- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Available in white.
- Non-skid additive for floor coatings.
- For concrete, wood, and metal surfaces.
- Professional use only.
Rust-Oleum Non-Skid Additive NS 200 - White Multi-Surface Additive
Enhance the safety and durability of your floor coatings with Rust-Oleum Non-Skid Additive NS 200. Designed for professional and industrial applications, this additive ensures a non-slip surface, perfect for areas prone to wet or slippery conditions. Whether applied to concrete, wood, or metal surfaces, it provides superior grip and longevity.
Application and Usage
The non-skid additive is suitable for a variety of surfaces including:
- Concrete
- Wood
- Metal
To achieve the best results, ensure the surface is clean and dry before application. Mix the additive thoroughly with the floor coating material as per the instructions on the data sheet. Apply using a roller or brush, and allow adequate drying time to achieve optimal non-slip properties.
Restrictions and Limitations
Please note the following restrictions and limitations for this product:
- Not suitable for consumer use.
- Do not apply to surfaces that are not properly prepared or cleaned.
- Do not mix with non-compatible substances or coatings.
- Always refer to the data sheet for detailed application instructions and safety information.
Additional Recommendations
For enhanced performance and safety, consider using our range of floor coating products compatible with this non-skid additive. Always refer to the downloadable data sheet for comprehensive application guidelines and safety precautions.
Health and Safety
Ensure to handle this product with care. Always use appropriate protective equipment when handling the product.
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Professional Use
- Application Method
- Brush
Roller - Pack Size
- 15KG
- Density
- 2.3g/cm³
- Solids by Volume
- 100 %
- Shelf Life (from date of manufacture)
- 5 years
- Usages
- Anti-Slip
- Product Usage Type
- Additive
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum Non-Skid Additive NS 200 1kg is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum 9700 Coldmax Rapid (Standard)
We no longer stock this product, but can recommend Watco Cold Set Coating as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
Rust-Oleum 5800 Epoxy Rapid WB
Glossy grey finish. Rapid curing, water-based epoxy floor paint. For garages, warehouses, showrooms, corridors, indoor car parks, and workshops. Recoatable after just 3 hours. Excellent flow, low-odour. For professional use.
Rust-Oleum 5500 Solvent Free Epoxy
Available in various shades of white and grey. For concrete, masonry, and blasted steel surfaces. Resistant to frequent chemical cleaning and high humidity. Solvent-free. Protects against oils and solvents. Professional use only.
Rust-Oleum 9100 Winter Grade Epoxy
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Rust-Oleum Mathys Pegakote
Available in a wide range of colours. Satin finish. Two-component epoxy floor paint. For garages, warehouses, showrooms, corridors, indoor car parks, and workshops. Superior abrasion resistance. Pot life of 2 hours and full curing in 5-7 days.
Rust-Oleum 9100 High Performance Epoxy
We no longer stock this product, but can recommend Rust-Oleum 9100 High Solids Epoxy or Rust-Oleum 9100 Winter Grade Epoxy as a great alternatives.
Rust-Oleum 9600 Rust-O-Thane Polyurethane
We no longer stock this product, but can recommend Jotun Hardtop XP as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option...
Rust-Oleum 9100 High Solids Epoxy
4,100+ Colours. Two-pack high-build, glossy epoxy, resistant to corrosion and chemicals. Applied directly on metal or concrete surfaces. Superior protection against solvents, chemicals, abrasion, and impact. Two-year rustproof guarantee. Professional use only.