- Reduced price
- New
- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 2-component, solvent-free epoxy resin for moisture control.
- Can be used on concrete, mortar, screed, swimming pools, balconies, and tanking applications.
- Absorbs moisture from wet substrates and reduces waiting times for construction projects.
- Resistant to positive and negative pressure up to 10 bars (refer to test certification).
- Compatible with UltraFlex liquid waterproofing systems.
- Certified for professional and industrial use – not suitable for consumer application.
Important!
- An air purifying respirator is required when spraying or handling
Description
Advanced Epoxy Moisture Barrier
Ultra Dry is a low-viscosity, two-component epoxy resin designed to manage moisture in damp substrates such as concrete, mortar, and screed. This solvent-free formulation acts as an efficient moisture control system, allowing for fast-track installations without compromising structural integrity.
Where Can Ultra Dry Be Used?
Suitable for application in environments where moisture retention can delay projects, Ultra Dry is ideal for:
- Concrete and mortar surfaces with high residual moisture.
- Green mortar applications requiring vapour barrier protection.
- Swimming pools, balconies, and lift shafts exposed to constant humidity.
- Roofing systems needing an effective damp-proof primer.
Why Choose Ultra Dry?
Engineered for high-performance waterproofing, Ultra Dry delivers:
- Retention of up to 98% residual moisture, preventing future substrate issues.
- Exceptional adhesion to porous substrates including ceramic tiles, mortars, and concrete.
- Seamless application in a single coat using a roller or notched trowel.
- Fast-drying formulation with a pot life of one hour for efficient installation.
- Resistant to high humidity conditions, ensuring long-term performance.
Application Instructions
Ultra Dry must be applied to a clean, dust-free, and structurally sound substrate. Remove any superficial water and non-humidity resistant coatings before application.
Mix Component B into Component A using a slow-speed paddle mixer until a uniform consistency is achieved. Apply evenly using a roller or notched trowel.
- For moisture blocking: Apply approximately 500 g/m².
- For surface moisture absorption: Apply approximately 200 g/m².
- If tiling over Ultra Dry, scatter silica or kiln-dried sand while the product is still tacky.
Restrictions and Limitations
Ultra Dry should not be applied to structural joints. Ensure ambient temperatures are between +2°C and +35°C for optimal curing. Do not dilute the product.
Health and Safety
Ultra Dry is classified as hazardous under CLP regulations:
- UN 3082 – Environmentally hazardous substance (Component A).
- UN 2735 – Corrosive liquid, containing amines (Component B).
- Contains epoxy resin – may cause allergic reactions.
- Use protective gloves, clothing, and eye protection during application.
- Refer to the downloadable safety data sheet for full handling and disposal guidelines.
Product Details
13305-1062798
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete
Mortar
Screed
Ceramic Tiles - Application Method
- Roller
Trowel - Colour
- Grey
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG
15KG - Pot Life (at 20°C)
- 1 hour
- Coverage
- 200 to 500 g/m²
- Min. Application Temperature
- 2°C
- Shelf Life (from date of manufacture)
- 12 months
- UN Number (Activator)
- UN 2735
- UN Number (Base)
- UN 3082
- Pot Life
- 1 hour
- Base Type
- Epoxy Resin
- Suitable For Use On
- Concrete
- Suitable For Use On
- Mortar
- Suitable For Use On
- Ceramic
- Suitable For Use On
- Screed
- Application Method
- Roller
- Application Method
- Trowel
- Manufacturer
- Eagle
- Brand
- Eagle
- Colour Family
- Grey
- Site Application
- On-Site
- Dry to Recoat (@ 20-25°C)
- 2 hours
- Product Type
- Epoxy
- Environment
- Immersion
- For Tanks or Pipes
- Tank & Pipe
- Roof Type
- Flat
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Eagle Ultra Dry Epoxy Resin is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT