Follow us on:

Watco Moisture Guard

WAT12596
Watco Moisture Guard Product Description
  • For new or previously painted drywall, plaster, cement, concrete, and more.
  • For interior use where circulation is poor.
  • Touch dry in 30 minutes, recoat after 2 hours.
  • Protects against fungal degradation once dry.
  • Applied via brush or roller.

Colour
Size
Finish
£81.60(incl. VAT)
£68.00(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

Watco Moisture Guard is an exceptional water-based acrylic paint designed specifically for areas with persistent humidity, condensation, or poor air circulation. Available in a white satin finish, this product is suitable for a wide range of interior applications.



Key Features

  • Perfect for new or previously painted drywall, plaster, cement, concrete, ceramic tile, primed or previously painted wood and metal, paintable plastics, aluminium, laminates, and other paintable surfaces.
  • Dries to the touch in just 30 minutes, allowing for a second coat after 2 hours. Fully cures in 7 to 10 days, providing a durable and long-lasting finish.
  • Integrated biocide protects the dry film from fungal degradation, ensuring the painted surfaces remain clean and hygienic over time.
  • Can be easily applied with a brush or roller, making it user-friendly for both professionals and DIY enthusiasts.
  • Achieves a smooth, professional finish with minimal effort.



Application Instructions



Surface Preparation

Ensure surfaces are free from dust, dirt, and grease. Use Watco Bio-D for removing grease and oil from painted surfaces. If painting over an existing coating, abrade to remove any loose paint and ensure the remaining paint is well-bonded. Ensure the surface is completely dry before painting, with moisture content below 16%.



Painting

Mix the paint thoroughly before use. Apply with a brush or roller. The coating will dry in approximately 30 minutes. For best results, apply a second coat after 2 hours. Avoid scrubbing the new coating for seven days to allow full curing.



Post-Application Care

If applied above tiles on shower walls, avoid using the shower for up to 24 hours after application. Clean tools immediately after use with warm, soapy water.



Safety and Handling

  • Use appropriate personal protective equipment such as gloves and eye protection when handling the product.
  • Store in original containers between 4°C and 26°C, away from direct sunlight and incompatible materials. Ensure containers are tightly closed when not in use.
  • Dispose of contents and containers in accordance with local, regional, national, and international regulations.



Limitations and Restrictions

Not suitable for outdoor use. Avoid application in temperatures below 10°C or in conditions of high humidity (above 80%). Do not ingest or allow contact with eyes or skin. Avoid breathing vapour or mist.



Safety Data Summary

UN Number: Not regulated for transport.
Safety Information: Wear protective gloves and avoid breathing spray or mist. Dispose of in accordance with local regulations.
Contains Diisocyanates: No, this product does not contain Diisocyanates.
Hazard Statements: May cause an allergic skin reaction. Harmful to aquatic life with long-lasting effects.



Product Details

Data sheet

Manufacturer
Watco
Interior / Exterior Use
Interior Use
For Use On
Drywall
Concrete
Plaster
Wood
Metal
Ceramic Tiles
Bathrooms
Basements
Kitchens
Application Method
Brush
Roller
Single, Two or Three Pack
Single
Pack Size
5L
Min. Application Temperature
10°C
UN Number
N/A
Base Type
Water Based
Suitable For Use On
Plaster
Suitable For Use On
Bathrooms
Suitable For Use On
Basements
Suitable For Use On
Metal
Suitable For Use On
Wood
Suitable For Use On
Kitchens
Suitable For Use On
Drywall
Suitable For Use On
Ceramic Tiles
Suitable For Use On
Concrete
Application Method
Brush
Application Method
Roller
Manufacturer
Watco
Components
1K
Usages
Moisture Resistance
Product Usage Type
Topcoat
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Watco Moisture Guard is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT