Hi there. I have purchased your Haedtop Flexi kit,1A,and I would like to know if it is spray paintable?Is the viscosity thin enough to use without thinning?Thanking you for your time. Regards, Rogan.

This product can be sprayed without thinning with the correct equipment. For airless spray application nozzle/tip size should be 15 to 21 inch/1000 at 150 bar. For conventional spray application with a HVLP spray gun 13-21 inch/1000 at 2.4bar. Preparation and application information are in the Technical data sheet, this can be found in the data sheets tab on the product page linked below. Jotun Hardtop Flexi.

Jotun Hardtop Flexi

Reference JOT1329

Brand Jotun

Search ID JOT1329

Jotun Hardtop Flexi is a high solids (64% volume) polyurethane topcoat with excellent wetting and adhesion properties. Hardtop Flexi has a remarkable ability to resist impact and will maintain initial gloss level over extended periods.

This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.

Can be applied in thick coats
Great adhesion to most primers and substrates
Direct to metal application
Contains anti-corrosive pigments
Very good abrasion resistance
Good chemical resistance
Excellent flexibility
Available in hundreds of RAL, NCS, BS and Jotun Colours - 1,100+ new colours just added!

Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Order a Colour Sample

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

Finish

£81.30(incl. VAT)

£67.75(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

1 question about the product

Description

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Low VOCs, application of single coats up to 150 microns and fast drying add to the features of Hardtop Flexi. This is one of the few products that contain anti-corrosive pigments for the best direct to metal performance.

Jotun Hardtop Flexi is a two-pack, high solid, flexible polyurethane coating with good gloss and colour retention. Jotun Hardtop Flexi can be used as a single coat system in atmospheric corrosivity classes C2 and C3. Can also be used as a topcoat in classes C2 - C4 and C5-I and C5-M on various primers and as maintenance coating on old paint surfaces.

Jotun Hardtop Flexi has a good impact resistance and painted objects can be stacked after short drying time. The product have built in good corrosion protection and is also suitable as a single product system for maintenance application when both corrosion protection and topcoat performance are desired.

Product Information

Can be applied in thick coats
Great adhesion to most primers and substrates
Direct to metal application
Contains anti-corrosive pigments
Very good abrasion resistance
Good chemical resistance
Excellent flexibility

Features & Benefits

Stress- and impact resistant
Direct-to-metal (DTM) protective properties
High build

Primers

Hardtop Flexi will form a long lasting corrosion protection system together with primers like Barrier, Resist, Jotamastic, Penguard and Jotacote for a wide range of purposes.

Flexibility

A hybrid speciality binder ensures excellent flexibility, which enables the product to withstand stress and impact.

Direct-to-metal

Hardtop Flexi can be used as a one coat direct-to-metal product in atmospheric corrosivity classes C2 and C3 (acc. ISO 12944), due to a combination of anticorrosive pigments.

High build

A maximum DFT of 150 microns will enable you to achieve a better protection than with conventional polyurethanes.

Approvals & Certificates

Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 - System M20, M21, M24, N2 and N4 (Cert. No's. XM92-162, XM92/M21-115, XM92/M24-122, XM92/M24-123, XN90/N2-064, XN90-084) Item 7.3.1.
NORSOK pre-qualification - Hardtop Flexi is pre-qualified in several NORSOK coating systems no. 1.

Product Details

Reference 1329-962869

Data sheet

Manufacturer: Jotun
For Use By: Professional Use
For Use On: Stainless Steel, Galvanized Steel, Aluminium
Application Method: Brush, Roller, Spray
Sheen: Gloss
Colour: Fully Tintable
Single, Two or Three Pack: Two-Pack
Pack Size: 5L, 20L
Application: Brush, Roller, Spray
Touch Dry (at 20°C): 90 Mins
Coverage: 4.3 to 13m²/l
Touch Dry: 2 Hours
UN Number (Activator): UN1263
UN Number (Base): UN1866
Base Type: Solvent-Based
Suitable For Use On: Carbon Steel
Suitable For Use On: Coated Surfaces
Suitable For Use On: Bridges
Suitable For Use On: Atmospheric Environments
Suitable For Use On: Industrial Structures
Suitable For Use On: Offshore Environments
Suitable For Use On: Refineries
Suitable For Use On: Power Plants
Suitable For Use On: Buildings
Suitable For Use On: Topside
Suitable For Use On: Deck
Suitable For Use On: Concrete
Suitable For Use On: Superstructure
Suitable For Use On: Aluminium
Suitable For Use On: Direct To Metal
Suitable For Use On: Stainless Steel
Suitable For Use On: Compatible Existing Coatings
Suitable For Use On: Steel
Suitable For Use On: Galvanised Steel
Finish: Gloss
Application Method: Roller
Application Method: Spray
Application Method: Brush
Usages: High Solids
Usages: High Build
Usages: Flexible
Usages: Atmospheric
Usages: Gloss Retention
Usages: Impact Resistance
Usages: Direct to Metal
Product Usage Type: Topcoat
Product Range: Hardtop
Colour Family: Blue
Colour Family: Red
Colour Family: Brown
Colour Family: Pink
Colour Family: Orange
Colour Family: Purple
Colour Family: Yellow
Colour Family: Off-White
Colour Family: Black
Colour Family: Magnolia
Colour Family: White
Colour Family: Neutral
Colour Family: Anthracite Grey
Colour Family: Cream
Colour Family: Beige
Colour Family: Grey
Colour Family: Green
Product Type: Acrylic Polyurethane
Environment: Atmospheric
Touch Dry/Dust Free (@ 20-25°C): 90 mins
Product Attributes: High Solids
Product Attributes: Gloss Retention
Product Attributes: Flexible
Product Attributes: High Build
Resistance to: Impact

Attachments

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Rogan Brown on 2022-04-08 02:35:52	Question: Hi there. I have purchased your Haedtop Flexi kit,1A,and I would like to know if it is spray paintable?Is the viscosity thin enough to use without thinning?Thanking you for your time. Regards, Rogan.
	Answer from Rawlins’ Technical Team: This product can be sprayed without thinning with the correct equipment. For airless spray application nozzle/tip size should be 15 to 21 inch/1000 at 150 bar. For conventional spray application with a HVLP spray gun 13-21 inch/1000 at 2.4bar. Preparation and application information are in the Technical data sheet, this can be found in the data sheets tab on the product page linked below. Jotun Hardtop Flexi.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Jotun Hardtop Flexi is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

£25.93 (incl. VAT)

Shop now

In Stock and Available for Delivery

COVERAGE CALCULATOR
Units
Film Thickness
Total area²
Or enter length and width dimensions:
Length
Width

Follow us on:

Jotun Hardtop Flexi

Jotun Hardtop Flexi

Product customisation

Your customization: Chosen Colour: Jotun Standard - 0001 White

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Surface Preparation Kits for Steel