- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Anti-Skid Aggregate is aluminium oxide grains, designed to be spread into the last coat in a non-skid system. Available in extra coarse, coarse, medium and fine particle sizes. Suitable as anti-skid material in a wide range of coating systems in atmospheric environments. Suitable on any type of surface, depending on the specific coating system.
Jotun Anti-Skid Aggregate is aluminium oxide grains, designed to be spread into the last coat in a non-skid system. Available in extra coarse, coarse, medium and fine particle sizes. Suitable as anti-skid material in a wide range of coating systems in atmospheric environments. Suitable on any type of surface, depending on the specific coating system.
Jotun Anti-Skid Aggregate can be used on helidecks, walkways, ramps, weigh bridge decks, decks in general where non-slip properties are required. The spreading is to take place in the wet film during application.
Grade | Size |
Fine | 180-250 microns |
Medium | 400-600 microns |
Coarse | 700-1000 microns |
Extra Coarse | 1200-1600 microns |
Data sheet
- Manufacturer
- Jotun
- Single, Two or Three Pack
- Single
- Pack Size
- 3KG
- Shelf Life (from date of manufacture)
- 48 month(s)
- UN Number
- Not regulated
- Categorised As
- Accessories > Aggregates
Questions
Question about the product
Luke on 2023-05-15 09:20:15 | Question:
Hi can this be used with a glue (epoxy resin) to achieve a sand paper like surface? |
Answer from Rawlins’ Technical Team:
Jotun Anti-Skid Aggregate is aluminium oxide grains, designed to be spread into the last coat in a non-skid system. | |
Navin Singh on 2022-08-17 13:20:14 | Question:
How much paint is required for 1 sq. m area |
Answer from Rawlins’ Technical Team:
This is not a paint, it is an aggregate that should be used with a suitable floor paint such as Jotun's Jotafloor range. Jotafloor Non Slip Aggregate is cast on to the wet first coat of the Jotafloor material until the whole surface is Distribute the product from a container eg. distribution sieve, that will allow the aggregate to fall Once the first coat has dried, remove the excess aggregate from the surface by vacuum or sweeping. The aggregate can be reused if clean. Apply the final coat of Jotafloor material to the desired thickness. | |
anthony teagles on 2019-01-29 18:30:34 | Question:
Need to recover a floor in a refrigerator trailer that get loaded and unloaded by electric pallet truck Is this product suitable and how could I cover the floor Area is 13 meter by 2,5 meter |
Answer from Rawlins’ Technical Team:
We would instead recommend Smartkote Safekote, for 32.5m² you would require 17 - 22 litres to apply the recommended 2 coats. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Anti-Skid Aggregate is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT