- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
PPG Products
PPG SigmaCover 280
Universal epoxy anticorrosive primer suitable for ballast tanks, decks, topside, superstructure, hull and cargo oil tanks. Used in protective coating systems for steel and non-ferrous metals, curing at temperatures down to 5°C, and can be overcoated with most alkyd, chlorinated rubber, vinyl, epoxy and two-component polyurethane coatings....
PPG SigmaDur 550
PPG SigmaDur 550, a two-component, aliphatic acrylic polyurethane finish with excellent resistance to atmospheric exposure conditions that cures at temperatures down to -5°C (23°F). Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Can be recoated unlimited times Used on the exterior of the Padma Multipurpose...
PPG SigmaCover 435
PPG SigmaCover 435, two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating. Used as a buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions, curing at temperatures down to -10°C (14°F). A high relative humidity...
PPG SigmaFast 20
PPG SigmaFast 20 is a high-build zinc phosphate primer based on modified alkyd resin, with good anticorrosive properties under atmospheric conditions. The primer can be specified as a single coat, direct-to-metal system for ISO 12944 C1 and C2 environments. Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Fast...
PPG SigmaCover 2
SigmaCover 2, also known as Amerlock 2, a high-solids high performance self-priming low-VOC universal epoxy coating for substrates including carbon steel, concrete, masonry, galvanised steel, non-ferrous metal and stainless steel. The coating has numerous qualifications, including for nuclear service, flame spread, subsea surfaces and potable...
PPG SigmaDur 520
PPG SigmaDur 520, a two-component, high-build semi-gloss aliphatic acrylic polyurethane finish that can be recoated an unlimited amount, with excellent resistance to atmospheric exposure conditions. Available in 2,300+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Easy application by roller and airless spray - Can be recoated...
PPG Thinner 91-92
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
PPG SigmaCover 400
SigmaCover 400/Amerlock 400, a two-component, high solids, high performance self priming universal epoxy coating for steel and concrete, galvanising, stainless steel and non-ferrous metals, with low VOC. The coating has good adhesion on existing coats, compatible with prepared, damp surfaces, and has many qualifications including Nuclear...
PPG SigmaCover 456
PPG SigmaCover 456, a two-component, high-build, polyamide-cured recoatable epoxy coating available in 2,600+ colours, for steel and concrete structures exposed to atmospheric land or marine conditions, curing at temperatures down to -10°C (14°F). SigmaCover 456 can be recoated with various two-component and conventional coatings, even after...
PPG Thinner 21-06
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
PPG SigmaCover 350
SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds. Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Surface tolerant primer/coating...
PPG AquaCover 400
PPG AquaCover 400 (also known as Sigma Aquacover 400) is a two-component, polyamine-cured, waterborne epoxy coating for steel structures in atmospheric exposure, touch dry in 90 minutes. Also suitable for concrete floors. Particularly suitable when solvents are not permitted because of health and safety reasons Free from lead- and...
PPG SigmaFast 40
PPG SigmaFast 40 is a one component, high-build finish coating based on modified alkyd resin that is suitable for atmospheric exposure conditions. Fast drying with good gloss and colour retention - not suitable for immersion in water. Available in 2,300+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Suitable for atmospheric...
PPG SigmaShield 880
PPG SigmaShield 880 (also known as Amerlock 880) is a two-component, high-build, polyamine adduct-cured epoxy coating primarily designed for use in offshore splash zone maintenance such as pipelines, jetties, piling, etc. with outstanding sea water resistance that requires just a single coat that continues to cure when immersed in water....
PPG SigmaCover 456 HS
PPG SigmaCover 456 HS is two component high solids polyamide cured recoatable zinc phosphate epoxy primer/coating. This general-purpose epoxy primer/coating is available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours, for steel and concrete structures in atmospheric exposure that can be recoated with various two-component...
PPG Sigmarine 48
General purpose gloss paint in 2,600+ colours. Based on an alkyd-modified resin that is particularly suitable as a finish for boot-top, topside, deck and deck equipment. Quick-drying. Water and weather resistant coating. Can be applied over most intact alkyd paints. Order a Colour Sample
PPG SigmaGuard CSF 585
PPG SigmaGuard CSF 585 is a two-component, solvent-free, amine-cured epoxy tank coating for the storage of drinking water (approved by KIWA Holland) up to 60°C (140°F), for use with SIGMACOVER 522 primer. The coating meets NSF/ANSI Standard 61 for potable water when applied and used as described on nsf.org/ Tank coating for drinking water...
PPG SigmaTherm 540
PPG SigmaTherm 540 is a one-component, heat-resistant, moisture-curing silicone aluminum coating for protecting steel surfaces in internal and external applications. Complies with NACE SP0198 for austenitic stainless steels and carbon steels under thermal insulation. Dry heat resistance up to 600°C (1112°F) No heat cure necessary between...
PPG SigmaDur 550 H
PPG Sigmadur 550 H (formerly known as Sigmadur 568) is a two-component, high solids, high-build aliphatic acrylic polyurethane finish with excellent resistance to atmospheric exposure conditions with good colour and gloss retention, resisting splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals....
PPG Thinner 90-53
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
PPG Hi-Temp 1027
PPG Hi-Temp 1027 is a one-component, high-build heat-resistant inert multipolymeric matrix/inorganic ceramic coating designed to prevent corrosion under insulation (CUI) of carbon steel and stainless steel. Prevents external stress corrosion cracking (ESCC) of austenitic and duplex stainless steel. Complies with NACE SP0198 for austenitic...
PPG SigmaFast 205 LT
SigmaFast 205 LT, a two-component, high-build, polyamide-cured zinc phosphate epoxy primer/coating for atmospheric conditions, drying and curing at low temperatures down to –5°C (23°F). Available in 2,300+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Easy application by airless spray Recoatable with most two-component epoxy...
PPG PSX 700
PPG PSX 700 is a two-component, engineered siloxane coating that can be applied directly over inorganic zinc. Offers good resistance to splash and spillage of chemicals. Available in 2,500+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Used on Adelaide Oval Cricket Ground in Adelaide, South Australia, Rio Tinto Dampier Salt...
PPG Sigma Vikote 56
Modified acrylic finish coat for above-water areas, in 2,600+ gloss colours. Featuring good gloss and colour retention, resistance to water and splash of mild chemicals. This fast-drying coat can be applied at temperatures down to –10°C. Dries in as little as 30 minutes (@ 20°C). Apply by spray, brush or roller. Order a Colour...
PPG SteelGuard 651
A one-component, thin-film, waterborne intumescent coating for fire protection of structural steelwork. Provides up to 120 minutes protection from cellulosic fires. Suitable for C1, C2 and C3 internal environments (ISO 12944) For dry internal (C1) environments no topcoat is required Tested and assessed to EN13381-8, BS476-20/21 and...
PPG PhenGuard Subsea 780
2-component, amine adduct-cured phenolic epoxy finish, used for the protection of subsea equipment. Also known as Subsea 780 and Sigmaline 780. Qualified for NORSOK M501 Rev.6 System 7C up to 150°C with 3 coating system (Phenguard 930 / 935 / Phenguard Subsea 780 system). Qualified for NORSOK M501 Rev.6 System 7C up to 180°C with 2...
PPG SigmaFast 278
PPG SigmaFast 278, formerly known as Amercoat 278, a two-component, high solids, zinc phosphate epoxy primer and buildcoat in protective coating systems with excellent corrosion resistance in atmospheric exposure. Cures at temperatures down to -5°C (23°F) and can be overcoated with various two-pack epoxy and polyurethane coatings after 2...
PPG SigmaCover 522
PPG SigmaCover 522 is a two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating. It has excellent adhesion to, and sealing of, weathered, cleaned, zinc-rich primers and metal-sprayed steel, with good adhesion to properly pre-treated galvanized steel. Can be used in systems for atmospheric or water-immersed...
PPG SigmaZinc 19
PPG SigmaZinc 19 is a one-component, zinc-rich epoxy primer with good anti-corrosive properties, and whilst designed for repair of two-component zinc epoxy primers and zinc silicate primers, PPG SigmaZinc 19 can also be used as a reconditioner for aged, derusted and galvanised steel. Dries at temperatures down to –10°C (14°F) Dry heat...
PPG Anti-Skid Additive
PPG Anti-Skid Additive, a medium flint aggregate for use with PPG coatings to help improve grip.
PPG SigmaFast 210HS
Two-component, high solids, high-build zinc phosphate polyurethane primer/finish. Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Fast curing Specially designed for in-shop application Easy application by airless spray Unlimited recoatable Good adhesion to steel and galvanized steel Good resistance to...
PPG SigmaCover 690
PPG SigmaCover 690 is a two-component high solids aluminium pigmented polyamine cured modified epoxy primer/coating designed for maintenance. SigmaCover 690 is a self-priming coating, tolerant to lower grades of steel preparation, and is compatible with most aged, good adhering coatings. It can be recoated with epoxy and polyurethane paints,...
PPG SigmaDur ONE
Single-pack urethane polyester finish coat in 2,600+ colours for onboard maintenance on topsides, decks and superstructures. Quick drying. Pre-reacted binder, no free isocyanates added. Easy application with excellent flow and levelling properties. Recommended application is by brush and roller only. Good adhesion on most aged, sound...
Need Help?
Need Help?
PPG Protective and Marine Coatings offer a range of high quality coatings for many different environments. Not only does PPG create products that meet the relevant local and international standards, they prepare for the future by undertaking detailed research so they know the problems customers face; now and in the future.
PPG supply industries with protective paint coatings in a variety of market sectors throughout the world, spanning a diverse range of uses, including structural steel and chemical industries.
The market sectors that PPG cover include:
Infrastructure
Airports | Bridges | Recreational | Water/Wastewater facilities | Commercial buildings
Marine
New-build | Dry Dock | Inland Marine | Sea Stock | Offshore | Cargo Hold | Water Ballast Tank | Antifouling/Fouling Release
Mining
Transportation Equipment | Structural Steel | Under Insulation | Process Equipment | Pipes | Pipework | Floors and Walkways
Oil, Gas and Chemical
Structural Steel | Storage facilities | Process Equipment | Pipelines | Passive Fire Protection
Power
Power Generation | Fossil | Nuclear | Hydroelectric | Wind | Power Transmission and Distribution
Rail
Rail Cars | Rail Terminals and Support Infrastructure | Rail Tunnels | Tank Linings | Hopper Car Linings