Follow us on:

Matt White Fire Retardant Paint
Matt White Fire Retardant Paint
Matt White Fire Retardant Paint
Matt White Fire Retardant Paint
Matt White Fire Retardant Paint
Matt White Fire Retardant Paint

Matt White Fire Retardant Paint

ZFP400007
ZER12075
  • Matt white fire retardant paint for interior wood. 
  • Achieves Euroclass B s2 d0 (replaces UK Classes ‘0’ and ‘1’ BS 476 Part 6/7*).
  • Can be overcoated with waterborne, non-flammable paints.
  • Simple certificate application following purchase and application.
  • Can be applied by brush, roller or spray.
  • Check the full product listing here for full information.
Product Name
Colour
Size
£169.15(incl. VAT)
£140.96(ex. VAT)
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Please always refer to the downloadable PDF's from the "Data Sheets" tab for more information on:

  • Technical Data
  • Suitable Surfaces and Substrates
  • Substrate Preparation
  • Application Instructions
  • Suitable Primers/Topcoats (where applicable)
  • Drying Times
  • Application Equipment
  • Health & Safety Information
  • Warranty



IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.



Product Details
391-884702

Data sheet

Interior / Exterior Use
Interior Use
Single, Two or Three Pack
Single
Application
Brush, Roller, Spray
Touch Dry (at 20°C)
Approx. 6 hours
Coverage
3.7m² per litre
Recommended Dry Film Thickness
170 microns
Recommended Wet Film Thickness
270 microns
Base Type
Water-Based
Suitable For Use On
Wood
Suitable For Use On
Plywood
Suitable For Use On
Chipboard
Suitable For Use On
Fibre Insulation Board
Finish
Matt
Application Method
Brush
Application Method
Roller
Application Method
Spray
Product Usage Type
Basecoat
Best Seller
Best Seller
Fastest Delivery
Next Working Day
Colour Family
White
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Matt White Fire Retardant Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates and do not take into account any substrate deviations or wastage

You might also like
Zeroflame Fire Retardant Treatment For Timber & Wood | Fire Protection

Zeroflame Fire Retardant Treatment

For use on bare, solid wood with a minimum thickness greater than 12mm. Soaks virtually ‘invisibly’ into the wood. Achieves Euroclass B s2 d0 (replaces UK Classes ‘0’ and ‘1’ BS 476 Part 6/7*). Can be overcoated for decorative purposes with waterborne, non-flammable stains, varnishes and paints. For internal and external use. Simple...

Price £195.80 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Zeroflame Aquasteel WB+

Zeroflame Aquasteel WB+

White thin-film waterbourne intumescent coating with new and improved formula to provide 30 and 60 minutes fire resistance on standard structural steel members in internal environments. It provides an easier and more efficient alternative to cladding steel members in plasterboard. New improved formula Achieves both 1/2 hour and 1 hour fire...

Price £104.40 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Zeroflame Aquasteel WB+ Flame-Retardant Finish

Zeroflame Aquasteel WB+ Finish

A hard-wearing flame-retardant topcoat with 4,400+ colours for application over Zeroflame Aquasteel WB+ Intumescent Coating: Class 0 fire rated finish on bare or previously painted non-combustible surfaces Hard wearing, water-based acrylic eggshell, matt or solvent-based gloss finish High coverage rates Important! Should be used in...

Price £76.01 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
General Painting Application Kit

General Painting Application Kit

Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...

Price £12.08 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery