CombiColor Multi-Surface advises: 'For metal structures in a more aggressive industrial environment we advise CombiColor Original in combination with Rust-Oleum CombiPrimer Anti-Corrosion 3369/3380.' For details of VOC levels on all products, these can be found in the product data sheets available to download from the 'Attachments' tab on each product page.

Yes, we are able to mix this to nearly all RAL colours now (RAL 8011 Nut Brown is no problem), website will be updated soon to reflect this but in the meantime you can order via phone on 0113 2455450 (option 1).

Not quite sure of the surface you're trying to paint here but Rust-Oleum CombiColor Multi-Surface would be a good place to start. Carry out a test area if unsure to ensure adhesion, appearance, etc.

Rust-Oleum CombiColor Multi-Surface is OK to be applied to tiles but not in a shower area where it will be in contact with water from the shower.

We are not familiar with the specific product you have mentioned but if your gates are metal and need recoating we would suggest the original version of Rust-Oleum CombiColor rather than the Multi-Surface version. Assuming the existing paint is sound and well adhered you should just be able to clean down, lightly sand and apply 2 coats of Rust-Oleum CombiColor in the desired colour and finish.

The only product we recommend for worktops is Rust-Oleum Worktop Transformation Kit.

To create a Chalkboard surface we would instead recommend Rust-Oleum Chalkboard Paint (Brush) which is available in 5 different colours.

No, we would instead recommend Rust-Oleum Worktop Transformation Kit.

Yes (as long as it isn't to be applied to worktops), sanding down would be ideal, ensure the surface is then dust and grease free.

After cleaning Rust-Oleum CombiColor Multi-Surface can be applied directly to wall tiles as long as they are not subjected to frequent/heavy water contact (i.e. in a shower enclosure).

Rust-Oleum CombiColor Multi-Surface should be applied by brush or roller and thinning is generally not required, for cleanup use Rust-Oleum Thinner 160.

We're not sure what you mean by 'hot services' but if you're looking for a heat resistant paint for areas of BBQ/Fire Pits that don't come in direct contact with food or flames you should instead consider Rust-Oleum Heat Resistant Paint 750°C.

Yes.

Yes, Rust-Oleum CombiColor Multi-Surface can be applied to uPVC surface but surfaces to be painted must first be cleaned down with a 5% solution of Rust-Oleum Mathys ND14 Cleaner Degreaser followed by a solvent wipe with Methylated Spirits.

No, Rust-Oleum CombiColor Multi-Surface must not be used for either of these applications. For worktops we have Rust-Oleum Worktop Transformation Kit and for sinks we have Rust-Oleum Tub & Tile Refinishing Kit.

No, this product is only recommended for application by brush or roller. The Zinsser AllCoat Exterior (Water Based) range can be applied by spray as well as brush and roller.

Normally, the Rust-Oleum Chalky Finish Furniture Paint can be applied directly to various different substrates, including most existing paints. So assuming the CombiColor Multi Surface was in good condition, clean, dry and well adhered to the underlying substrate, then yes this should be possible.

Rust-Oleum CombiColor Multi-Surface has not been tested for such use. We believe that any paints used for toys or childrens play equipment has to be tested and approved to EN71. As CombiColor Multi Surface is intended primarily as an industrial coating, it has not been submitted for such approval.

We don't have samples but we do have a colour chart we can post if you can provide your address to [email protected]

Yes.