- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 5,000+ satin colours.
- Acts as a cross between a vinyl/leather upholstery paint and a dye.
- Avoid re-upholstering - re-colour leather - simple application.
- Classic car restoration – seats, interiors, vinyl hoods and trim.
- Vehicle upholstery – refurbish, customise.
- Commercial seating – restaurants, hotels, hospitals.
- Leather and vinyl furniture and upholstery – re-colour.
- Boat seating – re-colour.
- Performance and guarantees not valid without purchase and use of VinylKleen & VinylPrep.
Product customisation
Don't forget to save your customization to be able to add to cartRecommended by Gary Mavers of the Youtube classic car renovation channel, Classic Obsession
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Data sheet
- Manufacturer
- Kolorbond
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Solvent
- For Use On
- Vinyl
Leather - Application Method
- Spray
- Sheen
- Matt
Satin - Colour
- Fully Tintable
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 400ml Aerosol
1L - Coverage
- 4m² per litre
- Recommended Thinner/Cleaner
- Gun Cleaner
- Solids by Volume
- 15.3 (Clear) to 19.8 (depending upon the colour)
- VOC
- 740 +/- 85 grams per litre
- Shelf Life (from date of manufacture)
- 1 Year
- Recommended Dry Film Thickness
- 15 - 20 microns
- Recommended Wet Film Thickness
- 75 - 100 microns (Colour)
- UN Number
- UN1263
- Specific Gravity
- 0.85 g/cm3 @ 20ºC
- Solids by Weight
- 15.5 (Clear) to 20.0 (depending upon the colour)
- Flashpoint
- 4ºC (Measured with Seta Closed Cup)
- Oven Cure
- 50 minutes @ 50°C
- Post Cure
- 24 hours @ ambient temperature (16°C)
- Flash Time (Between Coats)
- 10 - 15 minutes @ ambient temperature (16° C)
- Base Type
- Solvent-Based
- Suitable For Use On
- Leather
- Suitable For Use On
- Vinyl
- Finish
- Satin
- Application Method
- Spray
- Manufacturer
- Kolorbond
- Components
- 1K
- Usages
- High UV Resistance
- Product Usage Type
- Topcoat
- Product Range
- Vinyl
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Chartwell Green
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Seasonal
- Cold Weather
- Seasonal
- Warm Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Satin Vinyl and Leather Upholstery Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Kolorbond VinylKleen
Water-based cleaner for PVC and uPVC. Removes contaminants, silicones and oils. To be mixed with water. More Information Delivery Info
Kolorbond VinylPrep
Solvent-based cleaner. For vinyl surfaces prior to Vinylkote application. Removes contaminants such as polish and lacquer. Promotes adhesion. More Information Delivery Info