What degree of prep is needed when applying another coat of top coat over a new floor painted approx 12 months ago with minimal traffic on it (client wants a freshen up before full hand over ) Festool sand existing top coat and re apply top coat ?

Assuming the previously applied coating is clean, dry and sound abrading the surface will be sufficient for the floor to receive a new coating of Sikafloor 264 N.

What is your MFG's warranty for 264 system?

Sika can offer up to 5 years, however there are rules and procedures to follow in order for Sika to provide a material guarantee. If of interest you would need to contact our Technical Department on 0113 2455450 (option 2) or email technical@rawlinspaints.com with the details of your project.

How soon can you apply Sika floor 264 onto a new concrete floor?

The product data sheet (available to download from the attachments tab on the product page) states < 4 % pbw moisture content. Test method: Sika®-Tramex meter, CM-measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet). The concrete substrate must be sound and of sufficient compressive strength (minimum 25 N/mm2) with a minimum pull off strength of 1.5 N/mm2. Concrete substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and achieve an open textured surface.

Sikafloor 264 N

Reference 464536

Brand Sika

Search ID SIK1553

A 2 component, solvent free, high building coating and seal coat system from the extensive Sikafloor range. An economic, coloured epoxy for concrete and cement screeds with normal-heavy wear.

Good chemical and mechanical resistance.
Easy application.
Economical.
Liquid-proof.
Gloss finish.
Slip resistant surface applicable.

Please Note - This product is available subject to a 14-21 Working Day Lead Time.

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

£807.20(incl. VAT)

£672.67(ex. VAT)

Quantity

Please choose your colour

The Product may be Subject to Extended Lead Times

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

3 questions about the product

Description

Sikafloor 264 N is a two component, solvent free, high building coating and seal coat. An economic, coloured epoxy applied by roller for concrete and cement screeds with normal up to heavy wear. It also comes in a vast array of colours to suit your aesthetic needs.

Sikafloor 264 N has been instrumental in protecting underground and multi-storey car parks for over 40 years. They boast that 80% of the car park can remain open during refurbishment, and can be found in various car park multiplexes across Brighton, in Guildford, Chelmsford and the iconic Merrion shopping centre in Leeds.

Recommended Uses:

Storage rooms
Assembly halls
Maintenance workshops
Garages
Loading ramps
Multi-storey car parks
Hangars
Wet process areas (food and beverage)

Product Details

Reference 1553-857998

Data sheet

Manufacturer: Sika
For Use By: Professional Use
Interior / Exterior Use: Interior Use
Water / Solvent Based: Solvent
For Use On: Concrete
Cementitious Screeds
Sheen: Gloss
Colour: Fully Tintable
Single, Two or Three Pack: Two-Pack
Product Certifications: Particle Emission ISO 14644-1, Outgassing Behavior ISO 14644-8, Reaction to fire according to EN 13 501-1, Certificate of Conformity for Indirect Food Contact, Institut Fresenius, Report No. 3419034-01
Pack Size: 10KG, 30KG
Minimum Applied Thickness: 0.6mm
Maximum Applied Thickness: 3mm
Coverage: 3 - 4m² per kg
Min. Application Temperature: 10c
Touch Dry: 24 Hours
UN Number (Activator): UN2924
Resistance to chemicals: Resistant
Colour(s): Fully Tintable
Base Type: Solvent-Free
Suitable For Use On: Concrete
Suitable For Use On: Screeds
Finish: Textured
Application Method: Brush
Application Method: Roller
Application Method: Trowel
Application Method: Squeegee
Manufacturer: Sika
Components: 2K
Product Usage Type: Epoxy Coating
Product Range: Sikafloor
Colour Family: Green
Colour Family: Black
Colour Family: White
Colour Family: Grey
Fire Rating: EN 13501-1
Product Type: Epoxy

Attachments

Download

Safety Data Sheet Part A

Download

Safety Data Sheet Part B

Download

Product Data Sheet

Download

System Data Sheet (MultiDur ES-15)

Download

System Data Sheet (MultiDur ES-21)

Download

System Data Sheet (MultiDur EB-12)

Download

System Data Sheet (MultiDur EB-12 ECC)

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Graeme langers on 2022-05-02 13:00:18	Question: What degree of prep is needed when applying another coat of top coat over a new floor painted approx 12 months ago with minimal traffic on it (client wants a freshen up before full hand over ) Festool sand existing top coat and re apply top coat ?
	Answer from Rawlins’ Technical Team: Assuming the previously applied coating is clean, dry and sound abrading the surface will be sufficient for the floor to receive a new coating of Sikafloor 264 N.

Brian Stelly on 2019-04-25 21:40:14	Question: What is your MFG's warranty for 264 system?
	Answer from Rawlins’ Technical Team: Sika can offer up to 5 years, however there are rules and procedures to follow in order for Sika to provide a material guarantee. If of interest you would need to contact our Technical Department on 0113 2455450 (option 2) or email [email protected] with the details of your project.

Nigel Bridger on 2019-03-29 15:28:53	Question: How soon can you apply Sika floor 264 onto a new concrete floor?
	Answer from Rawlins’ Technical Team: The product data sheet (available to download from the attachments tab on the product page) states < 4 % pbw moisture content. Test method: Sika®-Tramex meter, CM-measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet). The concrete substrate must be sound and of sufficient compressive strength (minimum 25 N/mm2) with a minimum pull off strength of 1.5 N/mm2. Concrete substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and achieve an open textured surface.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Sikafloor 264 N is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Follow us on:

Sikafloor 264 N

Sikafloor 264 N

Product customisation

Your customization: Chosen Colour: RAL 7011 - Iron grey

Data sheet

Safety Data Sheet Part A

Safety Data Sheet Part B

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION