- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A one component higher efficiency, water-based curing, sealing and hardening compound for concrete floors. A one part water dispersed acrylic emulsion to cure, harden and seal fresh or hardened concrete, and can be used in exterior and interior application.
- Excellent moisture retention; meets requirements of ASTM C-309.
- Water dispersion.
- Suitable for indoor use where solvent-based products cannot be applied because of health and safety regulations.
- Helps control dusting for both new and existing concrete floor surfaces.
- Effectively cures and seals concrete surfaces in a single, economic operation.
- Non yellowing.
- Easy application by spray or roller.
Please Note: 200L pack size is available on a 7-10 Working Days delivery option only
Sikafloor ProSeal W is a one component higher efficiency, water-based curing, sealing and hardening compound for concrete floors. Sikafloor ProSeal W is used for optimum curing and sealing of fresh concrete floors and structures.
Uses:
- Sikafloor ProSeal W is used for optimum curing and sealing of fresh concrete floors and structures
- Curing compound in order to limit surface drying and cracking
- Provides curing and sealing for Sikafloor® dry shake hardeners
- Anti-dust treatment and improvement of the abrasion resistance of existing concrete surfaces
- Suitable for exterior and interior application
Features and Benefits:
- Excellent moisture retention; meets requirements of ASTM C-309
- Water dispersion
- Suitable for indoor use where solvent-based products cannot be applied because of health and safety regulations
- Helps control dusting for both new and existing concrete floor surfaces
- Effectively cures and seals concrete surfaces in a single, economic operation
- Non yellowing
- Easy application by spray or roller
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Data sheet
- Manufacturer
- Sika
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Water
- For Use On
- Concrete
- Application Method
- Brush
Roller
Spray - Colour
- Clear
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 25L
200L - Coverage
- 5 - 10m² per litre
- Max. Application Temperature
- 30c
- Min. Application Temperature
- 10c
- Touch Dry
- 45 mins
- UN Number
- N/A
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Components
- 1K
- Product Usage Type
- Sealer
- Product Range
- Sikafloor
- Colour Family
- Clear
- Product Type
- Acrylic
Questions
Question about the product
Ian Grant on 2018-03-26 17:38:37 | Question:
Dear Colleague, I would like to know how SIKA ProSeal W used to seal a smooth screed floor will dry? I would like to avoid a high gloss finish, but a light sheen/satin would be OK. The other product that has been recommended by the screed manufacturer (Cemfloor) is SIKA Proseal 90 PDS I would very much like to know your opinion regarding the final finish of each product. Many thanks for your help with this. Regards, Ian Grant |
Answer from Rawlins’ Technical Team:
Sikafloor ProSeal W will not be as high gloss as the other ProSeal's due to being waterbased. Therefore it will leave more of a sheen finish rather than a gloss. If in doubt carry out a small trial area in an inconspicuous area first. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sikafloor ProSeal W is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT