Follow us on:

Jotun Steelmaster 1200WF
Jotun Steelmaster 1200WF

Jotun Steelmaster 1200WF

25780
JOT1353

One component waterborne acrylic thin film intumescent coating independently tested and approved for fire protection of structural steel exposed to cellulosic fire up to 180 minutes. Suitable for properly prepared carbon steel substrates.

Please Note: We strongly recommend Tricomb Plastic Wet Film Gauges are used to help ensure correct film thicknesses are achieved during application

Colour
Size
£272.54(incl. VAT)
£227.12(ex. VAT)
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

questions 9 questions about the product
Description

Jotun Steelmaster 1200WF is specially designed as passive fire protection for steel constructions. To be used as part of a complete system for interior environments up to C3.

Approvals and certificates

  • BS 476 part 20/21
  • ASTM E84

Additional certificates and approvals may be available on request.

Features & Benefits

  • Low thickness required
  • HAPS free, green product
  • Increases productivity
  • Ready to use, easy airless spray application
  • Quicker project completion
  • Low VOC, low environmental impact
  • Safe for multiple trades
  • Tested to BS 476 (20 and 21)

Ready to use, ease of application

Steelmaster 1200WF is applied using airless spray, roller and brush for touchup only. For the full guidance notes download the Steelmaster 1200WF application guide.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Product Details
1353-296793

Data sheet

For Use By
Professional Use
Interior / Exterior Use
Interior & Exterior
Single, Two or Three Pack
Single
Application
Brush, Spray
Touch Dry
6 hours
Base Type
Water-Based
Suitable For Use On
Steel
Application Method
Brush
Application Method
Spray
Product Usage Type
Basecoat
Product Range
Steelmaster
Colour Family
White
Fire Rating
30 Minutes
Fire Rating
60 Minutes
Fire Rating
90 Minutes
Fire Rating
120 Minutes
Site Application
On-Site
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)
questions Michael Pakey on 2024-05-21 16:35:16
Question: 

What size airless pump will I need for Jutun1200 intumescent I got a 40-1 pump but it won't pump it thanks Mick at Gamart Eng

Answer from Rawlins’ Technical Team:

This product can be applied via airless spray with a nozzle tip of 19-23, and pressure at nozzle a minimum of 200 bar/2900 psi.

questions Sayed on 2021-09-08 11:21:25
Question: 

Can this paint use for galvanised steel ?

Answer from Rawlins’ Technical Team:

Assuming the galvanised steel is prepared as detailed in the technical data sheet and the appropriate primer is used yes it can be.

questions anand on 2021-02-19 08:18:02
Question: 

How many liters is the can?. also roughly what is the ideal coverage liters/m2?

Answer from Rawlins’ Technical Team:

This product comes in 18.5ltr tins, there is not a set coverage rate for intumescents, depending on the steels and level of fire protection required this will vary.

We can assist you with a specification for the project and have contacted you directly for more information.

questions Tom Goring on 2020-05-14 11:12:52
Question: 

Hi, Is this product clear ? We need 30min fire protection on some galvanised steel beams would it be suitable? Thanks

Answer from Rawlins’ Technical Team:

This product is white, please contact our Technical team on 0113 2455450 option 2 and we can assist you with a specification for the project.

questions JULIE ARNOLD on 2019-06-18 15:46:05
Question: 

How much paint will I need to purchase to cover 2 x 150x90 PFC steel beams - 3585 long?

Answer from Rawlins’ Technical Team:

In addition to the information you have provided we would also need to know;

  • Level of fire protection required (i.e. 30, 60, 90min, etc.)
  • Orientation (horizontal or vertical)
  • Number of sides to be painted (all sides, 3 sides, 1 flange, etc.)
  • Environment (internal, external, car park, chemical exposure, etc.)
  • Application on site or in shop
questions Musfiqul Azad on 2019-06-01 14:33:25
Question: 

Is that product certified by any third party ? if Yes, please mention the name of certification body.

Answer from Rawlins’ Technical Team:

Yes, this product has a Certifire Certificate of Approval No CF 5243.

questions BURCH on 2019-03-10 12:46:27
Question: 

Can this material be applied by brush.

Answer from Rawlins’ Technical Team:

Application by brush is only recommended for stripe coating and small areas, care must be taken to achieve the specified dry film thickness.

questions Peter Richardson on 2019-01-15 22:09:25
Question: 

Hello We have exposed steel rsjs in our new extension which we have built. We wpuld lile to paint them black to tie in with other structures. We know we have to paint them with intumesant paint but would lile some advice on which one and whether it is possible to apply a top coat of black. Whether that be a ajoining product by yourselves or some other. Also as the structure is in place is it possble to brush the coats on? Many thanks Peter Richardson

Answer from Rawlins’ Technical Team:

Thank you for your enquiry, please provide us with as much of the following information as possible;

  • Level of fire protection required (i.e. 30, 60, 90min, etc.)
  • Each steel section dimension (i.e. 254x146x37 UB)
  • Quantity and length of each section (or overall meterage for each section)
  • Orientation (horizontal or vertical)
  • Number of sides to be painted (all sides, 3 sides, 1 flange, etc.)
  • Environment (internal, external, car park, chemical exposure, etc.)
  • Application on site or in shop

Alternatively you can just forward us drawings, fabrication/cutting lists and we'll extract the information from them but in that instance we'd need some guidance as to what to allow for i.e. all steels on first floor, etc.

questions Colin McArdle on 2018-10-30 20:54:19
Question: 

Do we need training by your company before we use 60 mins intumescent paint all are painters have nvq qualified,

Answer from Rawlins’ Technical Team:

Jotun don't state a requirement for any specific training but do advise the applicator should be skilled and competent to apply the product.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Jotun Steelmaster 1200WF is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
Tricomb Plastic Wet Film Gauges (W2008)

Tricomb Plastic Wet Film Gauges (W2008)

Ensures the quality control of the paint thickness while the coating is still wet. Applying too much coating can be expensive. Wet film measurements are also useful for coatings where the dry film thickness can only be measured destructively. More Information Delivery Info

Price £0.28 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Hand & Power Tool Surface Preparation Kits for Steel

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.93 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery