- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Sikagard 552 W Aquaprimer is one component water dispersed adhesion promoting primer for water dispersed polymer paint coatings.
It is part of a system that complies with the requirements of EN 1504-2 as protective coating:
- Priming coat for concrete and dense mineral substrates like fibre cement, aerated concrete, gypsum and smoothing coating such as Sika MonoTop 610, etc.
- Sikagard 552 W Aquaprimer can also be used as a primer on firmly adhering existing water based coatings.
Features and Benefits
- Water dispersed - solvent free
- Environmentally friendly
- Water vapour permeable
- Can be used as an adhesion promoter
Sikagard 552 W Aquaprimer is one component water dispersed adhesion promoting primer for water dispersed polymer paint coatings. Sikagard 552 W Aquaprimer is part of a system that complies with the requirements of EN 1504-2 as protective coating.
Uses
- Priming coat for concrete and dense mineral substrates like fibre cement, aerated concrete, gypsum and smoothing coating such as Sika MonoTop 610, etc.
- Sikagard 552 W Aquaprimer can also be used as a primer on firmly adhering existing water based coatings.
Sikagard 552 W Aquaprimer is part of the system:
- Suitable for protection against ingress (Principle 1, method 1.3 of EN 1504-9)
- Suitable for moisture control (Principle 2, method 2.2 of EN 1504-9)
- Suitable for increasing the resistivity (Principle 8, method 8.3 of EN 1504-9)
Features & Benefits
- Water dispersed - solvent free
- Environmentally friendly
- Water vapour permeable
- Can be used as an adhesion promoter
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Data sheet
- Manufacturer
- Sika
- For Use By
- Professional Use
- Water / Solvent Based
- Water
- For Use On
- Concrete
Cement
Gypsum
Render - Application Method
- Brush
Roller
Airless Spray - Colour
- Clear
- Pack Size
- 10L
- Coverage
- 0.10 - 0.12 kg per m²
- Min. Application Temperature
- 8°C
- Touch Dry
- 5 hours
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Render
- Suitable For Use On
- Cement
- Suitable For Use On
- Gypsum
- Application Method
- Roller
- Application Method
- Airless Spray
- Application Method
- Brush
- Manufacturer
- Sika
- Components
- 1K
- Usages
- Concrete Surface Protection
- Product Usage Type
- Primer
- Product Range
- Sikagard
- Colour Family
- Clear
- Categorised As
- Masonry Primers
Questions
Question about the product
Patrick on 2023-04-08 09:17:44 | Question:
Can I use sika guard 552 on a plaster sand and cement walls exterior. .Used as a primer and sealer . The walls will be highly exposed to wind and driving rain. |
Answer from Rawlins’ Technical Team:
Essentially yes but with a few caveats. Normal surface preparation must be complied with as detailed in the technical data sheet, it would not be suitable for sealing a loose surface texture/laitance. Sikagard 552 W Aquaprimer must be over coated, we would recommend Sikagard 675 W ElastoColor. If no requirement for overcoating and original finish is preferred then Sikagard 680 S Betoncolor Clear Glaze may be better suited. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sikagard 552 W Aquaprimer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT