Zinsser Allcoat Exterior Matt - Ultimate All-Surface Paint

Designed for long-term decoration and protection of exterior surfaces. With a vapour-permeable, low maintenance, water-shedding coating, it is ideal for timber, metal, masonry, plastic, concrete, cladding, and more. This high-performance paint is available in 4,400+ shades - the full range of BS4800, RAL, and NCS colours, ensuring you find the perfect match for your project.

Applications

Zinsser AllCoat Exterior Matt is suitable for various surfaces, providing a durable and attractive finish:

• Timber: Perfect for new or previously painted wood, offering excellent resistance to weathering.
• Metal: Bonds to galvanised metals and provides long-lasting protection.
• Masonry: Ideal for brick, stucco, and stone, ensuring a robust and enduring finish.
• Plastic: Adheres to uPVC (including windows and doors) and other plastic surfaces without the need for sanding.
• Concrete: Suitable for cured concrete, providing a strong and protective layer.
• Cladding: Excellent for various cladding materials, ensuring aesthetic appeal and durability.
• Composites: Ideal for updating the colour of front doors.

Please note: Matt finish products can be more susceptible to scuffs, watermarks, dirt, etc. so in areas of frequent contact/use such as windows, doors, roller shutters etc. an alternative finish may be more suited (such as Satin & Gloss). Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for further advice if in doubt.

Instructions for Use

• Ensure surfaces are clean, dry, and free from contaminants. Use a fungicidal wash or exterior house cleaner to remove mould and mildew.
• Remove all loose or peeling paint and chalky paint residue. Sand edges of remaining paint film until smooth.
  • Composite surfaces: Always ensure that the surface has been prepared sufficiently, Zinsser Universal Degreaser & Cleaner is ideal for this. As composite surfaces tend to have a wax like finish we would also advise lightly abrading the surface area. Two coats are required, the first coat acts as the primer and the second seals and protects the system.
  • Timber at risk from decay or insect attack should be treated with an appropriate preservative.
  • Bare galvanised metal: apply direct to clean, bright metal, no primer required, ensure surface is clean, dry and free from any surface contamination.
  • Bare Ferrous Metal: product contains a flash rust inhibitor so will not rust the bare metal on application, can be applied direct if the metal is completely rust free, if this is unlikely apply a dedicated anti-corrosive metal primer such as Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion prior to application of AllCoat Exterior Water Based.
• Shake or stir well before using.
• Apply with a synthetic bristle brush, roller, or airless sprayer (tip size 0.017” and pressure 2000-2500 PSI).
• Maintain a "wet edge" to avoid lapping. Do not apply if there is a likelihood of rain, frost, fog, or condensation affecting the freshly applied paint.
• Dries to touch in 1 hour. Full adhesion and hardness develop in 7 days. Apply a second coat for areas of high exposure such as sills and fascia boards.
• Clean tools immediately with warm water and liquid detergent. Avoid emptying into drains or watercourses.

Restrictions and Recommendations

Zinsser AllCoat Exterior Matt is not intended for application to exterior floors, decks, or any surface subject to water immersion or prolonged contact with water. It is recommended that unweathered or new powder coatings or stoved enamels be abraded and degreased thoroughly before applying AllCoat Exterior. Not suitable for application onto new plastisol or new powder coating; these surfaces must be fully weathered. For additional protection and preparation, consider using other Zinsser products such as Zinsser B-I-N Primer-Sealer (spot priming knots and sap streaks) and Zinsser Cover Stain (For priming new or unpainted cedar, redwood, or other resinous timbers).

Health and Safety

Zinsser AllCoat Exterior Matt contains 1,2-benzisothiazol-3(2H)-one, 2-octyl-2H-isothiazol-3-one, and a reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one. May produce an allergic reaction. Avoid breathing spray, wear protective gloves, and ensure good ventilation during application. Dispose of contents and container in accordance with all local, regional, national, and international regulations.

The product does not contain Diisocyanates.