- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Two-pack amine-cured pure epoxy coating offering surface tolerance, fast drying, and high build. Available in aluminium red-toned and off-white.
- Applicable on carbon steel, galvanised steel, stainless steel, aluminium, wood, and composite surfaces.
- Designed for atmospheric and immersed environments, including ballast tanks and underwater areas.
- Highly abrasion-resistant and suitable for application at sub-zero temperatures.
- Approved for PSPC for Water Ballast Tanks (IMO Res. MSC 215(82)).
- For industrial and professional use only.
Description
Jotun MegaCote Epoxy Coating
This two-pack amine-cured pure epoxy coating delivers outstanding corrosion resistance for both atmospheric and immersed environments. Its surface-tolerant formulation makes it ideal for use on various substrates, including carbon steel, galvanised steel, stainless steel, aluminium, and wood. With high solids content and a fast-drying time, it provides efficient and long-lasting protection even at sub-zero application temperatures.
Where It Can Be Used
This epoxy coating is versatile and suitable for numerous applications:
- Water ballast tanks (PSPC approved for IMO Res. MSC 215(82))
- Hulls (above and below waterline)
- Superstructures and decks
- Osmosis prevention on composite hulls
- Structural steel, aluminium, and wood components
Application Guidelines
For optimal results, ensure proper surface preparation according to ISO standards:
- Carbon Steel: Minimum St 2; recommended Sa 2½ (ISO 8501-1)
- Galvanised Steel: Surface should be clean, dry, and have a rough profile
- Stainless Steel: Abrade with non-metallic abrasives
- Aluminium and Wood: Clean and dry surfaces with mechanical abrasion
Refer to the Technical Data Sheet for detailed preparation and mixing instructions.
Recommended Products and Compatibility
This coating pairs well with various primers and topcoats:
- Compatible Primers: Inorganic zinc silicate shop primers, epoxy primers
- Topcoats: Polyurethane, polysiloxane, and vinyl epoxy coatings
Use Jotun Thinner No. 17 for thinning and cleaning purposes.
Restrictions and Limitations
Not suitable for use on unprepared, oily, or wet surfaces. Avoid application in high-wind conditions or when the substrate temperature is below 3°C above the dew point.
Always consult the Technical Data Sheet and Safety Data Sheet for full application and safety information.
Health and Safety
UN Number: 1263. Contains xylene and other hazardous substances. Classified as flammable and harmful to aquatic life. Use appropriate PPE, including gloves, eye protection, and respiratory masks. Ensure good ventilation during application. Contains diisocyanates; professional use only. Avoid contact with skin and eyes.
For detailed safety instructions, refer to the Safety Data Sheets.
Product Details
13056-1060489
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Carbon Steel
Galvanised Steel
Shop-Primed Steel
Stainless Steel
Aluminium
Composite
Wood - Application Method
- Spray
Brush
Roller - Colour
- Off-White
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4L (3+1)
18L (13.5+4.5L) - Pot Life (at 20°C)
- 1.5 hours
- Coverage
- 9.6 m²/litre at 75 µm DFT
- Min. Application Temperature
- (-5°C)
- Shelf Life (from date of manufacture)
- Comp A: 48 months at 23 °C
Comp B: 24 months at 23 °C - UN Number (Activator)
- UN1866
- UN Number (Base)
- UN1263
- Pot Life
- 1.5 hours at 23 °C
- Walk-on Time
- 10 hours at 23 °C
- Base Type
- Amine-Cured Epoxy
- Suitable For Use On
- Composite
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Wood
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Carbon Steel
- Suitable For Use On
- Shop Primed Steel
- Finish
- Semi Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Jotun
- Product Range
- Jotun Yachting
- Brand
- Jotun
- Colour Family
- Off-White
- Colour Family
- Aluminium
- Heat Resistance
- Up to 120°C
- Dry to Recoat (@ 20-25°C)
- 7 hours
- Non - Isocyanate
- Isocyanate Free/Non-Isocyanate
- Product Type
- Epoxy
- Environment
- Atmospheric
- Environment
- Low Temperature
- Environment
- Immersion
- Touch Dry/Dust Free (@ 20-25°C)
- 5 hours
- Product Attributes
- High Build
- Product Attributes
- High Solids
- Product Attributes
- Surface Tolerant
- For Tanks or Pipes
- Tank
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun MegaCote is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
