- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A fast curing, high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be used in lower temperatures or when a fast return to service is required.
- Fast curing even at lower temperatures
- May be applied to dry or damp surfaces
- Also available in 4,000+ colours from NCS, RAL, BS
- Available in Smooth and Anti-Slip* options
- *250 micron grade of 508 Anti-Slip Additive will be added at 2.4% prior to receipt
- Low odour
- Easily applied
- Excellent resistance to water, oils, skydrol, petrol, dilute acids, alkalis & many solvents
- Very good adhesion to concrete
- Slip resistant options
- Images are for illustrative purposes only & may differ from the actual product
- This product is for Professional Use Only
Product customisation
Don't forget to save your customization to be able to add to cart303 WG Epoxy Floor Paint is a fast curing, high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be used in lower temperatures or when a fast return to service is required. 303 WG Epoxy Floor Paint is user and environmentally friendly, containing no solvents and is very low odour during application.
303 WG Epoxy Floor Paint may be easily applied by brush, roller or airless spray, to provide a decorative, abrasion and chemically resistant coating of excellent durability. It leaves a smooth satin finish when dry.
Anti-slip properties of the coating can be enhanced by the addition of 508 Fine Particle Anti-Slip Additive can be added to the coating (200g per 5kg of 303 WG Epoxy Floor Paint) during mixing prior to application to produce an even and easily cleanable texture to the dried surface.
Note: For our ultimate slip resistance see 502 HD Anti-Slip Coating.
This product is for Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Slip Resistance
- Coverage
- Surface Preparation
- Application
- Cleaning
- Curing
- Limitations
- Storage & Shelf Life
- Health & Safety
Features & Benefits
- Fast curing even at lower temperatures
- High performance
- Water dispersible
- Contains no solvents
- May be applied to dry or damp surfaces
- Available in a wide range of colours
- Low odour
- Semi-Gloss finish
- Easily applied
- Excellent resistance to water, oils, skydrol, petrol, dilute acids, alkalis and many solvents
- Very good adhesion to concrete
- Hygienic and easily cleaned
- Slip resistant options
- Suitable for use as a floor covering in food factories, abattoirs, dairies, laboratories, warehouses, etc.
- Can also be used as a chemically resistant coating for bund areas
- A hygienic, easily cleanable surface on walls, ceilings etc.
- Ideal where a fast return to service is required or when application must be carried out in lower temperatures
Typical Properties
Technical Data | |
---|---|
303 Epoxy Floor Paint | |
Pot life @ 20°C: | 60 Minutes |
Pot life @ 10°C: | 120 Minutes |
Application Temperatures: | Min. 3°C Max. 30°C |
Coverage: | 0.20-0.25kg/m²/coat |
Volume Solids: | 65% |
Finish: | Semi-Gloss |
Chemical Resistance | |
---|---|
Chemical | Resistance |
Water | Excellent |
Dilute Acids and Alkalis | Excellent |
Glycol Ethers | Excellent |
Dibasic Ester Solvent | Excellent |
Skydrol | Excellent |
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Slip Resistance
Should a non-slip finish be required, 508 Fine Particle Anti-Slip Additive can be added to the coating during mixing prior to application to produce an even and easily cleanable texture to the dried surface.
Alternatively the 'Anti Slip' option can be selected when purchasing the product and the 250 micron grade of 508 Anti-Slip Additive will be added at 2.4% prior to receipt.
- 5kg unit - add 200g
- 15kg unit - add 600g
The above recommendation must only be used as a general guideline as the slip resistance of a cured resin coating can vary considerably due to many factors including: application technique, variations in film thickness, dispersion of the anti-slip texturing additive and the surface variations of the substrate and location to where it will be applied.
To obtain accurate PTV readings that are site specific (if required) it is strongly recommended that a slip assessment pendulum test is undertaken on each specific site after completion of the installation when the resin has fully cured.
