- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
International Intergard 405 is a two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.
- Provide efficient sealing of zinc silicate primers in order to prevent pinholing of subsequent topcoats
- Can also be used for sealing zinc and aluminium metal spray either as a single coat system or prior to overcoating with a suitable topcoat where required
- Suitable for use as part of a coating system in a range of highly corrosive environments, including offshore structures, petrochemical and chemical plants, bridges, refineries, pulp and paper plants and power stations
International Intergard 405 is a two component epoxy sealer coat, pigmented with micaceous iron oxide. Formulated on proprietary polymer technology, which provides rapid cure and overcoating, even at low temperatures.
Intended Uses:
- To provide efficient sealing of zinc silicate primers in order to prevent pinholing of subsequent topcoats. Can also be used for sealing zinc and aluminium metal spray either as a single coat system or prior to overcoating with a suitable topcoat where required.
- International Intergard 405 is suitable for use as part of a coating system in a range of highly corrosive environments, including offshore structures, petrochemical and chemical plants, bridges, refineries, pulp and paper plants and power stations.
Data sheet
- Manufacturer
- International
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent
- For Use On
- Metal
- Application Method
- Airless Spray, Spray, Brush, Roller
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 1.5 part(s) : 1 part(s) by volume
- Coverage
- 15.2m² per litre
- Recommended Thinner/Cleaner
- International GTA220
- VOC
- 406 g/kg
- Shelf Life (from date of manufacture)
- 12 months minimum at 25°C
- Touch Dry
- 5°C: 30 minutes, 15°C: 20 minutes, 25°C: 15 minutes, 40°C: 10 minutes
- Recommended Dry Film Thickness
- 25 microns
- Recommended Wet Film Thickness
- 66 microns
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Hard Dry
- 5°C: 4 hours, 15°C: 2 hours, 25°C: 90 minutes, 40°C: 45 minutes
- Base Type
- Solvent-Based
- Base Type
- Epoxy
- Suitable For Use On
- Zinc
- Suitable For Use On
- Zinc Silicate Primers
- Suitable For Use On
- Aluminium Metal Spray
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Low Temperature
- Usages
- Atmospheric
- Usages
- MIO
- Usages
- Intermediate
- Product Usage Type
- Sealer Coat
- Product Usage Type
- Intermediate
- Product Range
- Intergard
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 90 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Intergard 405 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
International Intercure 420
International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions. Excellent barrier protection as part of a high performance system Suitable for use in aggressive environments...
International Interfine 629HS
International Interfine 629HS is a low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention. Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide variety of aggressive environments including...
International Intergard 400
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing.
International Intergard 410
International Intergard 410 is a high build, high performance, two component epoxy with excellent chemical and abrasion resistance. Suitable for use as part of a high performance coating system to provide an anti-corrosive barrier in areas where aggressive corrosion conditions prevail. 4,800+ colours, inc. RAL, RAL Design & Effect, BS,...
International Intergard 475HS
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties. High solids epoxy intermediate Micaceous Iron Oxide variant for additional barrier protection...
International Intergard 740
International Intergard 740 is a two component epoxy finish coat. Suitable for brush, roller and spray application Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS &...
International Thinner/Equipment Cleaner GTA220
International Thinner/Equipment Cleaner GTA220 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
International Thinner/Equipment Cleaner GTA822
International Thinner/Equipment Cleaner GTA822 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
International Interseal 670HS
International Interseal 670HS is a low VOC, two component high build, high solids surface tolerant epoxy maintenance coating, for application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings. 4,800+ colours, inc. RAL, RAL Design...
International Interthane 990
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...
International Interzinc 22
International Interzinc 22 is a two component, rapid recoat, inorganic zinc rich ethyl silicate primer and is part of the Interzinc 22 Series of products that deliver consistently fast re-coating across a choice of 85%, 80%, 77% or 65% minimum zinc content products. The variable zinc levels allow you to tailor your choice of product to meet...
International Interzinc 42
International Interzinc 42 is a two component, metallic zinc primer designed for use in maintenance situations and as a primer at new construction. To be used as part of a coating system for structures in aggressive environments in a wide range of industries.
International Interzinc 52
International Interzinc 52 is a two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. It has been designed to provide excellent corrosion resistance in both maintenance and new construction situations.
International Interzinc 72
International Interzinc 72 is a two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance both as a single coat and as a primer for a high performance coating system. Contains 90% zinc by weight in the dry film.
International Interzone 954
2 component, low VOC, high solids, modified epoxy barrier coat in 4,800+ colours designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces. A high film build, high solids, abrasion...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...