- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Epoxy and polymer modified cementitious flooring system: 2mm.
- For waterproofing and protection of concrete floors and decks.
- High flow produces a smooth finish when applied by pouring or pumping techniques.
- Hard-wearing, durable finish offers enhanced chemical resistance.
- Suitable for trafficked areas in demanding internal and external environments.
More Features & Benefits
- Suitable for surface protection systems principles 2.2, 5.1, 6.1,8.2 as defined in BS EN 1504-2.
- Pre-packaged material only requiring mixing on site.
- Unique blend of surfactants gives high flow for fast and easy application.
- Excellent abrasion and impact resistance.
- Resists a wide range of aggressive chemicals.
- Prevents osmotic blistering on wet substrates or floors.
- Can be applied on green concrete.
- High early strength, enabling rapid opening to traffic.
- Water-based product, cures without the release of hazardous solvents. Equipment easily cleaned with water.
- Dense matrix offers low permeability to water, even at 10 bar positive and negative pressure, and very high diffusion resistance to chlorides and oxygen.
- Enhances effective cover to steel reinforcement.
- Waterproof underlayment for resin coatings and screeds, wood flooring, carpets or tiles.
- UKCA & CE marked in accordance with EN 1504-2.
- UKCA & CE marked in accordance with EN 13813 Class CT-C50-F10-AR0,5.
- Compliant with LU Standard 1-085 ‘Fire Safety Performance of Materials’.
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above) for more information on:
- Application Top Tips
- Application Instructions
- Preparation
- Priming
- Mixing
- Joints & Cracks
- Placing
- Curing
- Cleaning and Storage
- Yield and Coverage
- Health and Safety
- Technical Data
Related Products
- Any active water infiltration must first be stopped using Fastfill WP.
- Seal the substrate with Cemprotec EF Primer at a typical coverage rate of 5m²/litre to prevent out-gassing.
- Reinforce construction joints and ‘live’ cracks by embedding Cemprotec 2000-S into a local 1mm stripe coat of Cemprotec E942.
- To enhance skid and abrasion resistance, broadcast Cemprotec EF GRIT into the surface of the freshly applied coating.
- Cure-Seal WB.
Data sheet
- For Use By
- Professional Use
- For Use On
- Concrete
Concrete Floors
Concrete Decks - Application Method
- Squeegee
Pin Leveller - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 30KG
- Minimum Applied Thickness
- 2mm in 1 coat
- Mixing Ratio
- 1:1
- Coverage
- 16.2 litres per 30kg.
30kg covers 8.1m² at 2mm thickness - Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 12 months
- Working Time
- 30 minutes at 20°C
- Suitable For Use On
- Concrete
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Concrete Decks
- Application Method
- Squeegee
- Application Method
- Pin Leveller
- Manufacturer
- Flexcrete
- Usages
- Repair
- Product Usage Type
- Mortar
- Brand
- Flexcrete
- Foot Traffic
- 4-24 hours depending on temperature
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Flexcrete Cemprotec E Floor is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Flexcrete Cure-Seal WB
Water-based curing compound and clear sealer for Flexcrete Repair and Protection Systems. Used as a curing membrane (conforms to the requirements for water retention given in ASTM C309), as a sealer coat for concrete, and as a clear lacquer which can be applied to damp but surface-dry substrates to form a tough, glossy finish. BBA Approved,...
Flexcrete Fastfill WP
Rapid setting water plugging mortar for arresting water seepage and infiltration under pressure through cracks, joints, and voids in concrete and masonry. Can also be used for rapid sealing and jointing in and around pipework on water retaining structures. Ideally suited for sealing in and around pipework and for forming fillets in tanking...
Flexcrete Cemprotec 2000-S
Composite elastomeric, tear-resistant, breathable, waterproof sealing tape. Permanently elastomeric composite tape exhibiting over 600% elongation Adhered using the Flexcrete range of polymer modifiedcementitious coatings to enable simple application Impermeable to water under 10 bar hydrostatic pressure (100m head of water) WRAS...
Flexcrete Cemprotec EF Primer
Water-based, modified styrene acrylic copolymer sealer and primer that stabilises and seals cementitious and asphalt substrates, used to to stabilise and seal cementitious and asphalt floors prior to the application of Flexcrete cementitious coatings. Purpose-deigned to minimise the risk of outgassing. Single-component, material is supplied...
Flexcrete Cemprotec E942
2-pack cementitious coating for concrete and steel. For the protection of concrete and ferrous metals. Waterproof and protect concrete where enhanced chemical and abrasion resistance are required. Increases the effective concrete cover to steel reinforcement in new construction and refurbishment. Also used as a stand-alone anti-corrosion...