Coverage
- A 5kg pack is sufficient to treat 10.0-12.5 m² of surface with the recommended two coat treatment, providing an overall d.f.t. of 200-250 microns (15kg pack pro rata)
Surface Preparation
Concrete:
- Concrete shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%
- Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound, and existing paint finishes
- Smooth concrete, or concrete with soft laitance, shall be mechanically treated by diamond grinding or grit blasting to provide a clean profiled surface
- Should this not be practicable then acid etching, although less preferable, is also an option
- Blow holes and defective concrete shall be made good using 201 Epoxy Repair Mortar
- Suitable mechanical treatment, such as vacuum grit blasting, is recommended to ensure a clean, uncontaminated substrate
Metal:
- Metal surfaces shall be wire brushed or power disced to remove any rust and loose or flaking material
- Grit blasting is recommended, where practical, for optimum performance
- Surface should then be immediately coated after preparation with 404 Epoxy Metal Primer
Wood:
- Wood surfaces shall be sanded to a smooth finish, and all previous coating removed
- Previously untreated wood shall be sealed with a coat of 401 Epoxy Floor Primer or 402 Damp Proof Coating
Note: Substrates with high moisture content or oil contamination can still be coated in most instances by the inclusion of one of our specialist primers. Please see 402 Damp Proof Coating and 403 Oil Tolerant Primer for full details.
303 WG Epoxy Floor Paint will not tolerate movement in the substrate, if there is a possibility the substrate may flex, expand and contract, shift etc. use one of our flexible coatings - Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Priming:
- A primer coat of 401 Epoxy Floor Primer is recommended on concrete substrates
- This will facilitate application to damp and/or absorbent surfaces
- Apply the 401 Epoxy Floor Primer at a nominal rate of 0.2kg per m² in accordance with the product data sheet instructions
- Allow the primer to cure for a minimum period of 2 hours @ 20°C
- Ensure good ventilation during the drying/curing period
Mixing:
- Pour the contents of the curing agent container into the base container and thoroughly mix, preferably by mechanical means until a uniform consistency is achieved
- The mixed material may be thinned by the addition of up to a maximum of 10% by volume of clean, potable water
Mixing Ratio:
- By Volume = 1 Base : 2.6 Curing Agent
Application
- Apply by brush, roller or airless spray at a nominal rate of 0.20 to 0.25kg/sq.m. per coat equivalent to a dry film thickness of 100-125 microns
- A minimum two coat treatment is recommended, applying subsequent coats after a minimum interval of 3 hours cure at 20°C
- Ensure good ventilation after application, as this speeds up the physical drying stage of the curing process
- Should a non-slip finish be required, 508 Fine Particle Anti-Slip Additive can be added to the coating during mixing prior to application to produce an even and easily cleanable texture to the dried surface
- Alternatively for a more aggressive anti-slip finish 504 Standard Anti Slip Aggregate can be scattered onto the first coat of 303 WG Epoxy Floor Paint whilst still wet
- The following day any excess aggregate may be swept from the surface using a clean brush prior to application of the second coat
Cleaning
- Clean equipment with 109 Tool Cleaner prior to curing of the coating
Curing
- Allow to cure for a minimum of 3 hours @ 20°C prior to light foot traffic access and 8 hours @ 20°C prior to vehicular trafficking
- 7 days cure @ 20°C is recommended prior to exposure to chemicals
- Good ventilation is essential for satisfactory curing of the coating
- Lower temperatures will extend the curing time
Limitations
- Do not apply to wet or uncured concrete surfaces
- Do not apply at temperatures of 3°C or less
- In poorly ventilated areas forced extraction must be provided
Storage & Shelf Life
- Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C
- 303 WG Epoxy Floor Paint has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions
Health & Safety
- Avoid contact of the material with skin and eyes
- Wear gloves and goggles
- Wash off splashes immediately with soap and water
- Any eye contamination must be rapidly irrigated with copious amounts of water, and immediate medical attention sought
- Please refer to Material Safety Data Sheet for additional Information
- 303 WG Epoxy Floor Paint shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete, Metal, Wood
- Application Method
- Brush, Roller, Spray
- Sheen
- Satin, Matt, Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG, 15KG
- Minimum Applied Thickness
- 100 microns
- Maximum Applied Thickness
- 125 microns
- Coverage
- 4m² per KG
- Min. Application Temperature
- 3°C
- Min. Application Temperature
- +3°C
- Touch Dry
- 3 Hours
- Resistance to chemicals
- Water, Dilute Acids, Dilute Alkalis, Gycol Ethers, Dibasic Ester Solvent, Skydrol
- Base Type
- Water-Based
- Suitable For Use On
- Timber
- Suitable For Use On
- Metal
- Suitable For Use On
- Concrete
- Suitable For Use On
- Wood
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Components
- 2K
- Usages
- Low Temperature
- Usages
- Winter Grade
- Product Usage Type
- Topcoat
- Product Category
- Paints
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Anti-Slip Texture
- Fine Texture
- Categorised As
- Floor Paints > Low Temperature Floor Paints
- Categorised As
- Floor Paints > Low Temperature Anti-Slip Floor Paints
- Seasonal
- Cold Weather
- Product Type
- Epoxy
Questions
Question about the product
brian Maczka on 2019-11-22 14:34:05 | Question:
1. when can foot traffic resume after application of 303 WG Epoxy Floor Paint? 2. Is a primer coat required? Thanks Brian |
Answer from Rawlins’ Technical Team:
Allow to cure for a minimum of 3 hours @ 20°C prior to light foot traffic access and 8 hours @ 20°C prior to vehicular trafficking. 7 days cure @ 20°C is recommended prior to exposure to chemicals. Good ventilation is essential for satisfactory curing of the coating. Lower temperatures will extend the curing time. A primer coat of 401 WG Epoxy Floor Primer is recommended on concrete substrates. This will facilitate application to damp and/or absorbent surfaces. Apply the 401 WG Epoxy Floor Primer at a nominal rate of 0.2kg per m² in accordance with the product data sheet instructions. Allow the primer to cure for a minimum period of 2 hours @ 20°C. Ensure good ventilation during the drying/curing period. | |
Paul Coomber on 2019-08-13 14:40:11 | Question:
Is 303 WG Epoxy Floor Paint compatible for painting over mastic joints? |
Answer from Rawlins’ Technical Team:
No it doesn’t have the flexibility for this. We recommend taping over the joints and only painting up the edge. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
303 WG Epoxy Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
201 Epoxy Repair Mortar
201 Epoxy Repair Mortar is a high strength, trowel applied, two component epoxy resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces. Pre-packed units – ready to use Fast curing Impact and abrasion resistant Frost resistant and impervious to water Negligible shrinkage Images are for illustrative...
401 Epoxy Floor Primer
2 pack, water dispersible epoxy based primer/sealer/clear coating, especially formulated to meet the technological and ecological requirements of modern building and industrial practice. Ideal for use as a clear sealer on concrete and masonry surfaces. Also available in 4,000+ colours from RAL, BS, NCS See 401 Epoxy Floor Primer -...
404 Epoxy Metal Primer
2 pack, water-based, epoxy, anti-corrosive primer designed for the protection of steelwork. Non toxic Fast drying - touch dry in 1-2 hours @ 20ºC May be applied to damp or dry surfaces Excellent anti-corrosive properties Compatible with a wide range of top coats Long overcoating window Easily applied Very good adhesion Early water...
502 HD Anti Slip Coating
A 3-pack solvent-free high-build epoxy resin system in 10 colours for application as a heavy duty non-slip floor coating for concrete, metal and wood surfaces requiring high levels of slip resistance. Ideal for use in high traffic areas requiring high slip resistance such floors, stairs, ramps, loading bays Also suitable for chemical plant...
504 Standard Anti Slip Aggregate
504 Standard Anti Slip Aggregate is a specially formulated quartz aggregate to be added to various products in our floor coatings range to provide increased `anti-slip` properties in both dry and wet conditions to improve safety. Produces a rough, non-skid surface Hard wearing and chemical resistant Coloured Quartz Aggregate 0.4-0.8mm...
508 Fine Particle Anti-Slip Additive
508 Fine Particle Anti-Slip Additive is a micronized polymer bead ideal for providing a measure of slip resistance when added to coatings and sealers. Available in 3 grades 125 micron 250 micron 500 micron Non-Toxic Controlled particle distribution gives uniform finish Easily incorporated to most coatings and sealers Economical...
109 Tool Cleaner
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins. Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual product More...
402 Damp Proof Coating
2 pack epoxy resin based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes. Also available in 4,000+ colour options from RAL, BS and NCS Please see 402 Damp Proof Coating - Special Colours...