- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 3,500+ gloss colours.
- High solids acrylic polyurethane coating.
- Meets the stringent requirements of the commercial vehicle market.
- 3-part system.
Important!
- This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener/thinner:
| 3-Pack System Details | |||||
|---|---|---|---|---|---|
| Base (Part 1) | HMG Acrythane 4G Colours | ||||
| Hardener (Part 2) | HMG Hardener 9047 | ||||
| Thinner (Part 3) | HMG Thinner 2424 | ||||
- Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Product Details
4420-829884
Data sheet
- Manufacturer
- HMG Paints Limited
- Water / Solvent Based
- Solvent
- For Use On
- Metal
- Application Method
- Gravity Gun, Suction Feed, Pressure Pot
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Three-Pack
- Pack Size
- 5L
- Mixing Ratio
- Base: 4 - Hardener: 1 - Thinner: 1.25
- Touch Dry (at 20°C)
- 30 Mins
- Dry to Handle (at 20°C)
- 1 Hour
- Dry to Recoat (at 20°C)
- After hard dry (8hrs @ 20°C) denib with p500g dry. After baking allow to cool before flatting and recoating.
- Fully Cured (at 20°C)
- 8 Hours
- Pot Life (at 20°C)
- Maximum 5 seconds increase after 30 mins.
- Coverage
- 12 - 14 square metres per litre @ 80 microns wft
- Recommended Thinner/Cleaner
- Thinner 2423 below 10°C - Thinner 2424 - Thinner 2425 above 25°C
- Density
- Acrythane 4G Colours: 1.035 g/cm³ - Acrythane 4G Colours (Contains Lead): 1.173 g/cm³
- Solids by Volume
- Acrythane 4G Colours: 59.0 % - Acrythane 4G Colours (Contains Lead): 68.6 %
- VOC
- 0.420kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Recommended Dry Film Thickness
- 50 μm
- Recommended Wet Film Thickness
- 110 μm
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Metal
- Finish
- Gloss
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Acrythane
- Colour Family
- Metallic
- Colour Family
- Orange
- Colour Family
- Beige
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- Clear
- Colour Family
- Red
- Colour Family
- Neutral
- Colour Family
- Pink
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Colour Family
- Purple
- Colour Family
- Grey
- Colour Family
- Black
- Colour Family
- Blue
- Colour Family
- White
- Colour Family
- Brown
- 1. Project Type
- Metalwork Products
- 2. Product Type
- Automotive Paints
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Automotive Paint (4G) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
HMG Thinner 2424
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. HMG Thinner 2424 is a thinner recommended for use in certain HMG systems. Designed for use with Acrythane 4G products.
In stock
HMG Hardener 9047
HMG Hardener 9047 is a hardener for use with recommeded HMG systems. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane 4G Clearcoat HMG Acrythane 4G Colours Hardener (Part 2) HMG Hardener 9047...
Price
£145.87
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery