- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 1,000+ pastel satin colours.
- Interior walls, wall cavities, ceilings, trim, doors, and related paintable surfaces.
- Ideal for bathrooms, basements, kitchens, laundry rooms, closets, locker rooms, enclosed porches and pool areas or any interior where mould and mildew is a concern.
- Water based - low odour.
- Fast drying in just 30 minutes – recoat in 4 hours.
Important!
- Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
More Features & Benefits
- High performance acrylic interior paint uniquely formulated to beautify and protect interior surfaces while preventing mould and mildew growth on the paint film.
- Produces a tough, durable, washable finish that withstands moisture and resists dirt pickup.
- Recommended for interior use on new or previously painted gypsum drywall, cured plaster, cement, poured concrete and stucco; concrete block; primed or previously painted wood and metal, paintable plastics, laminates, and other paintable surfaces.
- Durable – washable, moisture resistant finish.
- Scrubbable – Class 1 Wet Scrub Rating (ISO 11998).
- Contains a biocide that protects the dried coating against fungal degradation.
- Resists cracking, peeling and blistering for up to 7 years with normal cleaning regime.
- Independent Laboratory testing to BS3900 Part G6 - proven effective protection against many common mould and fungus
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above) for more information on:
- Technical Data
- Surface Preparation
- Application (Mould-Free Surfaces and Mould Contaminated Surfaces)
- Average Drying Times
- Health & Safety Information
- Storage
- Warranty
Limitations
- Not intended for application to floors or any surface subject to water immersion or prolonged contact with water including shower enclosures, saunas or steam rooms. Not recommended for use in HVAC duct work.
- Before applying Mould Guard to bare plaster it must first be sealed with a primer.
- Not suitable on Lime plaster or Lime renders.
- Damp surfaces: Use a waterproofing Paint for masonry prone to water intrusion. Mould Guard may be used over any quality waterproofing paint to prevent mould and mildew growth on the paint film.
- Stains: Rust, tannin, grease, mould and mildew and other stains should be blocked with the appropriate stain killing primer-sealer.
Product Details
12483-1040257
Data sheet
- Manufacturer
- Protection Paints
- Interior / Exterior Use
- Interior Use
- For Use On
- Pool Areas
Gypsum Drywall
Cured Plaster
Cement
Poured Concrete
Stucco
Concrete Block
Wood
Metal
Plastics
Laminates - For Use On
- Interior Walls
Wall Cavities
Ceilings
Trim
Doors
Bathrooms
Basements
Kitchens
Laundry Rooms
Closets
Locker Rooms
Enclosed Porches - Application Method
- Brush
Roller
Airless Spray - Single, Two or Three Pack
- Single
- Pack Size
- 2.5L
5L - Base Type
- Water-Based Acrylic
- Suitable For Use On
- Bathrooms
- Suitable For Use On
- Metal
- Suitable For Use On
- Wall Cavities
- Suitable For Use On
- Interior Walls
- Suitable For Use On
- Stucco
- Suitable For Use On
- Locker Rooms
- Suitable For Use On
- Concrete Block
- Suitable For Use On
- Cement
- Suitable For Use On
- Pool Areas
- Suitable For Use On
- Cured Plaster
- Suitable For Use On
- Kitchens
- Suitable For Use On
- Laundry Rooms
- Suitable For Use On
- Ceilings
- Suitable For Use On
- Plastic
- Suitable For Use On
- Closets
- Suitable For Use On
- Laminate
- Suitable For Use On
- Wood
- Suitable For Use On
- Enclosed Porches
- Suitable For Use On
- Poured Concrete
- Suitable For Use On
- Doors
- Suitable For Use On
- Gypsum Drywall
- Suitable For Use On
- Trims
- Application Method
- Roller
- Application Method
- Brush
- Application Method
- Airless Spray
- Manufacturer
- Protection Paints
- Usages
- Mould Resistance
- Product Usage Type
- Topcoat
- Dry to Recoat (@ 20-25°C)
- 4 hours
- Product Type
- Acrylic
- Touch Dry/Dust Free (@ 20-25°C)
- 30 mins
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Protection Paints Mould Guard is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT