- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- For use on ferrous and non-ferrous metals including steel structures, railings, pipes, grills.
- Machinery, trailers, tanks.
- Fills dry porous wood to stop paint peeling.
- Provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, so stopping rust.
- Added to any oil or alkyd based coatings and it will give increased wet edge time, improved flow ability, greater adhesion.
- For horizontal and vertical surfaces.
Description
More Features & Benefits
- Versatile, highly penetrating air drying oil that can be used alone or added to paint.
- Apply direct to rusted surfaces.
- Penetrates deep in to rusted surfaces to drive out moisture and air.
- Forms a solid stable layer that other paints can firmly adhere to.
- Completely seals sound underlying metal against corrosion.
- Compatible with all oil and alkyd based paints.
- Additive for all oil/alkyd based paints, stains and varnishes including urethane alkyd paints.
- Assures better adhesion of finishes.
- Eases application of finishes in difficult conditions.
- Overcoat with Oxid Vernis on rusted surfaces to maintain the rusted appearance longer.
- Heat resistant up to 175°C.
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above) for more information on:
- Technical Data
- Surface Preparation
- Application
- Maintenance
- Health & Safety Information
Related Products
- For mixing, Owatrol Oil is only compatible with oil/alkyd-based paint, stains and varnishes whose clean-up is White (Mineral) Spirits.
- Do not mix or overcoat Owatrol Oil with paints containing hot solvents e.g. Xylene, 2 Part Coatings, Chlorinated Rubber, Cellulose, etc. or with water based/acrylic paints.
- For these types of paints prime the surface with Owatrol C.I.P. or Owatrol Primer AP60.
- Do not clean with corrosive products.
Product Details
12648-1050193
Data sheet
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Ferrous Metals
Non-Ferrous Metals
Steel Structures
Railings
Pipes
Grills
Machinery
Trailers
Tanks
Wood - Application Method
- Brush
Roller
Spray - Single, Two or Three Pack
- Single
- Pack Size
- 300ml Spray
500ml
1L
5L
20L - Coverage
- 15 to 20m² per litre
- Base Type
- White Spirit
- Suitable For Use On
- Wood
- Suitable For Use On
- Ferrous Metals
- Suitable For Use On
- Non-Ferrous Metals
- Suitable For Use On
- Machinery
- Suitable For Use On
- Pipes
- Suitable For Use On
- Railings
- Suitable For Use On
- Steel Structures
- Suitable For Use On
- Tanks
- Suitable For Use On
- Grills
- Suitable For Use On
- Trailers
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Aerosol
- Manufacturer
- Owatrol
- Brand
- Owatrol
- Heat Resistance
- Up To 200°C
- Dry to Recoat (@ 20-25°C)
- 24 hours
- Product Type
- Alkyd
- Touch Dry/Dust Free (@ 20-25°C)
- 12 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Owatrol Oil Paint Conditioner & Rust Inhibitor is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT