- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A transparent surface hardener, dustproofer, sealing and curing compound for concrete. From the Sikafloor range, this is suitable for interior or exterior applications.
- Ready to use.
- Easy to apply.
- Improved chemical and abrasion resistance compared to untreated concrete.
- Reduced dusting of concrete floors.
- Reduced loss of water of new concrete while setting.
- Improves cleanability.
- Non-yellowing.
- Good penetration.
- Solvent free.
- Colourless and odourless.
- Environmentally friendly.
Please Note: 200L pack size is available on a 14-21 Working Days delivery option only
Sikafloor CureHard 24 is a transparent surface hardener, dustproofer, sealing and curing compound for concrete. Sikafloor CureHard 24 is a high solids, one part, clear sodium silicate liquid to cure, harden and seal fresh or hardened concrete.
Uses:
- Horizontal old or new concrete surfaces, where a hard surface with light to moderate abrasion resistance is required e.g. warehouses, industrial plants, stores, shopping malls, parking structures, service stations, hangars etc.
- On concrete slabs where no specific curing efficiency or standards are required
- Suitable for interior or exterior applications
- Dust-proofing of prefabricated concrete elements.
- Suitable for protection against ingress (Principle 1, method 1.2 of EN 1504-9).
- Suitable for physical resistance (Principle 5, method 5.2 of EN 1504-9).
Features and Benefits:
- Ready to use
- Easy to apply
- Improved chemical and abrasion resistance compared to untreated concrete
- Reduced dusting of concrete floors
- Reduced loss of water of new concrete while setting
- Improves cleanability
- Non-yellowing
- Good penetration
- Solvent free
- Colourless and odourless
- Environmentally friendly
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Data sheet
- Manufacturer
- Sika
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete
- Application Method
- Spray
- Colour
- Clear
- VOC Levels
- Ultra-Low (5-49 g/l)
- Pack Size
- 25L
200L - Application
- Spray
- Coverage
- 4 - 7m² per litre
- Max. Application Temperature
- 35c
- Min. Application Temperature
- 5c
- Touch Dry
- 2 - 4 hours
- Resistance to chemicals
- Resistant
- Base Type
- Solvent-Free
- Suitable For Use On
- Concrete
- Application Method
- Spray
- Application Method
- Broom
- Manufacturer
- Sika
- Components
- 1K
- Product Usage Type
- Sealer
- Product Range
- Sikafloor
- Colour Family
- Clear
- Product Type
- Sodium Silicate
Questions
Question about the product
Pete Andrew on 2019-01-03 18:19:15 | Question:
A few years ago I used a Sika produce on a new screed, it was a two part solution which dried like glass. It was for fast track sealer so I could fit a timber floor on top without any problems with the moisture content of the screed effecting the timber. Do you still do such a product? I'm looking at an area of 110m2 |
Answer from Rawlins’ Technical Team:
Sika Primer MB may be the product you used? Coverage is 400–600 g/m² so to apply 1 coat to 110m² you would require 44-66kg. A second coat may be necessary depending on your substrate and requirements - see product data sheet (downloadable from the product page) for more details. | |
badral on 2018-08-10 08:34:08 | Question:
is it okay to apply curehard 24 on painted concrete floor |
Answer from Rawlins’ Technical Team:
No, it is for bare concrete only. | |
Andy driver on 2018-02-08 03:03:37 | Question:
Hi can you put a paint over the top of curehard 24 if so what products would you use |
Answer from Rawlins’ Technical Team:
Sikafloor CureHard 24 cannot be overcoated, it would need to be mechanically prepared by way of blasting before a coating system was applied. | |
julian jones on 2015-07-06 17:46:55 | Question:
I am looking at roughly 600m² of powerfloated concrete. Firstly I am going to degrease then lightly abrade the surface (as spec'd by Sika) before applying 2 coats of Sikafloor CureHard 24. Would you have more of an indication as to the meterage per litre based on this spec? |
Answer from Rawlins’ Technical Team:
We would recommend working on 5.5m² per litre/per coat. This would mean you would require 220lts (9 x 25lts) to apply 2 coats to 600m². | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sikafloor CureHard 24 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT