- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance.
- As a blast holding primer suitable for use in immersed and exposed conditions and overcoatable with a wide range of high performance systems.
- For use at both new construction and maintenance.
- Also for use as a tie coat on zinc silicate to prevent zinc salt formation on weathering and pinholing of subsequent high build topcoats.
International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering.
Intended Uses:
- As a blast holding primer suitable for use in immersed and exposed conditions and overcoatable with a wide range of high performance systems.
- For use at both new construction and maintenance.
- Also for use as a tie coat on zinc silicate to prevent zinc salt formation on weathering and pinholing of subsequent high build topcoats.
Data sheet
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent
- For Use On
- Steel, Stainless Steel, Galvanized Steel
- Application Method
- Airless Spray, Spray, Brush, Roller
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 20L
- Mixing Ratio
- 4 part(s) : 1 part(s) by volume
- Coverage
- 11.8m² per litre
- Recommended Thinner/Cleaner
- International GTA220
- Solids by Volume
- 47%
- VOC
- 450 g/lt
- Shelf Life (from date of manufacture)
- 12 months minimum at 25°C
- Recommended Dry Film Thickness
- 40 microns
- Recommended Wet Film Thickness
- 85 microns
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Pot Life
- 10°C: 17 hours, 15°C: 12 hours, 25°C: 8 hours, 40°C: 3 hours
- Hard Dry
- 10°C: 16 hours, 15°C: 12 hours, 25°C: 8 hours , 40°C: 1 hour
- Base Type
- Solvent-Based
- Base Type
- Epoxy
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Finish
- Matt
- Application Method
- Spray
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Atmospheric
- Usages
- Tie Coat
- Usages
- Immersion
- Usages
- Holding Primer
- Product Usage Type
- Primer
- Product Range
- Intergard
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 8 hours
Questions
Question about the product
Dean Wilson on 2021-03-05 09:00:20 | Question:
Could you tell me the average anchor profile for Intergard 269? |
Answer from Rawlins’ Technical Team:
This depends on the substrate, the recommendations are 40-75µm for carbon steel, average of 30µm for HDG steel, 25-85µm for aluminium and stainless steel. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Intergard 269 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
International Intercure 200HS
A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions. Primer and intermediate in just one coat Rapid recoat times Low temperature cure, cures down...
International Intercure 420
International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions. Excellent barrier protection as part of a high performance system Suitable for use in aggressive environments...
International Interfine 629HS
International Interfine 629HS is a low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention. Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide variety of aggressive environments including...
International Interfine 878
International Interfine 878 is a high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system. A step change in long term colour and gloss compared to...
International Interfine 979
International Interfine 979 significantly improves upon the gloss and colour retention exhibited by typical polyurethane finishes also displays the same corrosion resistance and has enhanced mechanical properties when compared to traditional epoxy technology. Excellent long term color and gloss retention Contains no free isocyanate Low...
International Intergard 251
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Intergard 345
International Intergard 345 is a two component, low VOC, high solids, fast curing epoxy primer/finish containing zinc phosphate anti-corrosive pigmentation. Suitable for use as a one or two coat primer/finish coating or as an intermediate over recommended anti-corrosive primers. High solids versatile epoxy High build rapid one coat...
International Intergard 475HS
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties. High solids epoxy intermediate Micaceous Iron Oxide variant for additional barrier protection...
International Intergard 740
International Intergard 740 is a two component epoxy finish coat. Suitable for brush, roller and spray application Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS &...
International Thinner/Equipment Cleaner GTA220
International Thinner/Equipment Cleaner GTA220 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
International Thinner/Equipment Cleaner GTA822
International Thinner/Equipment Cleaner GTA822 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
International Interseal 670HS
International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings. 4,800+ colours, inc. RAL, RAL Design...
International Interthane 870
International Interthane 870 is high build which means it can reduce the number of coats you require and keep costs to a minimum. Semi-gloss and available in 4,800+ colours (including RAL 9007 Grey Aluminium), International Interthane 870 delivers excellent cosmetics and extended recoatability in both new construction and as an industrial...
International Interthane 990
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...
International Interzinc 22
International Interzinc 22 is a two component, rapid recoat, inorganic zinc rich ethyl silicate primer and is part of the Interzinc 22 Series of products that deliver consistently fast re-coating across a choice of 85%, 80%, 77% or 65% minimum zinc content products. The variable zinc levels allow you to tailor your choice of product to meet...
International Interzinc 52
International Interzinc 52 is a two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. It has been designed to provide excellent corrosion resistance in both maintenance and new construction situations.
International Interzone 954
2 component, low VOC, high solids, modified epoxy barrier coat in 4,800+ colours designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces. A high film build, high solids, abrasion...
International Interzone 1000
International Interzone 1000 is one of the most proven and reliable glass flake epoxies on the market today, with documented in-service performance dating back almost 30 years. International Interzone 1000 provides outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore and inland environments.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...