- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
High build solvent-free two pack polyurethane. Internal and external coating and lining for metallic, cementitious, composite and GRP tanks, vessels, reservoirs, pipelines, pipe bends and random lengths, valves and fittings holding or transporting drinking water.
- Also suitable for coating and lining waste water sewage and sludge and most trade effluent tanks, vessels and bund areas.
- Approved under Regulation 31(4)(A) of the Water Supply (Water Quality) Regulations 2000.
- WRAS & DWI Approved (Grey only WRAS).
Important!
- Applies direct to steel and GRP; for concrete, seal with Acothane LV Sealer.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
More Features & Benefits
- Outstanding physical properties in terms of flexural strength, tensile strength, impact and abrasion resistance
- Certification and approvals include:
- BS6920: Part 1: 2000 “Specification” Complying with the requirements for Water Regulations Advisory Scheme tests on water quality and is suitable for use with cold water for factory and site application
- WRAS Water Fittings Directory Reference 0712527
- Meets the performance requirements of BS EN 10290
- Authorised for use under Regulation 31{4}{a} for Factory and On-Site Applications
- Applications include:
- Bund lining
- Surge vessels
- Concrete tanks
- Cooling towers
- Potable water tanks
- Reservoir roofs
- Pipeline and pipe coating
- Fuel contaminant
- Fire sprinkler tanks
- Reservoirs
- Steel and GRP tanks
- Water towers
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above) for more information on:
- Technical Data
- Surface Preparation
- Mixing
- Application Conditions
- Average Drying Times
- Application Equipment
- Health & Safety Information
- Test Data
Related Products
- Thinner No.4 - for cleaning
- Applies direct to steel and GRP; for concrete, seal with Acothane LV Sealer
Notes and Limitations
- Do not thin
- Normal application requires relative humidity below 90%
- To avoid risk of condensation, application should be done only when the temperature of the steel surface is at least 3°C (5°F) higher than the dew point
- Application at temperatures below 3°C (33°F) must be watched carefully since the possible presence of ice in the pores of the surface could result in poor adhesion and reduced corrosion protection
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel
GRP
Concrete
Tanks (Metallic, Cementitious, Composite, GRP)
Vessels
Reservoirs
Pipelines
Pipe Bends
Bund Areas
Trade Effluent Tanks
Waste Water Sewage Pipes - Application Method
- Brush
Roller
Spray - Single, Two or Three Pack
- Single
- Mixing Ratio
- 3 Base : 1 Activator by volume
- Coverage
- 1 m²/ litre @ 1000 microns
- Min. Application Temperature
- 3°C
- Shelf Life (from date of manufacture)
- 2 years
- Pot Life
- 25-30 minutes
- Base Type
- Polyurethane
- Suitable For Use On
- Tanks
- Suitable For Use On
- Tanks (Metallic)
- Suitable For Use On
- Tanks (Cementitious)
- Suitable For Use On
- Tanks (Composite)
- Suitable For Use On
- Tanks (GRP)
- Suitable For Use On
- Vessels
- Suitable For Use On
- Reservoirs
- Suitable For Use On
- Pipe Bends
- Suitable For Use On
- Valves
- Suitable For Use On
- Bund Areas
- Suitable For Use On
- Concrete
- Suitable For Use On
- Tanks (Trade Effluent)
- Suitable For Use On
- Steel
- Suitable For Use On
- Pipes (Waste Water Sewage)
- Suitable For Use On
- Resin
- Suitable For Use On
- Pipelines
- Suitable For Use On
- GRP
- Suitable For Use On
- Boats
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Acothane
- Brand
- Acothane
- Colour Family
- Cream
- Colour Family
- Grey
- Colour Family
- Blue
- Heat Resistance
- 120°C +
- Dry to Recoat (@ 20-25°C)
- 24 hours
- Seasonal
- Cold Weather
- Product Type
- Polyurethane
- Environment
- Immersion
- Touch Dry/Dust Free (@ 20-25°C)
- 30 mins
- For Tanks or Pipes
- Tank & Pipe
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Acothane DW is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT