- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Light grey matt.
- For fire protection of structural steelwork from cellulosic fires.
- Provides up to 180 minutes protection.
- Highly durable, epoxy intumescent coating suitable for internal and external use.
- Excellent corrosion protection suitable for:
- X environments without topcoat as per EAD 350402-00-1106
- C5 environments without topcoat as per ISO12944
- C3 environments without primer & topcoat as per ISO12944
Description
More Features & Benefits
- Application using simple 2k spray equipment, larger heated plural spray equipment or single leg airless spray equipment
- High quality finish
- No reinforcing mesh required
- Up to 3500 microns (138mils) target DFT in a single coat
- Rapid cure and fast overcoating
- Low VOC / LEED credit contributor
- Independently tested and approved in accordance to recognized national and international fire & corrosion standards including: EN13381-8; BS476; ISO12944; GB14907
- CE marked product, ETA 22/0790
- Specially formulated to protect civil and commercial infrastructure, including:
- Airport terminals
- Concert halls
- Factories
- Hospitals
- Hotels
- School buildings
- Shopping malls
- Sports stadia
- Train stations
- Warehouses
- Skyscrapers
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above) for more information on:
- Technical Data
- Recommended Substrate Conditions And Temperatures
- Instructions For Use
- Spreading rate and film thickness
- Overcoating interval for DFT up to 3500 µm
- Curing time
- Safety Precautions
- Warranty
Related Products
- Recommended thinner/cleaner: Thinner 91-92
Notes and Limitations
- The system should be dry to handle and coating thickness gauge should not to leave an indentation on the surface prior to applying subsequent coats. Drying time(s)/overcoating interval(s) may be extended at higher applied DFT’s and/or there is a change in environmental conditions
- Prior to application of a topcoat, the applicator must ensure that the specified dry film thickness has been achieved
Disclaimer
Product Details
12558-1040046
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Structural Steelwork
- Application Method
- Spray
Trowel - Single, Two or Three Pack
- Two-Pack
- Pot Life (at 20°C)
- 35 minutes
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 12 months
- Base Type
- 100% Solids
- Suitable For Use On
- Structural Steel
- Finish
- Matt
- Application Method
- Spray
- Application Method
- Trowel
- Manufacturer
- PPG
- Product Usage Type
- Intumescent Fire Protective Coating
- Product Range
- Steelguard
- Brand
- PPG
- Colour Family
- Grey
- Fire Rating
- 90 Minutes
- Fire Rating
- 120 Minutes
- Fire Rating
- 180 Minutes
- Fire Rating
- 30 Minutes
- Fire Rating
- 60 Minutes
- Classification
- CE
- Site Application
- On-Site
- Site Application
- Off-Site
- Dry to Recoat (@ 20-25°C)
- 8 hours
- Dry to Recoat (@ 20-25°C)
- 5.5 Hours
- Product Type
- Epoxy
- Product Attributes
- High Solids
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG SteelGuard 951 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like