- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 2-pack waterproof mortar for structural repair of concrete.
- For use in areas subject to early immersion and the repair of voids in marine environments.
- Portland cement based, high strength, fibre reinforced, rapid setting shrinkage compensated.
- Class R4 mortar, suitable for repair methods 3.1, 3.2, 7.1, 7.2 as defined by EN 1504-3.
More Features & Benefits
- Incorporates the latest cement chemistry, microsilica, fibre and styrene acrylic copolymer technology.
- Twin pack mortar ready for mixing.
- Generally requires no substrate or inter-layer priming.
- Thixotropic mortar for easy trowel application.
- High build, up to 50mm per layer.
- Excellent resistance to early wash-out.
- Low shrinkage and high bond ensure monolithic performance of the repair.
- Fibre reinforced for high tensile and impact strength.
- Dense matrix with low permeability to water.
- High diffusion resistance to acid gases & chloride ions.
- Non-toxic when cured.
Compliance
- UKCA & CE marked in accordance with EN 1504-3.
- BBA Approved, Certificate No. 05/4276.
- Highways Standard Series 5700 (Concrete Repairs) and CS 462 (Repair & Management of Deteriorated Concrete Structures).
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above) for more information on:
- Application Top Tips
- Application Instructions
- Preparation
- Treatment of Steel Reinforcement
- Priming of Concrete
- Mixing
- Placing
- Curing
- Cleaning and Storage
- Yield and Coverage
- Health and Safety
- Technical Data
Related Products
- Treat exposed steel reinforcement with 2 x 1mm coats of Steel Reinforcement Protector 841.
- Primer for highly-orous substrates - Polymer Admixture 850 Slurry Coat.
- Protection from strong winds - Cure-Seal WB.
Notes and Limitations
- Do not use Marine Mortar S when the temperature is below 5°C and falling.
Data sheet
- For Use By
- Professional Use
- For Use On
- Concrete
- Application Method
- Float
Trowel - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 30KG
- Minimum Applied Thickness
- 5mm
- Maximum Applied Thickness
- 50mm per layer
- Mixing Ratio
- 1:1
- Coverage
- 14 litres per 30kg.
30kg covers 0.7m² at 20mm thickness. - Max. Application Temperature
- 35°C
- Min. Application Temperature
- 5°C
- Working Time
- 60 minutes
- Suitable For Use On
- Concrete
- Application Method
- Trowel
- Manufacturer
- Flexcrete
- Usages
- Repair
- Product Usage Type
- Mortar
- Brand
- Flexcrete
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Flexcrete Marine Mortar S is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Flexcrete Steel Reinforcement Protector 841
Flexcrete Steel Reinforcement Protector 841 is a polymer modified, cementitious anti-corrosion coating for the protection of steel reinforcement. Excellent adhesion to steel ensures adequate pull-off resistance is achieved, ideal for protection of steel reinforcement subjected to long term exposure. Pre-packaged material complete with...
Flexcrete Polymer Admixture 850
Sealer and bonding agent for sand and cement mortars with excellent adhesion in dry, damp or permanently wet conditions to both concrete and steel. Can also be diluted with water to produce a primer for roof and deck applications in the clean water industry Can be mixed with cement to form a slurry for application to waterproof concrete...
Flexcrete Cure-Seal WB
Water-based curing compound and clear sealer for Flexcrete Repair and Protection Systems. Used as a curing membrane (conforms to the requirements for water retention given in ASTM C309), as a sealer coat for concrete, and as a clear lacquer which can be applied to damp but surface-dry substrates to form a tough, glossy finish. BBA Approved,...