- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
-
- White intumescent paint.
- For interior structural steel and cast iron universal beams, columns, open sections.
- Up to 90 mins fire resistance.
- Can be overcoated with compatible decorative topcoat.
- Certificate of supply available on request.
- For protection to exterior environment steels, use Thermoguard Thermocoat S.
Important!
- Please note that this product is for Professional Use ONLY and CANNOT be used without first receiving an application schedule from our Technical Department. Please see below.
- Please Note: We strongly recommend Tricomb Plastic Wet Film Gauges are used to help ensure correct film thicknesses are achieved during application.
- Check the full product listing here for full information.
Please note that this product CANNOT be used without first receiving an application schedule from our Technical Department. Please download and complete the 'Thermoguard Steel Enquiry Form' and return by email to [email protected]
If you have any questions regarding this process consult our technical department on 0113 2455450 (option 2).
Thermoguard Thermocoat WI is optimised for Universal Beams, Columns and other open section steel:
For steel hollow sections, see Thermoguard Thermocoat WO Ultimate:
For protection to exterior environment steels, please refer to Thermoguard Thermocoat S.
Please always refer to the downloadable PDF's from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Manufacturer
- Thermoguard
- For Use By
- Industrial Use
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Water
- For Use On
- Steel, Cast iron
- Application Method
- Brush, Roller, Spray
- Colour
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 2.5KG, 5KG, 20KG
- Coverage
- Refer to Technical Department
- Min. Application Temperature
- 4°C ambient temperature
- Touch Dry
- 4 hours
- Touch Dry
- Brush: min. 2 hours/ Spray: min. 4 hours
- UN Number
- N/A
- Dry to Recoat
- Brush: min. 4 hours/ Spray: min. 10 hours
- Dry for Topcoat
- Bush: min. 10 hours/ Spray: min. 48 hours
- Base Type
- Water-Based
- Suitable For Use On
- Structural Steel
- Suitable For Use On
- Cast Iron
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Application Method
- Roller
- Product Usage Type
- Basecoat
- Product Range
- Thermocoat
- Best Seller
- Best Seller
- Fastest Delivery
- Next Working Day
- Colour Family
- White
- Fire Rating
- 60 Minutes
- Fire Rating
- 30 Minutes
- Fire Rating
- 90 Minutes
- Site Application
- On-Site
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Matt White Intumescent Paint System is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Thermoguard Flame Retardant Topcoat
An oil based, decorative flame-retardant paint with 4,000+ colours used to decorate and complete Thermoguard fire protection upgrading systems. BS476 Part 7; Class 1 surface spread to flame BS476 Part 6; Fire propagation Designated Class 0 in accordance with U.K. Building Regulations Metallic colours (steel, gunmetal) available in...
Teamac Mordant Solution (T Wash)
Etching agent, formulated to enhance paint adhesion on galvanised surfaces. For new or weathered galvanising. Also applicable on weathered surfaces with some limitations. Ideal for paints that struggle with adhesion on untreated zinc.
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Tricomb Plastic Wet Film Gauges (W2008)
Ensures the quality control of the paint thickness while the coating is still wet. Applying too much coating can be expensive. Wet film measurements are also useful for coatings where the dry film thickness can only be measured destructively. More Information Delivery Info
Thermoguard Steel Fire Paint Primer
A quick drying, high build, solvent-based primer for structural steel offering exceptional corrosion resistance, maximum grip to steel and existing primers, helping to ensure good intumescent paint adhesion. Ideal for priming bare steel surfaces before the application of Thermocoat WI, Thermocoat WO and Thermocoat S intumescent paints. Also...
Thermoguard Thermocoat WO Ultimate
Water-based intumescent paint system providing fire resistance to structural steel and cast iron with a minimum number of coats. A compatible decorative overcoat system ensures the system will enhance the building’s architectural and design features. Optimised for CHS, SHS and RHS hollow sections See Thermoguard Thermocoat WI Ultimate...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...