Zinsser AllCoat Exterior - The Ultimate All-Surface Exterior Paint

The ultimate solution for all your exterior painting needs. Designed for long-term decoration, this versatile paint can be applied to a variety of surfaces including wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, and cured concrete. Its advanced formula ensures a durable, vapour-permeable, water-shedding coating that is easy to apply and maintain. This product is not suitable for application on floors.

Performance and Benefits

• 4,400+ colours - including RAL 7016 Anthracite Grey and Chartwell Green.
• Recommended for use on uPVC - read our blog post on painting uPVC doors and windows, or click here for commonly asked questions about painting uPVC.
• Multi-Surface Application: Ideal for timber, metal, masonry, cladding, composite, plastic, concrete, cladding, weathered bitumen, stucco, brick, stone and more.
• Durability: Provides excellent resistance to rain, severe weather, cracking, blistering, and flaking.
• Quick Recoat Time: Dries to recoat in just one hour, allowing for efficient project completion.
• Biocide Protection: Contains biocide to protect the dried coating against fungal degradation.
• Colour Retention: Offers superb colour retention, keeping exteriors looking fresh and vibrant for up to 15 years.
• Easy Application: Self-priming formula bonds to existing glossy paints without sanding.

Application Instructions

Before applying Zinsser AllCoat Exterior, ensure surfaces are clean, dry, and free of any contaminants that might interfere with adhesion. Remove loose or peeling paint and sand the edges of any remaining paint film until smooth. For new or unpainted surfaces, especially concrete or masonry, ensure they are cured for at least 30 days before priming. Remove all existing mould and mildew with an appropriate cleaner.

Shake or stir the paint well before use. Apply with a synthetic bristle brush, roller, or sprayer. For airless spraying, use a .017” tip and high-medium pressure (2000-2500 PSI). Maintain a “wet edge” to avoid lapping and avoid painting in direct sunlight or adverse weather conditions. The paint dries to touch in 1 hour and achieves full cure in 7 days.

Usage Limitations

• Not intended for application to exterior floors, decks, or any surfaces subject to water immersion or prolonged contact with water.
• Special precautions should be taken during the surface preparation of pre-1960 paint surfaces as they may contain harmful lead.

Storage and Cleanup

Store Zinsser AllCoat Exterior indoors between 5°C and 25°C, away from frost. Clean application tools immediately after use with warm water and liquid detergent, and rinse with water. For dried paint on brushes, use Zinsser BIN Brush Cleaner.

Health and Safety

Contains 2-octyl-2H-isothiazol-3-one and Reaction mass of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1), which may produce an allergic reaction. In case of contact with eyes or skin, rinse immediately with plenty of water and seek medical advice if necessary. Dispose of contents and container in accordance with all local, regional, national, and international regulations.

Contains no Diisocyanates. This product is not classified as hazardous under Regulation (EC) No. 1272/2008. For further details, refer to the downloadable Safety Data Sheet.