- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
International Interprime 160 is a phosphoric acid based mordant solution for treating galvanised steel. International Interprime 160 is for the chemical pretreatment of galvanised steel prior to the application of protective coating systems, in order to ensure good adhesion where blasting or abrasion is not possible.
International Interprime 160 is a phosphoric acid based mordant solution for treating galvanised steel. International Interprime 160 is for the chemical pretreatment of galvanised steel prior to the application of protective coating systems, in order to ensure good adhesion where blasting or abrasion is not possible.
International Interprime 160 is only recommended for etching galvanised surfaces. It is not suitable for the pretreatment of other non-ferrous metals such as aluminium.
This product contains phosphoric acid. Before commencing application reference should be made to the material safety data sheet (MSDS), and the appropriate personal protective equipment should be worn, e.g. gloves, goggles, face-mask etc.
Apply to a suitably prepared, clean galvanised surface and then allow to dry. The mordant solution will gradually react and the blue colour will change with the surface blackening. This should finally achieve a uniform dark grey colour. If this does not occur due to the presence of oils, grease, flux or passivation of the surface then this area will require abrasion and a second coat of Interprime 160.
Over-application will produce a dense black powdery layer which is not suitable for the application of subsequent topcoats. This will require either abrading or washing with fresh water to remove excess acid or powdery deposits, otherwise blistering and/or adhesion loss of topcoats can occur.
Thinning is not normally required. However, if application trials result in a dense black powdery surface, then Interprime 160 should be diluted with clean, potable water and further application trials undertaken.
It should be noted that in all circumstances galvanised steelwork is likely to require a similar coating thickness for adequate protection as might be needed on steel substrates. Application of thin films can result in penetration of this paint film by zinc salts in wet corrosive environments.
International Interprime 160 has the following specification approvals:
- Complies with UK Department of Transport Item No. 155
International Interprime 160 was originally formulated to meet the requirements of British Rail's "T-Wash" solution.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Data sheet
- Application
- Brush
- Coverage
- 20m² per litre
- Touch Dry
- 2 Hours
- Application Method
- Brush
- Product Usage Type
- Mordant Solution
- Product Range
- Interprime
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Interprime 160 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT