Can I use interthane 990 on asbestos wall sidings

Yes assuming the asbestos wall sidings are bare, clean, dry, sound and prepared as detailed in the technical data sheet it could be used. The asbestos wall sidings should be primed with one coat of International Interseal 670HS thinned down by 5% to aid penetration of the asbestos fibres. You can then overcoat with International Interthane 990 which can be mixed to many RAL, BS and NCS Colours in a Gloss finish.

Hello, is this paint suitable for touching up steel on marine cranes?

Yes assuming the previously applied paint was two pack. This is a two pack product which can be used as a maintenance finish applied by brush, roller or spray application. We would recommend to test on a small area for compatibility and adhesion prior to full application.

Please let me know interthane 990 can be used as deck coating on ships? Further any test data available for friction value ?

Thank you for the enquiry, this paint is mainly used for markings on decks, we have contacted you directly for more information.

Could you let us know the conductive resistance of Interthane 990? Thanks

International have not tested for conductive resistance, but based on the chemistry and pigmentation, they suggest this product is most likely an insulator.

Can you tell me the temperature range for this product. We have someone trying to use this on an application that is 296 degrees C. Sorry the product is Interthane 990 Thanks in advance.

The maximum operating temperature for the product is 120°C, but gloss levels and colour might be affected at temperatures of 80°C and above. Please contact our Technical Team with more information on the project and we can assist with a recommendation.

can it be used on aluminum surface?

This product cannot be applied to aluminium directly, we have contacted you by email for more information regarding this project.

Can it be used on wood

No, International have not tested the Interthane 990 on wood. Due to presence of water in the substrate they would not recommend using it over timber.

Hello Can you please let me know if you need a primer for this paint? Regards Ruth

International Interthane 990 should always be applied over a recommended anti-corrosive coating scheme. The primer surface should be dry and free from all contamination and Interthane 990 must be applied within the overcoating intervals specified (consult the relevant product data sheet). The following primers/intermediates are recommended for Interthane 990: Intercure 200 Intercure 200HS Intercure 420 Intergard 251 Intergard 269 Intergard 345 Intergard 475HS Interseal 670HS Interzinc 52 Interzone 505 Interzone 954 Interzone 1000

International Interthane 990

Reference PHA046

Brand International

Search ID INT1879

International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance finish.

4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS & the new NCS 2050 colours - including RAL 9006 White Aluminium
- NOTE: some strong red, orange and yellow shades may have lead times up to 10-14 working days. Contact our technical team for availibility before ordering on 0113 2455450 (option 2) or send a message to [email protected]
High performance acrylic polyurethane finish coat
Metallic colour range for high profile steelwork
Excellent brush, roller and spray characteristics
Good drying and handling characteristics
Flexible film gives a good resistance to mechanical damage
Extended overcoating

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Order a Colour Sample

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

Finish

£131.14(incl. VAT)

£109.28(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

8 questions about the product

Description

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990. You can specify and apply International Interthane 990 in a range of colours or as a metallic finish; both deliver high aesthetic impact.

Intended Uses

Suitable for use in both new construction and as a maintenance finish which can be used in a wide variety of environments including offshore structures, chemical and petrochemical plants, bridges, pulp and paper mills, and in the power industry.

Features & Benefits

4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS & the new NCS 2050 colours
High performance acrylic polyurethane finish coat
High quality reds, yellows and oranges
Metallic colour range for high profile steelwork
Excellent brush, roller and spray characteristics
Good drying and handling characteristics
Flexible film gives a good resistance to mechanical damage
Extended overcoating

International Interthane 990 has the following specification approvals:

Complies with UK Department of Transport Item No. 168

Product Details

Reference 1879-888740

Data sheet

For Use By: Professional Use
Application Method: Brush, Roller, Spray
Sheen: Gloss
Colour: Fully Tintable
Single, Two or Three Pack: Two-Pack
Pack Size: 5L, 20L
Touch Dry (at 20°C): 90 Mins
Coverage: 11.4m² per litre
Touch Dry: 90 mins
UN Number: UN1263
Base Type: Solvent-Based
Suitable For Use On: Steel
Suitable For Use On: Primed Surfaces
Finish: High Gloss
Application Method: Brush
Application Method: Roller
Application Method: Spray
Usages: Low Temperature
Usages: Atmospheric
Usages: Tough/Durable
Product Usage Type: Topcoat
Product Range: Interthane
Colour Family: Magnolia
Colour Family: White
Colour Family: Neutral
Colour Family: Anthracite Grey
Colour Family: Violet
Colour Family: Cream
Colour Family: Beige
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Colour Family: Red
Colour Family: Brown
Colour Family: Pink
Colour Family: Orange
Colour Family: Purple
Colour Family: Yellow
Colour Family: Off-White
Colour Family: Black
Categorised As: Metal Paints > Low Temperature Topcoats
Seasonal: Cold Weather
Product Type: Alkyd
Environment: Atmospheric
Environment: Low Temperature
Touch Dry/Dust Free (@ 20-25°C): 90 mins
Product Attributes: High Build
Product Attributes: Tough / Durable

Attachments

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

phil gaskell on 2023-09-03 11:14:56	Question: Can I use interthane 990 on asbestos wall sidings
	Answer from Rawlins’ Technical Team: Yes assuming the asbestos wall sidings are bare, clean, dry, sound and prepared as detailed in the technical data sheet it could be used. The asbestos wall sidings should be primed with one coat of International Interseal 670HS thinned down by 5% to aid penetration of the asbestos fibres. You can then overcoat with International Interthane 990 which can be mixed to many RAL, BS and NCS Colours in a Gloss finish.

PAMELA SCOTT on 2023-06-28 12:18:56	Question: Hello, is this paint suitable for touching up steel on marine cranes?
	Answer from Rawlins’ Technical Team: Yes assuming the previously applied paint was two pack. This is a two pack product which can be used as a maintenance finish applied by brush, roller or spray application. We would recommend to test on a small area for compatibility and adhesion prior to full application.

Thilina sampath jayathilaka on 2021-12-01 07:59:12	Question: Please let me know interthane 990 can be used as deck coating on ships? Further any test data available for friction value ?
	Answer from Rawlins’ Technical Team: Thank you for the enquiry, this paint is mainly used for markings on decks, we have contacted you directly for more information.

Carlos Ortiz on 2021-09-28 10:05:10	Question: Could you let us know the conductive resistance of Interthane 990? Thanks
	Answer from Rawlins’ Technical Team: International have not tested for conductive resistance, but based on the chemistry and pigmentation, they suggest this product is most likely an insulator.

Gregory Penn on 2021-03-03 22:45:06	Question: Can you tell me the temperature range for this product. We have someone trying to use this on an application that is 296 degrees C. Sorry the product is Interthane 990 Thanks in advance.
	Answer from Rawlins’ Technical Team: The maximum operating temperature for the product is 120°C, but gloss levels and colour might be affected at temperatures of 80°C and above. Please contact our Technical Team with more information on the project and we can assist with a recommendation.

orlando on 2021-02-09 13:47:33	Question: can it be used on aluminum surface?
	Answer from Rawlins’ Technical Team: This product cannot be applied to aluminium directly, we have contacted you by email for more information regarding this project.

sean on 2018-08-23 08:11:10	Question: Can it be used on wood
	Answer from Rawlins’ Technical Team: No, International have not tested the Interthane 990 on wood. Due to presence of water in the substrate they would not recommend using it over timber.

Ruth on 2016-10-06 09:27:53	Question: Hello Can you please let me know if you need a primer for this paint? Regards Ruth
	Answer from Rawlins’ Technical Team: International Interthane 990 should always be applied over a recommended anti-corrosive coating scheme. The primer surface should be dry and free from all contamination and Interthane 990 must be applied within the overcoating intervals specified (consult the relevant product data sheet). The following primers/intermediates are recommended for Interthane 990: Intercure 200 Intercure 200HS Intercure 420 Intergard 251 Intergard 269 Intergard 345 Intergard 475HS Interseal 670HS Interzinc 52 Interzone 505 Interzone 954 Interzone 1000

IMPORTANT SHIPPING & DELIVERY INFORMATION

International Interthane 990 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

£25.93 (incl. VAT)

Shop now

In Stock and Available for Delivery

COVERAGE CALCULATOR
Units
Film Thickness
Total area²
Or enter length and width dimensions:
Length
Width

Follow us on:

International Interthane 990

International Interthane 990

Product customisation

Your customization: Chosen Colour: BS 00 E 55 - White

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Surface Preparation Kits for Steel