- Reduced price
- New
- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Hardener 9058 Standard is a polyamide hardener for use as a standard in recommended HMG systems.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
2-Pack System Details | |||||
---|---|---|---|---|---|
Base (Part 1) | HMG Epiprime | ||||
Activator (Part 2) | HMG Hardener 9058 Standard |
- Part two of a two part system
- Designed for use with HMG Epiprime
HMG Hardener 9058 Standard is a polyamide hardener for use as a standard in recommended HMG systems.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Epiprime.
Click To Jump To Section:
Features & Benefits
- Part two of a two part system
- Designed for use with HMG Epiprime
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Hardener 9058 Standard | ||||||
Volume Solids: | - | |||||
VOC Content: | 0.545kgs/ltr | |||||
SG: | - | |||||
Viscosity - Kinematic: | Not determined | |||||
Density: | Not determined | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Flash Point: | 25°C |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Hardener 9058 Standard | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 137°C | |||||
Flash Point: | 25°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 500°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 1.1 Vol % | |||||
Explosion limits: Upper: | 7.0 Vol % | |||||
Vapour pressure at 20°C: | 6.7 hPa | |||||
Density at 20°C: | Not determined | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | NOT MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | Not determined | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 62.5% | |||||
Solvent content: | - |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
Data sheet
- Manufacturer
- HMG Paints Limited
- Single, Two or Three Pack
- Single
- Parts
- Single part pack
- Base Type
- Polyamide
- Density
- Not determined
- VOC
- 0.545kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- UN Number
- 1263
- Base Type
- Polyamide
- Product Usage Type
- Hardener
- Categorised As
- Accessories > Hardeners & Activators
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
CLEARANCE - HMG Hardener 9058 Standard - 1L is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT