- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
International Intertherm 875 is a single component, intermediate temperature finish for use in a wide range of industrial environments as a heat resistant finish coat for application over properly primed steelwork in both new construction and as a maintenance coating at temperatures up to 260°C (500°F).
International Intertherm 875 is a single component, intermediate temperature finish based on temperature resistant silicone and acrylic resins with thermally stable pigmentation.
Intended Uses
- International Intertherm 875 is for use in a wide range of industrial environments including petrochemical plants, oil refineries, offshore structures, chemical plants and power stations. Suitable for areas subject to intermediate service temperature that require a coloured finish.
- A heat resistant finish coat for application over properly primed steelwork. For use at both new construction and as a maintenance coating.
- Suitable for steelwork operating at temperatures up to 260°C (500°F). Does not require heating between coats.
Data sheet
- Manufacturer
- International
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 20L
- Heat Resistance (up-to)
- 260°C
- Touch Dry
- 30 mins
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Gloss
- Application Method
- Spray
- Application Method
- Roller
- Application Method
- Brush
- Product Usage Type
- Topcoat
- Product Range
- Intertherm
- Colour Family
- Grey
- Heat Resistance
- Up To 300°C
KELLY WILSON on 2021-07-26 15:37:58 | Question:
Hi Could you tell me what would be the surface profile when using this product. I cannot find it on the data sheets. kind regards kelly |
Answer from Rawlins’ Technical Team:
This information in is the surface preparation section in the Technical Data Sheet, this can be found in the data sheets tab. The substrate must be blast prepared to SA2.5. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Intertherm 875 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT