- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
International Intertherm 228HS is a highly crosslinked, two component, high build epoxy phenolic coating suitable for exposure in a wide range of highly corrosive environments, including insulated and uninsulated carbon and stainless steel for use on the exterior of pipework, process vessels etc., operating at temperatures up to 230°C (446°F).
International Intertherm 228HS is a highly crosslinked, two component, high build epoxy phenolic coating which combines properties of corrosion and chemical resistance when used in high temperature service. International Intertherm 228HS is a next generation epoxy phenolic coating based upon novolac resin technology.
Intended Uses
- International Intertherm 228HS has been specifically designed to provide a corrosion resistant barrier when used to protect steelwork beneath thermal insulation in areas subjected to wet and dry cycling.
- Suitable for exposure in a wide range of highly corrosive environments, including insulated and uninsulated carbon and stainless steel for use on the exterior of pipework, process vessels etc., operating at temperatures up to 230°C (446°F).
- International Intertherm 228HS has excellent resistance to "thermal shock" experienced during rapid temperature cycling.
Colours
- White is nearest to RAL 9010
- Grey is nearest to RAL 7004
- Red Oxide is nearest to BS 4800 04 C 39
Data sheet
- Manufacturer
- International
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent
- For Use On
- Steel, Stainless steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Eggshell
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
- Heat Resistance (up-to)
- 230°C
- Touch Dry
- 5 Hours
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Stainless Steel
- Finish
- Eggshell
- Application Method
- Roller
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Primer & Topcoat
- Product Range
- Intertherm
- Colour Family
- Grey
- Colour Family
- White
- Colour Family
- Red
- Heat Resistance
- Up To 300°C
Geoff Gordon on 2019-06-26 18:14:28 | Question:
What is the maximum temperature of the substrate that 228 can be applied by brush/roller? |
Answer from Rawlins’ Technical Team:
When applied by brush/roller then maximum surface temperature should be up to 70-80°C. Above that temperature only airless spray is recommended and we have a seperate document available to explain this process if required. | |
Alan Farquhar on 2018-02-21 07:33:19 | Question: are the white and grey Intertherm 228 a gloss finish? also what would you recommend as an over coat for Intertherm 228 red oxide to give a gloss finish |
Answer from Rawlins’ Technical Team: Intertherm 228HS is a two component high build epoxy phenolic coating leaving an eggshell finish suitable for use up to 230°C. If a cosmetic finish is required the following top coats can be used:
Maximum overcoating time should be kept to minimum (1-2 days) and any additional abrasion of the second coat of Intertherm 228HS will create a better bond between coatings. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Intertherm 228HS is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
International Thinner/Equipment Cleaner GTA822
International Thinner/Equipment Cleaner GTA822 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...